Manufacturing Process of Sheet and Plate Metal Products
17 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the primary purpose of shearing in press-working?

  • To cut large sheets along a straight line (correct)
  • To shape a sheet metal into a specific form
  • To separate a piece from surrounding stock
  • To create a slug from a sheet metal
  • What is the typical orientation of the cutting edges in a shearing operation?

  • Perpendicular to each other
  • At a 45-degree angle to each other
  • Inclined to each other (correct)
  • Parallel to each other
  • What is the resulting piece called after a shearing operation?

  • Blank
  • Slug
  • Sheet metal (correct)
  • Scrap
  • What is the main difference between shearing and blanking operations?

    <p>The purpose of the operation</p> Signup and view all the answers

    What is the shape of the cut in a shearing operation?

    <p>Straight</p> Signup and view all the answers

    What is the primary purpose of shearing in sheet metal processing?

    <p>To separate large sheets into smaller parts</p> Signup and view all the answers

    What is the result of the punch compressing and penetrating into the work during the shearing process?

    <p>A smooth cut surface</p> Signup and view all the answers

    What is the final stage of the shearing process?

    <p>Sheet separation</p> Signup and view all the answers

    What is the name of the process that involves cutting part perimeters out of sheet metal?

    <p>Blanking</p> Signup and view all the answers

    What is the advantage of sheet metal parts in terms of cost?

    <p>Relatively low cost</p> Signup and view all the answers

    What is the stage of the shearing process where the punch begins to push into the work?

    <p>Plastic deformation</p> Signup and view all the answers

    What is the draft in flat rolling terminology?

    <p>The amount of thickness reduction</p> Signup and view all the answers

    What is the reduction in flat rolling terminology?

    <p>The draft expressed as a fraction of starting stock thickness</p> Signup and view all the answers

    What type of rolling produces a contoured cross section rather than a flat one?

    <p>Shape rolling</p> Signup and view all the answers

    What is the primary product of extrusion?

    <p>Long parts of uniform cross sections</p> Signup and view all the answers

    What is the term for the small portion of billet that cannot be forced through the die opening in direct extrusion?

    <p>Butt</p> Signup and view all the answers

    What is the primary difference between direct and indirect extrusion?

    <p>The direction of the ram motion</p> Signup and view all the answers

    More Like This

    Welding as a Joining Process Quiz
    5 questions
    Joining Processes in Metal Fabrication
    3 questions
    Welding Fundamentals and History
    40 questions
    Fundición: Proceso y Aplicaciones
    40 questions
    Use Quizgecko on...
    Browser
    Browser