15 Questions
Which organization develops standards to enhance public safety and health?
CSA Group
What is the main purpose of the CSA Group?
Developing safety standards
Who are the members of the B51 Technical Committee?
All of the above
Which organization publishes the CSA Standard B51 - 14?
CSA Group
What is the purpose of updating the CSA Group standards?
To maintain their relevance
Why is it important to include the year of a standard or code when referencing it?
To ensure accuracy and avoid confusion
What is the focus of Chapter 1 in the Alberta's Pressure Equipment Safety Regulation?
Looking up references in CSA-B51 and CSA-B52
Which organization is NOT listed as a reference publication in CSA-B51?
National Fire Protection Association (NFPA)
According to CSA-B51, who is responsible for ensuring pressure equipment is operated safely?
The owner of the pressure equipment
Where can information on CRNs and provincial designations be found in CSA-B51?
General Requirements section
What is the reference for the definition of an act in CSA-B51 Clause 3?
CSA-B51-09, Part 1, Clause 3
Which one of these is a requirement for boiler inspection openings?
The inside dimension of the opening must be at least 305 mm x 406 mm.
Which one of these is a requirement for blowoff vessels?
The temperature of water discharging from a blowoff vessel must be 65°C or lower.
Which one of these is a requirement for steam boilers not in continuous attendance of a qualified operator?
They must be equipped with at least two low-water fuel cut-offs.
Which one of these is a requirement for pressure relief devices in power boilers with steam pressure above 15 psig?
They must be serviced at least every five years.
Test your knowledge of referencing documents and finding specific clauses and sub-clauses. This quiz will challenge you to identify the correct reference for a given definition in a standard.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free