Hot Work Outlines and Requirements in Tasnee

What is required before entering a Confined Space under Category A?

What should be done with open manways or covers not in use in a Confined Space?

What is a requirement for safe access and exit in a Confined Space?

What happens if condition changes during a Confined Space Entry Permit?

Who should approve the Rescue plan for Confined Space Entry under Category A?

What should not be used to barricade manways or covers in a Confined Space?

Why should personnel not be lowered into Confined Spaces without facilities to climb back out?

What equipment should be included in the JSA if lifting material/person using a cage within a Confined Space?

What is the purpose of venting in industrial operations?

How is ventilation achieved in an industrial setting?

What characterizes an oxygen-deficient atmosphere?

What does the Lower Explosive Limit (LEL) refer to?

Who is a Gas Tester as defined in the text?

What is the Threshold Limit Value (TLV) related to?

How is an Upper Explosive Limit (UEL) characterized?

What distinguishes a Breathing Apparatus as described in the text?

When should a fresh gas test be carried out according to the text?

What should be done before restarting hot work after an interruption of more than one hour?

What is required to work in an atmosphere containing toxic gas or vapor according to the text?

What type of activities are considered 'hot work'?

Who is responsible for maintenance and calibration of portable gas detector instruments?

What is a requirement for running/operating equipment at a site?

What should be done if there are fault indications noted by the operator using the gas detector?

Which method is NOT an acceptable way to achieve positive isolation for hot work?

Where can the Threshold Limit Value (TLV) for each substance be found according to the text?

What should be ensured before starting hot work on an asset?

Under what conditions should gas testing be conducted or repeated?

What is a prohibited activity for hot work?

When should a hot work permit be obtained at a site?

What is considered a hazard or high risk in the context of hot work?

'JSA' mentioned in the text refers to what?

What is a recommended method to minimize hazards when de-energization of underground utilities is not possible?

In what scenario is a plan required for excavations?

What action should be taken if the excavation will obstruct a roadway or access?

Why should forklifts never be used to lift a person according to the text?

What is the purpose of using barricades around the work area according to the text?

Which precaution should be taken regarding lifting operations from the given text?

What is a crucial step to be completed before a work permit is issued, according to the text?

In what way should tags be displayed on equipment to be worked on?

Why is it prohibited to display a general tag on equipment for work to be performed?

What is necessary regarding tagging equipment for safe working conditions?

Why is it important to isolate energy sources before issuing a work permit?

What should be completed by the issuer before issuing a work permit?

What type of equipment is NOT allowed to ventilate confined spaces according to the text?

What is the alternative ventilation equipment that should be kept ready in case of Air Conditioners shutdown according to the text?

What should be established and operated continuously during work in a confined space to ensure proper ventilation?

What is the document under which a ventilation plan should be prepared and approved according to the text?

Which factor will determine the required ventilation rate when using Air Conditioners for ventilation in a confined space?

What should be ensured about fans and air movers when using them to ventilate confined spaces according to the text?

What are the three aspects mentioned in the text that should be considered for effective ventilation?

What must be established and operational throughout work in a confined space to maintain proper ventilation according to the text?

What is the maximum allowable frequency between gas tests?

What should workers do when a gas detector alarm sounds?

What is a mandatory requirement for open flame or spark conditions?

What should be equipped on portable or continuous monitoring devices for warning purposes?

What must happen for the alarms of the gas testing device to stop according to the text?

What is required to be recorded in the Work Permit by the authorized gas tester?

When should functional tests be carried out for the Gas detector device according to the text?

What should workers ensure about good air near openings in enclosed locations?

Why is a Manway of 24 inches or less in the smallest dimension considered restricted?

What is one challenge rescuers may face when the Manway is located vertically in a confined space?

What is the significance of having a developed Rescue plan for confined space entry during the job planning phase?

What method should be used to identify underground cables or utilities if de-energization is not possible or location is unknown?

Why is it essential to know whether a confined space has a horizontal or vertical Manway access?

When should the Security and Fire Sections be notified according to the text?

What is a key reason for using tools or equipment that reduce the possibility of damage to underground services?

What is one drawback of a confined space with an elevated entrance located more than 4 feet above ground?

Why should forklifts never be used to lift a person as per the text?

Why are manways of greater than 24 inches in the smallest dimension preferred?

Why might a confined space with a horizontal Manway access present challenges during retrieval operations?

In what scenario should a plan be provided by the requester and approved by the Safe Making Department?

Why is it crucial to have a Rescue plan developed before issuing a confined entry Permit?

What is the primary purpose of putting up barricades around a work area according to the text?

Why should nobody be allowed to walk or reach under a raised load based on the text?

What is an essential step to minimize hazards during excavation when de-energization of underground utilities is not feasible?

Hot Tapping involves connecting equipment or piping by welding or drilling while the equipment is not in service.

A Safe Maker is a person who is designated on the permit by the Permit Issuer for safe making, and they do not need to be trained or certified.

Excavation Work can only be done using manual tools according to the text.

A Breathing Apparatus is not mentioned as a requirement in the text for specific tasks.

Cold Work involves working on live electrical circuits.

The Threshold Limit Value (TLV) is directly related to the Lower Explosive Limit (LEL) in the text.

First line break refers to the final closing of piping or process equipment according to the text.

Hot Work includes any work that does not create enough heat or sparks to ignite flammable materials.

Process Isolation is a method used to prevent a liquid or gas process stream from being conveyed past a confined space.

A confined space is characterized by having natural ventilation and being intended for continuous employee occupancy.

The action of entering a confined space is considered completed only when the person's entire body is inside the space.

An excavation more than 1.2 meters in depth is not classified as a confined space.

Confined spaces are categorized into category A only.

Continuous employee occupancy is intended for all types of confined spaces.

A confined space entry occurs when any part of a person's body crosses the outside limits of the confined space.

Manholes, pits, and ducts are not examples of confined spaces.

Before issuing a work permit, all process and non-process equipment must be made safe.

In the text, it is allowed to display a general tag on equipment for work to be performed.

As per the text, tags must be placed in an inconspicuous position on the equipment being worked on.

In the provided text, all required information such as equipment number, name, date, and signature of a safe maker must be written on the tag attached to the equipment.

It is acceptable to use any means suitable for the application to attach tags to equipment for work.

Isolating energy sources is not listed as a step to be completed before issuing a work permit in the text provided.

As per the text, putting up barricades around a work area before issuing a work permit is optional.

The text states that before issuing a work permit, it is essential to prepare the equipment itself for safe working on it.

Breathing Apparatus can include canisters, cartridge, and filter masks according to the text.

The Upper Explosive Limit (UEL) refers to the minimum concentration of a flammable gas in air below which propagation of flame will not occur.

Oxygen Deficient Atmosphere is defined as an atmosphere containing less than 21% oxygen at sea level.

A Gas Tester must be trained in using gas detecting equipment and authorized to conduct gas tests according to the text.

Threshold Limit Value (TLV) is the toxic gas concentration above which it is not safe to work for extended periods according to the text.

Venting involves releasing gases or vapors to the atmosphere during depressurization or purging activities.

Ventilation in an industrial setting can be achieved by using self-contained breathing apparatus (SCBA).

The Lower Explosion Limit (LEL) is expressed as a volume percentage of vapor in air according to the text.

Gas detectors are only accurate in atmospheres containing oxygen between 10% and 20.8%.

Gas testing is not required for confined space entry according to the text.

You can enter a hazardous atmosphere even if it has not been tested according to the text.

Gas testing is conducted to determine the required personal protective equipment.

A fresh gas test should be carried out every hour according to the text.

Gas detectors should be used in atmospheres containing oxygen above 20.8% for accurate readings.

Gas testing is a requirement for working in live electrical circuits according to the text.

Gas detectors should not be used in atmospheres with oxygen below 10% for accurate readings.

If hazard can be mitigated, then Rescue shall be prepared prior to entry.

A baffle or mixing blade in a confined space would not be considered an obstruction for rescue purposes.

Elevated confined spaces usually require low angle rescue procedures.

Conducting a fresh gas test before issuing a work permit is not necessary according to the text.

Continuous employee occupancy is required for all types of confined spaces.

Hot work permits should not be obtained at a site for safety reasons.

Gas detectors should not be used in atmospheres with oxygen above 20.8% for accurate readings.

Process Isolation is a method used to allow a liquid or gas process stream to flow past a confined space.

A work permit is required for routine Maintenance activities performed by experienced employees inside the permanent Warehouses.

Forklifts driven by operators within Hazardous Areas do not require a work permit if designed for safe use in such locations.

Any operation work performed by unqualified contractors working under operation within their normal operating responsibilities does not require a work permit.

Visual inspections in operational areas require completion of the visitor's logbook according to the text.

Maintenance work inside Maintenance Workshops does not need a work permit according to the text.

It is required to notify the Security and Fire Sections when a work permit is not necessary for certain operations.

A confined entry permit must always be issued before any work can be conducted in internal combustion engine equipment operation areas.

Work permits are needed for energizing or de-energizing equipment but not for resetting tripped equipment.

In order to issue a work permit, it is not necessary to positively identify the equipment to be worked on.

All hot work activities inside the process/production areas require a Job Safety Analysis (JSA).

It is allowed to display a general tag on equipment for work to be performed.

Gas detectors should not be used in atmospheres with oxygen above 20.8% for accurate readings.

A rescue plan must be developed before issuing a confined entry permit under Category A.

The text specifies that tags can only be attached to equipment using specific adhesive methods.

Before starting work on equipment, it is essential to ensure that the process has been isolated from the general equipment.

All activities executed by ARC contractors do not require a Job Safety Analysis (JSA).

Threshold Limit Value (TLV) refers to the safe concentration of toxic gas above which it is not recommended to work for extended periods.

Continuous employee occupancy is intended for all types of confined spaces.

Gas testing is not required for confined space entry according to the text.

The text states that it is acceptable to use any means suitable for the application to attach tags to equipment for work.

Cold Work involves working on live electrical circuits according to the text.

Venting involves releasing gases or vapors to the atmosphere during purging activities.

Breathing apparatus can include canisters, cartridges, and filter masks according to the text.

Excavation Work can only be done using manual tools according to the text.

It is allowed to use TASNEE fire extinguishers for hot work by contractors.

During welding in confined spaces, gas-burning torches can be left unattended inside the space.

Compressed gas cylinders and welding machines are allowed inside confined spaces during welding.

Welding machines do not need to be grounded when welding in confined spaces.

If the removal of welding torches from a confined space is impractical, the hose at the regulator should be disconnected.

Gas cylinders must be kept inside the operating area at the end of any work period during arc welding.

Arc welding leads and oxy-acetylene hoses do not need to be inspected before use in confined spaces.

The electrode can be left in the electrode holder when arc welding is stopped for any reason.