Tools and Equipment

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson
Download our mobile app to listen on the go
Get App

Questions and Answers

Which instrument is BEST suited for verifying the insulation integrity of motor windings?

  • Volt-Ohm Meter (VOM)
  • Ultrasonic Leak Detector
  • Megohmmeter (correct)
  • Clamp-On Amp Meter

A technician needs to measure the salinity of water. Which instrument should they use?

  • Refractometer (correct)
  • Hygrometer
  • Thermometer
  • Psychrometer

When removing panel screws with an impact driver, which speed setting is generally recommended to prevent damage?

  • Low speed (Setting 1)
  • High speed (Setting 3)
  • Screw mode (correct)
  • Medium speed (Setting 2)

A technician is tasked with drilling into a concrete wall. Which tool is MOST appropriate for this task?

<p>Hammer Drill (D)</p> Signup and view all the answers

A system is operational and has refrigerant, what tool should be used to replace a faulty Schrader core?

<p>Valve Core Removal Tool (VCRT) (D)</p> Signup and view all the answers

Which of the following is the primary function of a psychrometer?

<p>Determining relative humidity (C)</p> Signup and view all the answers

What safety precaution is MOST crucial when using a grinder?

<p>Wearing appropriate Personal Protective Equipment (PPE). (D)</p> Signup and view all the answers

A technician needs to measure the superheat of a system. Which of the following tools would they use?

<p>Thermometer and Psychrometer (C)</p> Signup and view all the answers

When selecting a copper tube cutter, what is the most important factor to consider?

<p>Having the proper size cutter for the specific tubing application. (C)</p> Signup and view all the answers

A technician needs to tighten a black iron pipe. Which tool is MOST appropriate for this task?

<p>Pipe wrench. (D)</p> Signup and view all the answers

What is the PRIMARY function of a swaging tool in HVAC work?

<p>To expand the end of one tube so it can fit over another for brazing. (D)</p> Signup and view all the answers

Why is it important to use a reaming/deburring tool after cutting copper tubing?

<p>To remove any sharp edges or burrs that could restrict flow or damage seals. (D)</p> Signup and view all the answers

Which of the following is NOT a typical application for torque wrenches in HVAC/R systems?

<p>Connecting black iron piping. (C)</p> Signup and view all the answers

When recovering refrigerant from a system, what additional function can some recovery machines perform?

<p>Charging systems with refrigerant. (B)</p> Signup and view all the answers

Why are vacuum pumps crucial during the installation or servicing of HVAC/R systems?

<p>To remove moisture and non-condensable gases from the system. (A)</p> Signup and view all the answers

Which snips would be MOST appropriate for making a curved cut to the RIGHT in a piece of sheet metal?

<p>Right cut (green). (A)</p> Signup and view all the answers

Flashcards

Ultrasonic Leak Detector

Uses a pump to draw in gases to detect leaks.

Psychrometer

Measures wet bulb and dry bulb temperatures to determine relative humidity.

Volt-Ohm Meter (VOM)

Measures volts, ohms, and milliamps.

Clamp-On Amp Meter

Measures current by clamping around a wire.

Signup and view all the flashcards

Megohmmeter (Megger)

Measures high resistance, useful for checking motor winding insulation.

Signup and view all the flashcards

Refractometer

Measures the concentration of substances like sugar, antifreeze, or salt.

Signup and view all the flashcards

Impact Driver

Used for driving screws, or bolts into materials. Best to use 'screw mode' to remove panels.

Signup and view all the flashcards

Valve Core Removal Tool (VCRT)

Removes/replaces Schrader cores on valves, even on live systems.

Signup and view all the flashcards

Screwdrivers

Tools used for tightening or loosening screws. Common types include Phillips, flat, and Torx.

Signup and view all the flashcards

Nut Drivers

Sockets attached to a handle, used to tighten or loosen nuts and bolts. Common sizes range from 1/4" to 9/16".

Signup and view all the flashcards

Adjustable (Crescent) Wrench

A wrench with an adjustable jaw, allowing it to fit various sizes of nuts and bolts.

Signup and view all the flashcards

Torque Wrench

A wrench that applies a specific amount of torque to a fastener, measured in in./lbs. or ft./lbs.

Signup and view all the flashcards

Valve Wrenches

Specialized wrenches for opening or closing refrigeration valves.

Signup and view all the flashcards

Pipe Wrenches

Wrenches with serrated jaws designed for gripping and turning pipes, typically made of steel or aluminum.

Signup and view all the flashcards

Aviation (Tin) Snips

Handheld tools for cutting sheet metal. Different colors indicate different cut directions (straight, left, right).

Signup and view all the flashcards

Copper Tube Cutters

Tool used to cut copper tubing cleanly and efficiently.

Signup and view all the flashcards

Related Documents

More Like This

Use Quizgecko on...
Browser
Browser