Elevator

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson
Download our mobile app to listen on the go
Get App

Questions and Answers

What is the correct procedure for ensuring the doors open in an elevator?

  • Press and hold the 'door close' button until doors are ½ closed (correct)
  • Select a floor two floors below current location
  • Select a floor two floors above current location
  • Press and hold the 'door close' button until doors are closed

What is a key consideration for using elevators during emergency operations?

  • Keeping the elevator car empty
  • Using elevators in Phase III only
  • Selecting any floor above your current location
  • Ensuring there are no more than 2 crews and 2 elevator operators per trip (correct)

When should crews use service elevators during emergency operations?

  • When possible due to larger size and greater weight capacity (correct)
  • When they want to conserve air supply
  • When service elevators have a smaller weight capacity
  • When full PPE is not available

What is a requirement for crews using service elevators during emergency operations?

<p>Being in full PPE with masks on (A)</p> Signup and view all the answers

How many crews are allowed per car/trip when utilizing elevators during emergency operations?

<p>Two crews (D)</p> Signup and view all the answers

What should crews do upon arrival at a floor when using the elevator?

<p>Repeat the door closing procedure before leaving the elevator (C)</p> Signup and view all the answers

Why must crews remain below the weight capacities of the elevator car?

<p>To ensure that the elevator can operate safely (B)</p> Signup and view all the answers

What is one benefit of using a service elevator during emergency operations?

<p>'Door open' button usually accesses all floors (B)</p> Signup and view all the answers

What is the purpose of the outlined procedure for elevator use during high-rise firefighting operations?

<p>To maximize firefighter and civilian safety (C)</p> Signup and view all the answers

Why is it important for Company Officers to secure a set of keys prior to ascending in a high-rise building?

<p>To clear and use elevators (B)</p> Signup and view all the answers

What will happen if elevators are in Phase 1 but the FF key is not inserted?

<p>The elevator will not operate (B)</p> Signup and view all the answers

How can the ability of first-arriving crews to secure and clear elevators impact high-rise incident mitigation?

<p>It significantly impacts successful incident mitigation (B)</p> Signup and view all the answers

What initiates Phase 1 for elevator operation during high-rise firefighting operations?

<p>Inserting the key into the elevator lobby key panel (C)</p> Signup and view all the answers

Without the FF key, what will happen when trying to operate an elevator during high-rise firefighting operations?

<p>The elevator will not operate (A)</p> Signup and view all the answers

What should Company Officers do to maximize firefighter safety during high-rise firefighting operations?

<p>Verify the location of the emergency (B)</p> Signup and view all the answers

Why should crews anticipate that fire conditions will worsen prior to their arrival on the fire floor in a high-rise building?

<p>'Fire conditions worsening' prepares crews for a challenging situation. (C)</p> Signup and view all the answers

What must companies ensure before clearing/using the elevators?

<p>All cars in the elevator bank are open (A)</p> Signup and view all the answers

How can the elevator bank be cleared for extended use?

<p>Obtaining additional keys from Lobby Control (C)</p> Signup and view all the answers

What must be confirmed before using elevators?

<p>No activated smoke detectors in the elevator shaft (D)</p> Signup and view all the answers

When can elevators be used after ensuring they are safe for use?

<p>When the car is determined safe for use (C)</p> Signup and view all the answers

What action is required if smoke, fire, or water is noticed in the hoistway?

<p>Use another bank of elevators or the stairs (C)</p> Signup and view all the answers

After entering the elevator car and putting it in Phase 2, what test should personnel conduct?

<p>Shining a light up into the hoistway (D)</p> Signup and view all the answers

What should crews do if smoke and/or water are present in the elevator hoistway?

<p>Discontinue use of the elevator car and continue ascent using stairs (B)</p> Signup and view all the answers

Why should crews avoid taking an elevator to the top floor of any bank of elevators?

<p>To prevent high smoke accumulation in that area (B)</p> Signup and view all the answers

What should crews do if an elevator fails to stop at the requested floor?

<p>Attempt to stop the car following emergency procedures (B)</p> Signup and view all the answers

What is the recommended action for initial crews holding elevators on upper floors early in an incident?

<p>Return the elevators to the lobby for subsequent arriving crews (A)</p> Signup and view all the answers

Who is responsible for securing remaining elevator banks and reporting this information to the Incident Commander?

<p>Lobby Control Officer (A)</p> Signup and view all the answers

Why should crews stop at least two floors below the reported fire floor?

<p>To prevent high smoke accumulation in elevator areas (B)</p> Signup and view all the answers

What should be done with the elevator car key switch after returning it to the lobby?

<p>Leave it in 'Phase I' and return it to the lobby (D)</p> Signup and view all the answers

'Elevators should not be 'held' by initial crews on upper floors early in the incident.' What is meant by 'holding' elevators?

<p>'Holding' refers to keeping the elevators stationary (C)</p> Signup and view all the answers

What should be done if an elevator fails to stop at the requested floor?

<p>Press the 'Emergency Stop' button if equipped (B)</p> Signup and view all the answers

In case of a high-rise fire, what elevators should be used for fire department operations?

<p>Elevators with a 'Firefighter's Service' (C)</p> Signup and view all the answers

What should be done if an elevator stops in a high heat area?

<p>Attempt to close the doors and resume travel (A)</p> Signup and view all the answers

What action should be taken if an elevator is found to be operating improperly?

<p>Recall it to the lobby and immobilize it if possible (A)</p> Signup and view all the answers

When should an elevator mechanic be requested during a high-rise fire?

<p>When a fire is confirmed at a high-rise (C)</p> Signup and view all the answers

What is the correct protocol if an elevator acts erratically?

<p>Attempt to stop the elevator car and force open the car door (A)</p> Signup and view all the answers

What should be done if an elevator fails to stop at the requested floor and no 'Emergency Stop' button is available?

<p>Attempt to force open the car door (C)</p> Signup and view all the answers

'Mayday' should be considered in what situation related to elevators?

<p>'Mayday' should be considered if an elevator stops in a high heat area (C)</p> Signup and view all the answers

Flashcards are hidden until you start studying

Related Documents

More Like This

Use Quizgecko on...
Browser
Browser