Hot Water Boiler Operation Quiz
20 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the acceptable color for a light fuel oil flame?

  • Bright orange with yellow at the tips of the flame
  • Bright yellow with orange at the tips of the flame (correct)
  • Blue with orange at the tips of the flame
  • Predominantly blue

What could cause a smoky flame in an oil firing system?

  • Low fuel temperature
  • Incorrect fuel-air ratio
  • Dirty burner nozzle
  • All of the above (correct)

What may be indicated by a gradual increase in stack temperature?

  • Heat transfer efficiency is decreasing (correct)
  • No specific indication
  • Fireside or waterside cleaning is required
  • Heating surfaces are clean

What should be done if there is an excessive temperature rise in the flue gases?

<p>Flue gas analysis and excess air adjustment (C)</p> Signup and view all the answers

What is over-firing in the context of boilers?

<p>More heat production than the boiler is designed to transfer (D)</p> Signup and view all the answers

Why should the hot water set point not be below 75°C in non-condensing boilers?

<p>To prevent flue gas condensation (A)</p> Signup and view all the answers

What is the reason for regular checks of hot water heating boilers?

<p>To guarantee safe and efficient boiler function during unsupervised periods (C)</p> Signup and view all the answers

What are some routine checks for hot water heating boilers?

<p>Monitoring the water pressure and flame condition (D)</p> Signup and view all the answers

What does it mean for a hot water boiler to be fully automatic?

<p>It starts, maintains hot water at set point, and stops without operator intervention (B)</p> Signup and view all the answers

What does the burner programmed combustion control do?

<p>Sequences the operation of the burner and maintains safe and efficient operation (B)</p> Signup and view all the answers

What are some of the daily routine procedures for operators of hot water boilers?

<p>Observing the condition of the burner flame and inspecting water pressure (A)</p> Signup and view all the answers

Why do hot water boilers still need regular attention despite their automatic systems?

<p>To ensure safe and dependable operation (C)</p> Signup and view all the answers

What is the consequence of minor water losses in an upfeed heating system?

<p>The operation of the boiler is not affected, but the upper floors of the building will be cold. (C)</p> Signup and view all the answers

What may be a worthwhile investment for a heating system equipped with an automatic make-up valve?

<p>Installing a water meter in the make-up line (C)</p> Signup and view all the answers

What can happen if an expansion tank is full and the piping system cannot accommodate the increase in water volume when the boiler fires?

<p>The safety valve opens and discharges water repeatedly. (B)</p> Signup and view all the answers

How should bladder-style expansion tanks be checked for air charge?

<p>Use a tire pressure gauge to read the tank pressure and adjust as needed. (D)</p> Signup and view all the answers

What can be a common source of air leaks in conventional air cushion expansion tanks?

<p>Old and brittle gauge glass gaskets (B)</p> Signup and view all the answers

What is required for closed hot water heating systems that have had major leaks or equipment repair?

<p>Additional treatment chemical (C)</p> Signup and view all the answers

Under what conditions are hot water heating boilers blown off or blown down?

<p>To drain boilers requiring structural repair or waterside inspection (B)</p> Signup and view all the answers

What is a good practice to reduce the need for internal water treatment?

<p>Restricting blowoff and blowdown (A)</p> Signup and view all the answers
Use Quizgecko on...
Browser
Browser