Podcast
Play an AI-generated podcast conversation about this lesson
Questions and Answers
What is the first step in starting the engine of the 6in grinder machine?
What is the first step in starting the engine of the 6in grinder machine?
- Open the fuel shut off on the gas tank
- Place the throttle lever at the 'fast idle' position
- Connect the engine kill button cord to the operator and machine (correct)
- Move the choke to closed
What is the correct angle for the cutters during asphalt cutting set-up with the 6in grinder machine?
What is the correct angle for the cutters during asphalt cutting set-up with the 6in grinder machine?
- Parallel to the ground
- Perpendicular to the ground
- At an angle less than 2 degrees to the ground (correct)
- At an angle greater than 2 degrees to the ground
What should be done after the engine of the 6in grinder machine is turned off?
What should be done after the engine of the 6in grinder machine is turned off?
- Clean the entire exterior of the machine before it cools down
- Adjust the engine throttle to the high setting
- Raise the cutter head to engage the lever so that the cutter head is off the ground (correct)
- Move the machine away from the current position to inspect the cut
Flashcards are hidden until you start studying
