IMCA Safety Flash Overview

Incident Summary

• IMCA Safety Flashes highlight key safety issues to prevent repeat incidents within the maritime community.
• Members are encouraged to share incident information anonymously by adding [email protected] to their distribution lists.

Dropped Lifting Beam

• A 4-ton lifting beam fell 50 cm during operations when a 1-ton soft strop broke.
• No injuries occurred as deck crew maintained a safe distance during the lift.
• The incident was caused by unverified beam weight and a sharp edge on the pad eye that compromised the strop's integrity.
• A related incident was reported just 10 days prior, emphasizing ongoing safety training and awareness.

Vessel Collision Incident

• Vessel, using "joystick auto heading mode," moved towards a platform during DP operations for four hours.
• The vessel collided with the platform but sustained only minor damage; no injuries were reported.
• Safety protocols were effective; management systems emphasized watchkeeping duties, and crew were compliant with rest hours.

Lessons Learned from Pipeline Operations

• Managing flooding operations involves dynamic assessment of risks.
• Inspect and evaluate "as found" conditions for hazards before initiating work.
• Consider multiple variables in umbilical management to enhance safety.

Stored Energy Incident

• During a disconnection task, a hydraulic jack was improperly used to eject a stuck 10 kg pin, causing injury to a worker when it was released under load.
• The worker entered the line of fire to gain visibility, leading to a laceration from the pin striking safety glasses.
• Incident highlights risks of using hydraulic tools without adequate consideration of safety protocols.

Leg Injury During Mooring Operations

• A crew member was injured while unmooring when a bight formed around their leg due to a long messenger line snagging.
• The winch operator lacked visibility, exacerbating the risk of the incident.
• Safety lessons emphasize maintaining distance from moving machinery and ensuring clear lines of sight during remote operations.

General Safety Recommendations

• Always verify lifting equipment weight capacity before use.
• Ensure safety equipment is free from sharp edges and sufficient strength.
• Keep clear communication between equipment operators and personnel on the deck.
• Avoid getting close to rotating machinery and maintain awareness of surroundings.

Explore key safety matters and incidents highlighted in the IMCA Safety Flashes. This quiz aims to facilitate learning from past incidents to enhance overall safety. Engage with this important information to better understand collective safety efforts.