Mastering 2D Volumetrics in RMS
14 Questions
2 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which of the following is NOT a method for obtaining 2D volumes before constructing a detailed 3D model?

  • 3D volumetrics (correct)
  • 2D volumes above a 'cut' surface
  • 2D volumetrics
  • Bulk volume versus depth report(s)
  • What type of maps can be used as input for obtaining 2D volumes?

  • Pressure maps
  • Structural maps (correct)
  • Temperature maps
  • Saturation maps
  • What caution should be exercised when presenting pore-volume/HCPV/STOOIP/GIIP numbers based on 2D volumes?

  • They are not accurate
  • They are not useful for reservoir analysis
  • They are based on averaged properties (correct)
  • They are only valid for certain depths
  • Which panel in the software displays the values for cut and fill volume?

    <p>Cut and Fill Panel</p> Signup and view all the answers

    How can you calculate volumetrics in 2D?

    <p>By using property input and 2D maps</p> Signup and view all the answers

    What does the 2D volumetrics workflow allow you to do?

    <p>Calculate preliminary 2D volumetrics quickly</p> Signup and view all the answers

    Which job(s) can run as proper jobs in the software?

    <p>Only the last two jobs in the workflow</p> Signup and view all the answers

    Which scenario is described in the text?

    <p>Generating a 3D model of a field</p> Signup and view all the answers

    What information can 2D volumes based on structural maps provide?

    <p>Volumes and uncertainty in depth and contacts</p> Signup and view all the answers

    Which method is NOT mentioned for obtaining 2D volumes before constructing a detailed 3D model?

    <p>3D volumetrics</p> Signup and view all the answers

    What can be found in the clipboard when creating cut and fill surfaces?

    <p>i. Cut surface</p> Signup and view all the answers

    What can be calculated within a user-defined polygon in the bulk volume versus depth report?

    <p>Volumes per user specified depth range and increment</p> Signup and view all the answers

    What can be used as a constant between any specified layers in 2D volumetrics?

    <p>A porosity 2D map</p> Signup and view all the answers

    What type of output format can be generated in the Volumetrics table viewer?

    <p>Excel format</p> Signup and view all the answers

    More Like This

    2D OOP CSP 103 Test
    50 questions

    2D OOP CSP 103 Test

    TrustingPeridot avatar
    TrustingPeridot
    Classifying 2D Shapes Flashcards
    20 questions
    Introduction to 2D Animations
    48 questions
    Use Quizgecko on...
    Browser
    Browser