LOLER Regulation 10 Quiz

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What must a person conducting a thorough examination do upon discovering a defect in lifting equipment?

Notify the employer immediately of any danger (correct)

Ignore the defect if it's minor

Ensure the equipment is used until a formal report is made

Complete the report within one week

What is required of an employer when notified of an imminent risk by the Competent Person?

Report the defect to the insurance company only

Proceed with repairs without stopping equipment use

Ensure that the lifting equipment is not used until the defect is fixed (correct)

Wait for a written report to be submitted before taking action

How long must an employer keep the EC Declaration of Conformity for lifting equipment?

Indefinitely, unless the equipment is no longer operated

For as long as they operate the lifting equipment (correct)

Only until the first inspection is completed

For a maximum of five years from acquisition

For how long must reports of thorough examinations of lifting accessories be kept?

For two years after the report is made Signup and view all the answers

What is the purpose of Regulation 10 under LOLER?

To outline the process for reporting defects in lifting equipment Signup and view all the answers

What should be included in the report of a thorough examination?

Information specified in schedule 1 Signup and view all the answers

Who is responsible for sending a report to the relevant enforcing authority when a serious defect is found?

The Competent Person performing the examination Signup and view all the answers

What does LOLER specifically refer to when discussing lifting equipment?

Thorough Examination and Inspection, potentially including a test Signup and view all the answers

What was the principal aim of the 'New Approach' adopted by the European Union?

To harmonize technical rules affecting product health and safety. Signup and view all the answers

Which of the following best describes the purpose of the Electromagnetic Compatibility Directive?

To prevent interference between electrical equipment and ensure equipment immunity. Signup and view all the answers

What do the Electromagnetic Compatibility Regulations ensure?

That electromagnetic disturbance remains at acceptable levels for proper equipment function. Signup and view all the answers

Which of the following is NOT addressed by the Electromagnetic Compatibility Regulations?

Safety-related matters of electrical equipment. Signup and view all the answers

What implication does a CE mark on a product signify?

It implies compliance with all relevant directives. Signup and view all the answers

How long ago was the 'New Approach' initiated by the European Union?

20 years ago. Signup and view all the answers

What type of equipment is primarily affected by the Electromagnetic Compatibility Directive?

Electrical and electronic equipment with potential electromagnetic disturbance. Signup and view all the answers

Which directive works alongside the Electromagnetic Compatibility Directive to ensure safe working practices?

The Electricity at Work Regulations. Signup and view all the answers

What is the designation for Class A zinc finish?

A Signup and view all the answers

What influence does a daily operator check have on the safety of manual lifting machines?

It is less significant than the Competent Person's examination. Signup and view all the answers

Which standard should local or application-specific regulations typically follow?

Original equipment manufacturer's guidelines Signup and view all the answers

What should be done if the rope cannot be kept clean?

Consider an electromagnetic wire rope inspection method. Signup and view all the answers

Which standard can be used in the absence of the original equipment manufacturer’s criteria for determining rope serviceability?

BS ISO 4309 Signup and view all the answers

What is the primary standard for the thorough examination of Overhead Travelling Cranes in the UK?

BS 7121-2-7:2012 Signup and view all the answers

Which prefix is commonly used alongside the ISO number for British Standards?

BS Signup and view all the answers

Which standard outlines the design for bridge and gantry cranes?

BS EN 15011 Signup and view all the answers

Which document is used to specify minimum criteria for the inspection of overhead cranes?

ISO 9927-1 Signup and view all the answers

What does BS ISO 4309 address?

Discard criteria for wire ropes Signup and view all the answers

Which of the following standards is acknowledged for crane classification?

ISO 4301-1 Signup and view all the answers

Which standard would be relevant for monitoring the design working period of cranes?

BS ISO 12482 Signup and view all the answers

What is the focus of BS EN 13001?

General design of cranes Signup and view all the answers

When is manual operation of lifting equipment considered appropriate?

Infrequent operation is called for. Signup and view all the answers

What may happen if examiners of lifting equipment are not familiar with national regulations?

They could face prosecution for legal breaches. Signup and view all the answers

Which of the following is NOT one of the categories of standards related to overhead travelling cranes?

Safety Procedures Signup and view all the answers

What do manufacturing standards for overhead travelling cranes primarily cover?

Safe working loads and materials. Signup and view all the answers

Under which category would you find standards for cranes focusing on design criteria?

Design Signup and view all the answers

Which ISO standard type is generally recognized internationally?

Performance standards Signup and view all the answers

What should a 'Competent Person' ensure when examining lifting equipment?

They have access to relevant standards. Signup and view all the answers

Which of the following describes heavy load situations that necessitate power operation?

Rapid and frequent loading operations. Signup and view all the answers

Study Notes

Lifting Operations and Lifting Equipment Regulations (LOLER)

Regulation 10 mandates thorough examination reports, requiring immediate notification of defects posing danger to personnel.
Reports must be documented, signed, and sent to the employer, including a copy sent to relevant authorities if serious risks are present.
Employers must prevent the use of defective lifting equipment until issues are resolved.

Keeping of Information

Employers must retain the EC Declaration of Conformity while operating lifting equipment and ensure reports are available for inspection.
Reports for lifting equipment should be kept until the equipment ceases operation; lifting accessory reports must be retained for two years.

LOLER and Competent Persons

LOLER includes requirements for thorough examination and inspection, allowing testing as part of the process.

Electromagnetic Compatibility Directive

The EMC Directive 2004/108/EC aims to reduce trade barriers by standardizing health and safety rules for electrical products.
UK implements the EMC Directive through the Electromagnetic Compatibility Regulations, ensuring equipment does not interfere with telecommunications while maintaining immunity from disturbance.
Compliance indicated by CE marking confirms adherence to relevant directives.

Manual vs. Power Operation

Manual operation is suitable for light, infrequent loads with precision placement; power operation is advised for heavy, frequent, or rapid lifting tasks.

Standards for Overhead Travelling Cranes

Standards are categorized into Design, Classification, Gantries, Thorough Examination, and Other Relevant Standards.
Key standards include:
- BS EN 13001 for general crane design.
- BS 7121-2-7: 2012 for thorough examination protocols.

Types of Standards

Manufacturing standards define dimensions and safe working loads (e.g., BS EN 14492).
Performance standards set product criteria (e.g., BS EN 13001); ISO standards often serve as a basis for national standards.
British Standards are often derived from ISO standards by adding the prefix 'BS' to the ISO number.

Wire Rope Safety

Wire rope examination is crucial for safe operation, influenced by competent persons and daily operator checks.
Cleanliness of wire ropes is essential; if impractical, alternative inspection methods like electromagnetic methods may be employed.
BS ISO 4309 provides criteria for assessing the serviceability of load ropes; refer to BS EN 13411 for terminations in steel wire ropes.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Test your understanding of Regulation 10 of the Lifting Operations and Lifting Equipment Regulations (LOLER). This quiz focuses on the requirements for reporting defects and ensuring safety in lifting operations. Brush up on your knowledge to maintain compliance and safety standards.