120 Questions
What is one key consideration for safe load transfer as mentioned in the text?
Answer hidden
Why is it important to consult with associated personnel like the dogger during load transfer?
Answer hidden
What should be done before lifting and moving a load using a crane?
Answer hidden
Which of the following is NOT a part of safe load transfer techniques mentioned in the text?
Answer hidden
Why is it important to ensure that all required signals are correctly given and interpreted before transferring a load?
Answer hidden
What is the purpose of conducting a test lift before moving a load?
Answer hidden
When should you commence the lift if the test lift indicates the load is stable?
Answer hidden
What should be done if a hazard requiring control is identified during a test lift?
Answer hidden
What should be verified before proceeding with a load movement?
Answer hidden
When should adjustments to slinging be made for a load?
Answer hidden
What should you do if the overload light or indicator comes on while operating a crane?
Answer hidden
If the load swings while moving, what should an operator do to prevent accidents?
Answer hidden
What is the correct procedure to follow to move loads with a crane?
Answer hidden
What should be done if a crane collides with another operating crane?
Answer hidden
What action should be taken if a fault or malfunction is noticed in crane operation?
Answer hidden
What can associated personnel use to steady the load during a move or when landing the load?
Answer hidden
What should you do with sharp corners when connecting loads?
Answer hidden
Why might a tagline be used when operating a crane?
Answer hidden
Where should the lifting ring be located on the forks when using a pallet lifter attachment?
Answer hidden
What should be done if a load is too heavy to control by hand?
Answer hidden
What is the recommended method to bring a load to a halt over the landing spot?
Answer hidden
What should you ensure before commencing a lift with a pallet lifter attachment?
Answer hidden
What should you not do when attaching a load to a crane hook?
Answer hidden
Why is 'plugging' the controls to stop the load not recommended?
Answer hidden
Why is it important to check for oil leaks before lifting a load?
Answer hidden
What is a common communication method used for directing load movement?
Answer hidden
Why is it important not to raise the load more than necessary?
Answer hidden
What should you do if you are unsure of the directions given to you during a lift operation?
Answer hidden
What does the term 'load swing' refer to in the context of crane operations?
Answer hidden
When using dual hoists to lift a load, what qualification is required?
Answer hidden
Which of the following should be checked to ensure clear passageways?
Answer hidden
What are considered restraints for loads on vehicles according to the text?
Answer hidden
Who is generally responsible for restraining loads on vehicles?
Answer hidden
What must be done before leaving an unattended crane?
Answer hidden
How should loads be restrained to prevent movement during transport?
Answer hidden
What is required when placing loads onto vehicles for weight distribution according to the text?
Answer hidden
What should be used to ensure load stability during transport?
Answer hidden
How should the crane be shut down according to the text?
Answer hidden
What should be done if you temporarily leave the crane unattended?
Answer hidden
Which personnel are important to consult during load transfer according to the text?
Answer hidden
What should be listed in an 'Environmental Management Plan' for a worksite?
Answer hidden
Which of the following should be reported if identified at a worksite?
Answer hidden
What is the best way to control hazards in the workplace?
Answer hidden
What is a key requirement for managing environmental issues during work according to the text?
Answer hidden
What should a worker do if they identify a hazard they cannot eliminate?
Answer hidden
Which environmental detail may need to be listed in an 'Environmental Management Plan' according to the text?
Answer hidden
Which of the following is NOT mentioned as a consideration when checking for hazards in the work area?
Answer hidden
When identifying a hazard or environmental issue, what is one additional step that may need to be taken according to the text?
Answer hidden
How should a worker proceed through the Hierarchy of Hazard Control if they cannot eliminate a hazard?
Answer hidden
What is the primary purpose of considering legislation, codes of practice, and industry standards when controlling hazards?
Answer hidden
What is the purpose of Personal Protective Equipment (PPE) mentioned in the text?
Answer hidden
What should you do if you are unsure about the safety of carrying out your work?
Answer hidden
When should you check if Personal Protective Equipment (PPE) is working well?
Answer hidden
What should you do if you think a hazard is too dangerous to work with?
Answer hidden
Why is it important to have hazard controls in place before starting work?
Answer hidden
What is the correct procedure to follow when a fault is noticed during crane operation?
Answer hidden
Why is it necessary to report defects and damage found during inspections?
Answer hidden
What should you do before moving a load with a crane to ensure safety?
Answer hidden
Why is it important not to use faulty equipment until it has been fixed?
Answer hidden
What action should be taken if a fault is discovered during routine checks?
Answer hidden
What kind of records, reports, and paperwork may be needed in addition to maintenance records for cranes?
Answer hidden
What is the importance of keeping detailed records of any problems encountered during a shift?
Answer hidden
In the context of crane operations, what is the purpose of Take-5 forms?
Answer hidden
Which of the following types of logs are NOT mentioned in the text as required records?
Answer hidden
What should be done with any faults noticed during crane operations?
Answer hidden
What is one of the details that needs to be included in a fault report form?
Answer hidden
What action should be taken with the crane until repairs are completed after a fault is identified?
Answer hidden
Why is it essential to only carry out servicing tasks approved for completion?
Answer hidden
What should be used to ensure people's safety during maintenance activities?
Answer hidden
Why is it important for some sites to verbally report faults to a supervisor?
Answer hidden
What is a key aspect to consider to ensure a safe load transfer?
Answer hidden
What should be done before leaving an unattended crane?
Answer hidden
Why is it important to ensure that all required signals are correctly given and interpreted before transferring a load?
Answer hidden
What should a worker do if they identify a hazard they cannot eliminate?
Answer hidden
What action is recommended if a hazard requiring control is identified during a test lift?
Answer hidden
What is an important reason for not raising the load more than necessary?
Answer hidden
When should adjustments to slinging be made for a load?
Answer hidden
What is one key requirement for managing environmental issues during work according to the text?
Answer hidden
'What is a common communication method used for directing load movement?' does not include:
Answer hidden
Why is 'plugging' the controls to stop the load not recommended?
Answer hidden
What are the key components that need to be included in a fault report form when reporting a fault found during crane operations?
Answer hidden
Why is it important to keep a crane tagged out (isolated from use) until repairs have been made after a fault has been identified?
Answer hidden
What are the routine maintenance tasks that may be required for cranes to maintain their operating capacity?
Answer hidden
Why is it important to only carry out servicing tasks that you are approved to complete?
Answer hidden
What safety measures should be taken during maintenance activities to ensure the safety of people in the area?
Answer hidden
What are the key components of the training materials for operating a gantry or overhead crane?
Answer hidden
What qualification is needed to operate a gantry or overhead crane with 3 or fewer powered operations?
Answer hidden
Why is it important to carry out routine maintenance on a gantry or overhead crane?
Answer hidden
What is one key aspect of preparing for lifting operations with a crane?
Answer hidden
What are some appropriate hazard controls to put in place before beginning maintenance on a crane?
Answer hidden
What task qualifies you to operate a gantry or overhead crane according to the training materials?
Answer hidden
What should be done before leaving an unattended crane?
Answer hidden
How should you ensure load stability during transport?
Answer hidden
What should you do if you are not trained to change or repair a certain part of the crane?
Answer hidden
What is one common component that may require lubrication tasks?
Answer hidden
Why is it important to consult with associated personnel like the dogger during load transfer?
Answer hidden
What should you consult to determine the best methods of disposal for environmentally sensitive fluids or materials?
Answer hidden
What should you check with if you are unsure of any disposal requirements on site?
Answer hidden
What should you ensure before commencing a lift with a pallet lifter attachment?
Answer hidden
What is an important aspect of record-keeping to ensure smooth site operations?
Answer hidden
What should you do if you notice any lifting gear that appears to be damaged or in poor condition?
Answer hidden
When should routine checks be conducted on equipment?
Answer hidden
What should you do before starting work with a crane?
Answer hidden
What should be checked before any crane operations are carried out?
Answer hidden
What should be done before using a crane to lift and move a load?
Answer hidden
What should you do before operating the overhead crane after maintenance work has been performed?
Answer hidden
Why should you never wear loose clothing or jewelry when operating the crane?
Answer hidden
What should you do when lifting a load with the crane?
Answer hidden
What should you do if you encounter slip and trip hazards while operating the crane?
Answer hidden
What is the recommended procedure when approaching another person while operating the crane?
Answer hidden
What should you do if you find any faults during routine checks of a crane?
Answer hidden
What is the correct procedure to restart a crane after an emergency stop?
Answer hidden
What should you do before moving a load with a crane to ensure safety?
Answer hidden
What are the steps to be taken if a hazard requiring control is identified during a test lift?
Answer hidden
What should be done if a crane collides with another operating crane?
Answer hidden
Why is it important not to use faulty equipment until it has been fixed?
Answer hidden
What is the importance of keeping detailed records of any problems encountered during a shift?
Answer hidden
What should be done with sharp corners when connecting loads?
Answer hidden
When should adjustments to slinging be made for a load?
Answer hidden
What qualification is needed to operate a gantry or overhead crane with 3 or fewer powered operations?
Answer hidden
Study Notes
- To operate a remote bridge or gantry crane, the person must be competent and qualified.
- Use appropriate load shifting techniques, adhere to standards and workplace procedures.
- Consider specific terrain, weather conditions, and time of day for load transfer.
- Consult with associated personnel like doggers regarding taglines or other methods to prevent load swing or twisting.
- Operate in accordance with Australian Standards and have all planned hazard controls in place.
- Avoid damaging the product or crane during handling and use sound warning devices before moving a load.
- Check the area for hazards, free of obstructions, and clear of other people before lifting a load.
- Conduct a test lift to determine load stability and safety before moving it.
- Lower the load over the landing spot and never stop it suddenly or by 'plugging' the controls.
- Position the load carefully and gradually to prevent damage or injury.
- Use a tagline if required, with a non-conductive rope, to control loads or if there's light wind causing swing.
- Lower and place the load carefully over the landing spot, and never stop it by plugging the controls.
- Conduct a test lift to ensure the load is safe and stable, and verify load calculations if load measuring devices are fitted.
- Use hand signals, whistle signals, two-way radios, or verbal directions to communicate during load movement.
- Maintain clearance for fire equipment and emergency exits while steadying a load during movement.
- Restrain loads on vehicles appropriately after landing to prevent movement during transport using chains, webbing straps, or rope.
- Follow manufacturer's instructions and safe operating procedures for shutting down the crane.
- Perform a partial shutdown if leaving the crane temporarily.
Test your knowledge on the safety protocol for lifting gear operations. Questions cover proper attachment, lifting height, load stability, hazard monitoring, and load positioning.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
