10 Questions
Which one of the following is NOT a requirement for open site radiography?
Maintaining close communication between operators
What is the maximum allowable dose rate at the boundary during exposure?
25 μSv·h-1
When should the dose rates at the boundary be measured?
During exposure
What should be done if the dose rates at the boundary are found to exceed the maximum allowable limit?
Rectify the dose rates
What should be ensured when directing the primary beam towards the ground or floor?
No person below the ground or floor level is in the path of the beam
Which one of the following is a requirement for the operator prior to commencing industrial radiography work?
Ensuring all persons not involved in the operation are at safe locations
What is a requirement for the operator during industrial radiography work?
Having a suitable radiation survey meter available for immediate use
Which one of the following is a requirement for the operator's personal radiation monitoring device?
It should record the operator's cumulative radiation dose
What is a requirement for the operator's personal dosimeter?
It should provide an audible indication of changing dose rate
Which one of the following is a requirement for the operator's compliance during industrial radiography work?
Ensuring all interlocks are properly positioned
Test your knowledge on the additional requirements for open site radiography in industrial settings. Explore the importance of establishing clear boundaries and using warning signs and devices for safety.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free