Podcast Beta
Questions and Answers
The feed rate in the operation is 0.30 mm/rev.
True
The cutting speed for the drilling operation is 25 ft/min.
False
The total metal removal rate during the operation exceeds 1.50 in3/min.
False
The two spindles in the drill have different feed rates for drilling the holes.
Signup and view all the answers
The cutting time to complete the drilling operation is not provided in the text.
Signup and view all the answers
The machining time required to drill a through hole can be determined using the formula Tm = t/fr.
Signup and view all the answers
In a drilling operation, metal removal rate increases with a higher feed rate.
Signup and view all the answers
The rate of metal removal in drilling is determined by the product of drill cross-sectional area and cutting speed.
Signup and view all the answers
In a drilling operation, the approach allowance accounts for the drill point angle.
Signup and view all the answers
In a drilling operation, feed rate is determined by fr = Nf.
Signup and view all the answers
Hole depth in a blind hole is defined as the distance from the work surface to the depth of the full diameter.
Signup and view all the answers
In drilling, the cutting tool is called a broach.
Signup and view all the answers
Reaming is an operation related to turning.
Signup and view all the answers
A blind hole is a hole that exits on the opposite side of the work material.
Signup and view all the answers
The area of the frustrum of a cone can be calculated using the formula A = π(R1 + R2){h^2 + (R1 - R2)^2}^0.5.
Signup and view all the answers
The volume cut in turning is calculated by multiplying the area A by the depth of cut d.
Signup and view all the answers
A radial drill press is typically used for small parts due to its compact size.
Signup and view all the answers
The rotational speed of the drill can be represented by the symbol V.
Signup and view all the answers
A drill jig is a work holding device designed specifically for a particular work part.
Signup and view all the answers
The feed in drilling is specified in mm/rev.
Signup and view all the answers
The uncut chip thickness taken by each cutting edge is double the feed.
Signup and view all the answers
A vise is a work holder with one jaw.
Signup and view all the answers
A drill fixture is the same as a drill jig in terms of function.
Signup and view all the answers
The automatic controls on the lathe allow the surface speed to be maintained at a constant value of 100 m/min.
Signup and view all the answers
The workpiece for turning the tapered surface has a length of 650 mm.
Signup and view all the answers
The minimum diameter of the workpiece for turning the tapered surface is 100 mm.
Signup and view all the answers
The depth of cut for turning the taper is 2.0 mm.
Signup and view all the answers
The feed rate for turning the taper is 0.50 mm/rev.
Signup and view all the answers
