Hyundai Machine Safety Guidelines

What is one of the circumstances in which Hyundai strictly prohibits the use or operation of the machine?

Operating on a flat surface
Driving on a highway
Lifting a heavy load
Lifting a worker up (correct)

What is the main cause of safety accidents related to the operation, maintenance, and repair of the machine?

Lack of experience
Failure to comply with safety instructions (correct)
Improper training of the operator
Poor machine design

What should the operator do before operating, refueling, inspecting, or repairing the machine?

Call a professional for assistance
Check the machine's manual
Read and understand the product information (correct)
Attend a training course

What may happen if you attempt to modify the machine without the company's consent?

The machine's ability to function may be affected (B) Signup and view all the answers

What is the consequence of not complying with the warnings about potential risks?

Serious injury or death (D) Signup and view all the answers

What is the purpose of this manual?

To provide preventive measures and warnings (B) Signup and view all the answers

What is the purpose of the rear window?

To serve as an alternate exit (B) Signup and view all the answers

What is the importance of inspecting and cleaning the air conditioner filter?

To prolong the air conditioner's life and maintain good performance (D) Signup and view all the answers

What should you do before getting off the machine?

Place the safety knob in the LOCKED position (D) Signup and view all the answers

What is the warning about the grease plug?

It can penetrate the body and cause serious injury or death (C) Signup and view all the answers

What is the consequence of operating the machine with the quick clamp switch unlocked?

The bucket will fall off (D) Signup and view all the answers

Where is the label for the safety knob positioned?

On the cover of the safety knob, on the left side of the operator's console (C) Signup and view all the answers

What is necessary to release the gas from the accumulator?

A special air bleed valve (C) Signup and view all the answers

Where is the MACHINE CONTROL PATTERN CHANGE label positioned?

On the right window of the cab (D) Signup and view all the answers

What should you do before starting the machine?

Check the machine control pattern change valve (D) Signup and view all the answers

What is the consequence of not changing the label to match the pattern?

Serious injury or death (C) Signup and view all the answers

Where is the SWING BEARING GREASE label positioned?

On the front side of the swing bearing housing (C) Signup and view all the answers

What is the purpose of the air bleed valve?

To release gas from the accumulator (D) Signup and view all the answers

What should you do after the preheating pilot lamp turns off?

Wait for five minutes to warm up the engine (B) Signup and view all the answers

What happens if the engine does not start?

Allow the starter to cool for about 2 minutes (A) Signup and view all the answers

What should you not do during the warming up process?

Operate the working devices or change the operation mode (C) Signup and view all the answers

What should you check after the engine starts?

The oil level gauge, warning lamps, and temperature gauges (A) Signup and view all the answers

What is the purpose of the seat belt reminder warning lamp?

To remind the operator to fasten the seat belt (C) Signup and view all the answers

What can happen if you increase engine speed quickly after starting?

It can damage the engine or turbocharger (C) Signup and view all the answers

What is the default setting for each memory mode?

Mid-range of max engine speed, power shift, and auto idle speed (D) Signup and view all the answers

What can be adjusted and memorized in the U-mode?

High idle rpm, auto idle rpm, and EPPR pressure (C) Signup and view all the answers

What is the purpose of the monitoring system?

To monitor machine performance (B) Signup and view all the answers

What is displayed on the LCD in the self-diagnostic system?

Fault codes detected by the MCU and ECM (A) Signup and view all the answers

What is the purpose of the auto idle mode?

To activate the auto idle function (C) Signup and view all the answers

What is the 'One touch decel & low idle' setting?

1000 rpm (C) Signup and view all the answers