Illinois Non CDL Class C Flashcards & Quiz

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Name the lighting equipment required for second division or combination vehicles longer than 25 feet and/or wider than 80 inches.

Two yellow/amber lights on the front of the vehicle; one light must be on each upper front corner and visible 500 ft, three red lights on the rear of the vehicle in a horizontal line and visible for 500 ft, two yellow/amber reflectors on the front of the vehicle; one reflector must be on each lower corner, and two red reflectors on the rear of the vehicle; one reflector must be no more than 12 inches from each lower corner.

What is the maximum width for most vehicles?

8 ft

What is the proper method of braking on long downhill grades?

Apply the brakes just hard enough to feel a definite slowdown. When your speed has been reduced to approximately 5 mph below your safe speed, release the brakes. This brake application should last about three seconds.

What are the laws that apply to one vehicle towing another?

The drawbar or other connections must be strong enough to pull all the weight of the vehicle being towed. The connection may not exceed 15 ft. Each towed vehicle must be coupled with two safety chains or cables. Signup and view all the answers

What are the maximum weights for single, tandem and 5-axle combinations?

20,000 pounds on a single axle; 34,000 pounds on a tandem; and up to 80,000 on a 5-axle combination. Signup and view all the answers

What is the maximum length allowed for second division vehicles, empty or loaded?

Shall not exceed 42 ft; exceptions include vehicles hauling pipes, poles, or other structural objects. Signup and view all the answers

At what distance must warning flags, flares, or other approved warning devices be visible?

500 ft in the dark Signup and view all the answers

What are the requirements for reducing overweight on vehicles?

Driver must stop the vehicle in a suitable place and the truck must remain standing until a part of the load is removed or shifted. Signup and view all the answers

What type of vehicles are required to stop at railroad crossings?

Second division vehicles carrying passengers for hire or any bus that meets all special requirements. Signup and view all the answers

What is the maximum height, including load, for all vehicles?

13 ft 6 in Signup and view all the answers

How do you mark a load that projects 4 ft or more to the rear of the vehicle?

Must display a red light to the rear of the load that must be seen for at least 500 ft when it's dark. Signup and view all the answers

On a two-lane roadway, what is the maximum legal speed limit for trucks with a gross weight of 8,000 pounds or more?

70 mph Signup and view all the answers

Study Notes

Lighting Equipment Requirements

Second division or combination vehicles over 25 feet or wider than 80 inches must have two yellow/amber lights on the front, visible at 500 ft.
Three red lights must be horizontally aligned on the rear, also visible from 500 ft.
Front must feature two yellow/amber reflectors at the lower corners, while the rear requires two red reflectors positioned within 12 inches from each lower corner.

Vehicle Dimensional Standards

The maximum allowable width for most vehicles is 8 feet.

Braking Techniques on Grades

Brake gently to initiate a clear slowdown.
Once speed drops approximately 5 mph below a comfortable level, release brakes after about three seconds.
Repeat this method to maintain a safe speed downhill.

Towing Regulations

Drawbar connections must support the entire weight of the towed vehicle.
Maximum distance between vehicles cannot exceed 15 feet, with some exceptions for specific bulky items.
Drawbars are mandatory on controlled access highways or designated roadways.
Two safety chains or cables are required to prevent separation during towing.
Passengers are generally prohibited from riding in towed vehicles, with exceptions for low-speed situations (15 mph) or if the passenger is over 18.

Weight Limits

Maximum weight limits are set at 20,000 pounds for a single axle, 34,000 pounds for tandem axles, and up to 80,000 pounds for 5-axle combinations, depending on axle spacing.

Length Restrictions

The maximum length for second division vehicles must not exceed 42 feet, unless transporting items like pipes or machinery that cannot be easily disassembled.

Visibility of Warning Devices

Warning flags, flares, or approved devices must be visible for at least 500 ft in low-light conditions.

Overweight Reduction Procedures

Drivers must stop in a suitable location to address overweight violations.
The truck must remain stationary until part of the load is offloaded or redistributed.
Responsibility for unloaded materials lies with the vehicle owner or operator.

Railroad Crossing Regulations

Second division vehicles and buses meeting specific requirements must stop at railroad crossings.

Vehicle Height Limit

The maximum height for all vehicles, including loads, is 13 feet 6 inches.

Load Projection Marking

Loads extending 4 feet or more beyond the rear of a vehicle must display a red light, visible from at least 500 ft during night conditions.

Speed Limit for Heavier Trucks

On two-lane roadways, trucks with a gross weight of 8,000 pounds or more have a maximum legal speed limit of 70 mph.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Test your knowledge on the lighting equipment requirements for second division or combination vehicles in Illinois. This flashcard quiz covers essential regulations for vehicles longer than 25 feet and/or wider than 80 inches. Perfect for preparing for driving tests or refreshing your understanding of vehicle safety standards.