ლითონის კონსტრუქციები

Industrial Building Architecture Structures Exam Questions

• Question 1: A longitudinal skylight structure does not include: Supports, Beams, Bracing, Upper beam.

• Question 2: Which types of stairs are not suitable for industrial (factory) buildings? Standard, service, fire, emergency.

• Question 3: Which types of roofs are not used in large-span industrial buildings? Round, flat, space framed, suspended.

• Question 4: What are the main types of large-span space structures? Shell, vault, folded plate, frame.

• Question 5: Which is the radial (radial) scheme for industrial plant arrangement in the city? 1-1, 2-δ, 3-8.

• Question 6: Which is the longitudinal (linear) scheme for industrial plant arrangement in the city? 1-1, 2-δ, 3-8.

• Question 7: Which is the transverse (depth) scheme for industrial plant arrangement in the city? 1-1, 2-δ, 3-8.

• Question 8: Which element is not part of a well-connected transverse frame system? Foundation, roof tiles, beams, columns.

• Question 9: Which element is not part of a well-connected longitudinal structural system? Foundation beam, intermediate beam, frame, boundary structures.

• Question 10: What is not an advantage of reinforced concrete structures? Large mass, high fire resistance, low metal demand, high moisture resistance.

• Question 11: What is not an advantage of metal structures? High strength, fast assembly, resistant to damp conditions, and repairable.

• Question 12: What is not made of metal in a metal frame structure? Foundation beams, columns, roof frames, roof beams.

• Question 13: What is not made of metal in a metal frame structure? Roof frames, foundation, intermediate beams, boundary structures.

• Question 14: What is not used in a metal supporting roof structure? Metal frame, metal frame, metal intermediate beams, metal inclined beams.

• Question 15: What is not a structural component of a metal frame? Top and bottom chords, members, profiled metal sheets, beams.

• Question 16: Which characteristic may not be present in a metal framed structure? Single or multiple spans, horizontal or inclined upper chords, with a sub-frame, single or grid.

• Question 17: Which type of transport equipment is not used in industrial buildings? Cable cars, electric railways, elevators, mechanical.

• Question 18: Which roofing system is dependent on atmospheric air pressure? 1-1, 2-δ, 3-8, 4- -, 5-ง.

• Question 19: Which industrial building layout has light-transmitting ventilating skylights? 1-1, 2-, 3-8, 4-ต.

• Question 20: Which layout has zero connection of structural elements with load-bearing axis when Q ≤ 30 tons, column height ≤ 14.4 m? 1-1, 2-δ, 3-8, 4- -, 5-g, 6-3.

• Question 21: Which layout features connection at 250, load ≥ 30 tons, column height ≥ 15.6m? 1-1, 2-δ, 3-8, 4- -, 5-g, 6-3.

• Question 22: Which layout features tower connection to the transverse axis? 1-1, 2-δ, 3-8, 4- -, 5-0, 6-3.

• Question 23: Which layout features connecting intermediate columns to a transverse axis during thermal expansion? 1-1, 2-δ, 3-8, 4- -, 5-g, 6-3.

• Question 24: Which layout features connecting intermediate columns to a transverse axis with inserts? 1-1, 2-δ, 3-8, 4- -, 5-0, 6-3.

• Question 25: Which layout features connecting columns along a longitudinal thermal joint? 1-1, 2-δ, 3-8, 4- -, 5-ง, 6-3.

• Question 26: Which layout features connecting columns during a transverse thermal expansion? 1-1, 2-δ, 3-8.

• Question 27: Which layout features connecting columns during a longitudinal thermal expansion? 1-1, 2-δ, 3-8.

• Question 28: Which layout features connecting a column to a tower wall? 1-1, 2-δ, 3-8.

• Question 29: Which layout shows a foundation-column joint? 1-1, 2-δ, 3-8, 4-, 5-g.

• Question 30: Which layout shows a column-frame joint? 1-1, 2-δ, 3-8, 4-, 5-0.

• Question 31: Which layout shows a sub-frame-frame joint? 1-1, 2-δ, 3-8, 4-, 5-g.

• Question 32: Which layout shows a frame-roof tile joint? 1-1, 2-δ, 3-8, 4-, 5-0.

• Question 33: Which layout shows a roof tile-wall panel joint? 1-1, 2-δ, 3-8, 4-, 5-g.

• Question 34: Which layout shows a purlin column? 1-1, 2-d, 3-8, 4-ต.

• Question 35: Which layout shows columns during a crane operation or pendant crane? 1-1, 2-d, 3-8, 4-ต.

• Question 36: Which layout shows two-legged columns during a bridge crane operation with Q ≤ 50? 1-1, 2-d, 3-8, 4-ต.

• Question 37: Which layout shows full-section columns with bridge crane operation with Q ≤ 20? 1-1, 2-d, 3-8, 4-ต.

• Question 38: Concerning noise and vibration in industrial buildings, which of the following is not true? Reduces work efficiency, alters temperature regime, increases occupational injuries, causes occupational illnesses.

• Question 39: For optimal air circulation in industrial buildings, how should windows be oriented in relation to prevailing winds? Parallel, 45 degrees, perpendicular.

• Question 40: What is not a requirement for industrial building walls? Maintaining a temperature regime, maintaining stability and strength, maintaining structural integrity, maintaining resistance to a hostile environment.

• Question 41: From a structural point of view, what type of wall is not used for industrial buildings? Large-panel, small-panel, monolithic, suspended.

• Question 42: What is not a type of industrial building wall based on static loading? Monolithic, load-bearing, self-supporting, suspended.

• Question 43: Which of the following is not a panel type in a wall? Retaining, bracing, parapet, cornice.

• Question 44: In self-supporting large-panel industrial buildings, which component does not receive load transfer? Middle wall panel, foundation panel, foundation beams, column.

• Question 45: What is not a factor in determining the water collection area on a roof for a single gutter? Environmental conditions, waterproofing paint, roofing type, roof slope.

• Question 46: Which material is not suitable for a vapor barrier membrane? Thin metal sheet, roofing felt, felt, waterproof paint.

• Question 47: Which material is not used for an effective thermal insulator for a lightweight metal roof? Roofing felt, polystyrene foam, polyurethane foam, lightweight polymer material.

• Question 48: For a reinforced concrete roof, which of the listed materials is not used as a thermal insulator for the perimeter structure? Vapor barrier, lightweight concrete, fiberboard, mineral wool.

• Question 49: What is not a structural element of a metal profiled roof? Metal inclined beams, double "channel" beams, profiled metal perimeter structure, steel structure.

• Question 50: What is an advantage not inherent in multi-story industrial buildings as opposed to single-story structures? Assembly, evacuation, less construction area, load on intermediary roofing.

• Question 51: What is a disadvantage of multi-story industrial buildings as opposed to single-story structures? Fewer perimeter structures, smaller construction area, assembly, architectural appeal.

• Question 52: Which industry sector does not employ multi-story industrial buildings? Light manufacturing, electric appliances, metallurgy, food processing.

• Question 53: Which layout shows a column-beam connection joint? 1-1, 2-δ, 3-8.

• Question 54: Which layout shows a column-roof tile connection joint? 1-1, 2-δ, 3-8.

• Question 55: Which layout shows a roof tile-beam connection joint? 1-1, 2-δ, 3-8.

• Question 56: Which building type constitutes an administrative-technical group based on its purpose? Sanitary-residential, canteen, drafting office, medical services.

• Question 57: Which building type constitutes a residential group based on its purpose? Medical facilities, learning laboratories, design offices, meeting rooms.

• Question 58: Which of the given floor layouts in industrial buildings is completely on the ground? 1-1, or 20, or 3-8, or 4-ต.

• Question 59: Which of the floor layouts in industrial buildings is directly on the roof? 1-1, 2-δ, 3-8, 4-ต.

• Question 60: Which of the floor layouts in industrial buildings is on a single-span roof? 1-1, 2-δ, 3-8, 4-ต.

• Question 61: Which of the floor layouts in industrial buildings is directly on the ground with a single material? 1-1, 2-δ, 3-8, 4-ต.

• Question 62: Which of the given layouts is a clay-concrete floor? 1-1, 2-, 3-8, 4- , 5- g, 6-3.

• Question 63: Which layout involves a clay and gravel floor? 1-1, 2-δ, 3-8, 4- , 5- g, 6-3.

• Question 64: Which layout involves an asphalt concrete floor? 1-1, 2-δ, 3-8, 4-, 5-g, 6-3.

• Question 65: Which layout involves a xilolithe floor? 1-1, 2- δ, 3-8, 4- , 5- g, 6-3.

• Question 66: Which layout involves a beam floor? 1-1, 2−ò, 3−8, 4- , 5− g, 6− 3.

• Question 67: Which layout involves a brick floor? 1-1, 2- δ, 3-8, 4- , 5- g, 6-3.

• Question 68: Which of the given layouts is a rectangular light-air duct? 1-1, 2- δ, 3-8, 4-ต.

• Question 69: Which is a triangular light-air shaft layout? 1-1, 2-, 3-8, 4-ต.

• Question 70: Which is a mixed light-air shaft layout? 1-1, 2-, 3-8, 4-ต.

• Question 71: Which layout features only zenith light openings? 1-1, 2- δ, 3-8, 4-ต.

• Question 72: What material should not be used for industrial building window frames? Glass, reinforced concrete, wood, metal.