30 Questions
Which strategy prefers the best-performing member based on the configured quality criteria?
Best Quality
Which strategy prefers the member that meets the configured SLA target?
Lowest Cost SLA
Which strategy supports traffic load balancing across multiple members?
Maximise Bandwidth SLA
Which strategy prefers members that were configured first?
Manual
Which strategy steers traffic to one member only?
Best Quality
Which strategy prefers the first member in the configuration that is alive?
Manual
Which strategy does not consider member metrics for member preference?
Manual
Which strategy considers member cost and configuration order as tiebreakers?
Lowest Cost SLA
Which strategy uses hashing algorithm for load balancing across preferred members?
Maximise Bandwidth SLA
Which strategy checks that the preferred member has a valid route to the destination?
Best Quality
Which one of these is used as a tiebreaker for ECMP routes?
The Priority setting
Which one of these is moved to the top of the oif list when T INET 0 is detected dead?
T_INET_1
Which one of these has higher priority based on the Interface Preference list configuration?
Members configured first in the list
Which one of these is moved to the bottom of the list when a member is detected dead?
The member with the highest priority
Which one of these is used as the priority of static routes for members?
The member configuration priority
Which one of these is used as a tiebreaker for preferred member election?
The member configuration priority
Which one of these is assigned the sequence number 1 in the example shown on the slide?
T_INET_1
Which one of these is assigned the sequence number 2 in the example shown on the slide?
T_INET_0
Which one of these refers to the member priority based on the Interface Preference list configuration?
The member with the highest priority
Which one of these has higher priority over those configured last?
Members configured first in the list
Which configuration assigns a route tag of 10 to prefixes that match the community 65000:10?
hub-lan-rm
What is the purpose of the SD-WAN rule with ID 2?
Steer corporate traffic
What does the command 'get router info bgp community 65000:10' display?
Learned prefixes by community
Which subnet is included in the output of the command 'get router info bgp community 65000:10'?
10.1.0.0/24
What is the route tag assigned to the prefix 10.1.0.0/24?
10
What is the purpose of the route map 'hub-lan-rm'?
Assign a route tag of 10 to prefixes
Which command should be used to check the SD-WAN rule status?
diagnose sys sdwan service 2
What is the destination of the SD-WAN rule with ID 2?
10.1.0.0/24
Which configuration assigns the prefix 10.10.0.0/24 as a destination?
lan-acl
What is the prefix length of the destination 10.10.0.0/24?
24
Test your knowledge of route tag configuration in BGP with this quiz. Learn about branches, community lists, route maps, and BGP neighbor configurations. Challenge yourself to understand how to configure route tags and match communities in a BGP environment.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
