City of Columbus S.O.P
222 Questions
2 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is one of the criteria for generating an alert related to vehicle speed?

  • The vehicle must travel faster than 75 MPH for two consecutive pings.
  • The vehicle must travel at least 60 MPH.
  • The vehicle must exceed the speed limit by 20 or more miles per hour.
  • The vehicle must have exceeded 90 MPH at any time. (correct)
  • Which of the following scenarios would NOT trigger an alert?

  • The vehicle has idled for 3 hours. (correct)
  • The vehicle has a speed of 90 MPH at any point.
  • The vehicle is located outside of Franklin County.
  • The vehicle exceeds the speed limit by 35 MPH for two consecutive pings.
  • How often does the system check the vehicle data to assess alerts?

  • Every five minutes.
  • Every hour.
  • Every two minutes. (correct)
  • Every minute.
  • What condition must be met for the system to consider a vehicle to have exceeded speed limits for two consecutive pings?

    <p>The vehicle must exceed the posted speed limit by 30 or more MPH. (C)</p> Signup and view all the answers

    Which of the following instances can trigger an alert for location?

    <p>The vehicle is located outside of Franklin and its contiguous counties. (C)</p> Signup and view all the answers

    Under what condition is the officer responsible for the driver's actions?

    <p>When the driver is under direct supervision of the officer (C)</p> Signup and view all the answers

    What implication does the officer's responsibility have on the driver's decisions?

    <p>The driver is still accountable for their actions under the officer's supervision (C)</p> Signup and view all the answers

    Which of the following statements accurately reflects the role of the officer?

    <p>The officer monitors the driver’s adherence to traffic regulations (A)</p> Signup and view all the answers

    Under which circumstance is a Fire Division vehicle required to stop completely?

    <p>When directed by a law enforcement officer (B)</p> Signup and view all the answers

    Which scenario does NOT require a Fire Division vehicle to come to a complete stop?

    <p>When the vehicle is in reverse in a parking lot (A)</p> Signup and view all the answers

    What should be done with the vehicle wheels when a FIRE apparatus is stopped and the driver is not in the seat?

    <p>The wheels shall be chocked, front and back (B)</p> Signup and view all the answers

    Which of the following is a requirement for Fire Division vehicles at unguarded railroad crossings?

    <p>To come to a complete stop (D)</p> Signup and view all the answers

    What is the primary responsibility of the backer during the backing process?

    <p>To assist and direct the driver while maintaining visual and voice contact. (D)</p> Signup and view all the answers

    Which of the following statements indicates a violation of safe backing procedures?

    <p>The driver relies solely on the backer's verbal commands without visual contact. (B)</p> Signup and view all the answers

    What must the driver do if the backer is not visible?

    <p>Immediately stop the vehicle to prevent accidents. (A)</p> Signup and view all the answers

    Why is it essential for the backer to have a portable radio during backing operations?

    <p>To maintain voice communication with the driver on the same frequency. (C)</p> Signup and view all the answers

    What should not be relied upon for communication during the backing process?

    <p>Yelling or shouting instructions. (B)</p> Signup and view all the answers

    Who has the authority to call for the RSU’s during an incident?

    <p>An officer, acting officer, or in-charge rescue person (B)</p> Signup and view all the answers

    What is the responsibility of the rescue companies regarding the tools and equipment after use?

    <p>They should return the tools and equipment to the vehicle after use. (C)</p> Signup and view all the answers

    What action must be taken if absorbent is used during an incident?

    <p>The company that called for the vehicle is responsible for replacing the absorbent. (B)</p> Signup and view all the answers

    Which stations are primarily responsible for handling the vehicle during an incident?

    <p>Stations 5 and 19 are the primary personnel responsible. (D)</p> Signup and view all the answers

    How frequently should the RSU’s be checked by the assigned rescue companies?

    <p>Every Wednesday (D)</p> Signup and view all the answers

    What is the primary guideline for members regarding orders from dispatch centers?

    <p>Members must follow all orders from Columbus FAO and other dispatch centers. (D)</p> Signup and view all the answers

    What action is prohibited for members in relation to orders given by the FAO dispatch centers?

    <p>Issuing contrary orders to the Columbus FAO. (C)</p> Signup and view all the answers

    Which of the following best describes the expectation of members towards orders from Columbus FAO?

    <p>Members are expected to follow orders without exception. (C)</p> Signup and view all the answers

    What would constitute a violation of the operational guidelines?

    <p>Disregarding instructions from Columbus FAO. (B)</p> Signup and view all the answers

    Which of the following is true concerning a member's response to received orders from the FAO or any other dispatch center

    <p>Members are required to follow orders from the FAO/dispatch in all circumstances. (A)</p> Signup and view all the answers

    What is the primary purpose of the B# IC talkgroup during an incident?

    <p>To verbally mark company responses and facilitate necessary communications between the Incident Commander and assigned companies. (D)</p> Signup and view all the answers

    Which is a requirement for Chiefs and Safety Officers during a multi-company incident?

    <p>They are required to monitor both B# IC and B# FG talkgroups throughout the incident. (B)</p> Signup and view all the answers

    How should companies mark their status when an MDC is not available?

    <p>They need to verbally mark 'responding' on the B# IC talkgroup. (D)</p> Signup and view all the answers

    What determines the level of communication on the B# IC talkgroup between the Incident Commander and other personnel?

    <p>The discretion of the Incident Commander. (A)</p> Signup and view all the answers

    What is NOT a function of the B# IC talkgroup?

    <p>Coordinating rescue operations led by Safety Officers. (D)</p> Signup and view all the answers

    What is the primary usage of the B# TAC talkgroup?

    <p>For first alarm fire companies assigned to Divisions or Groups. (D)</p> Signup and view all the answers

    Which situation requires the use of the B# FG talkgroup?

    <p>For first arriving Battalion Chiefs to report status. (B), When a firefighter rescue requires communication. (D)</p> Signup and view all the answers

    What is the purpose of the BN# STG talkgroup?

    <p>For coordination among multi-alarm companies in Level II staging. (C)</p> Signup and view all the answers

    Why should the Incident Commander monitor the non-repeated talk groups or DVRS?

    <p>When crews are operating below grade or face communication issues. (A)</p> Signup and view all the answers

    In what scenario is the BN# EMS talkgroup to be utilized?

    <p>When an EMS Group or Branch is established. (A)</p> Signup and view all the answers

    What does the term 'Working Fire' indicate at an incident?

    <p>Multiple resources are needed to control the situation. (C)</p> Signup and view all the answers

    What should be announced when the 360 assessment has been completed?

    <p>'360 Complete' to indicate the assessment's completion. (D)</p> Signup and view all the answers

    Which benchmark indicates that the incident can be effectively managed with the resources present?

    <p>'Situation Contained' indicating stabilization of the incident. (D)</p> Signup and view all the answers

    What does a completed Personnel Accountability Report (PAR) signify?

    <p>Each individual on the scene is accounted for. (C)</p> Signup and view all the answers

    Which benchmark indicates the initial application of water from an interior position during firefighting?

    <p>'Water on the Fire' signifying water application. (D)</p> Signup and view all the answers

    What is included in a status report during a change of command?

    <p>The current fireground strategy and Incident Action Plan (B)</p> Signup and view all the answers

    Which aspect is NOT part of the C-A-N Report format for progress reporting?

    <p>Objectives (C)</p> Signup and view all the answers

    When should company officers initiate a progress report?

    <p>At a time that is most conducive to operations (C)</p> Signup and view all the answers

    Which of the following is a regular responsibility of Division/Group Supervisors?

    <p>To regularly report progress or lack of progress on assignments (A)</p> Signup and view all the answers

    What information is NOT typically relayed in a progress report?

    <p>Details on the Incident Commander’s strategy (C)</p> Signup and view all the answers

    What does the initial radio report consist of?

    <p>Scene size up and establishing command (B)</p> Signup and view all the answers

    Which part of the initial report involves strategic planning for response?

    <p>Initial Action Plan (B)</p> Signup and view all the answers

    How is the initial radio report structured?

    <p>In two distinct parts: a brief report and an action plan (A)</p> Signup and view all the answers

    What is the primary goal of the initial action plan in an incident report?

    <p>To outline immediate tactical responses and resource deployment (D)</p> Signup and view all the answers

    What is typically included in the first part of the radio report?

    <p>Establishment of command and scene size up (B)</p> Signup and view all the answers

    If several apparatus arrive simultaneously, the member giving the Initial Radio Report shall be?

    <p>They must be the highest-ranking officer as the Incident Commander. (C)</p> Signup and view all the answers

    Which of the following is NOT included in the elements of the Initial Radio Report?

    <p>Specific names of the responding apparatus and their crew members. (D)</p> Signup and view all the answers

    When should the location of accountability be specified during the Initial Radio Report?

    <p>If the Command Post is not on the 'Alpha side' of the structure. (C)</p> Signup and view all the answers

    The Initial Radio Report shall consist of:

    <p>(1) CompanyDesignation (2) Building/Incident Description and Construction. (3) Problem Description (4)Name of Incident Commander and command mode. (5)LocationofAccountability</p> Signup and view all the answers

    The IAP Report shall include the following

    <p>(1) Findings from the 360 (2) ImmediateLifeSafetyIssues/HazardsIdentified (3) Location of the Fire (4) Incident Action Plan and Strategy (5)Additional Resources</p> Signup and view all the answers

    Which of the following reports may be included in the IAP report during the Investigation Mode?

    <p>360° Report (D), Announcement of a situation contained (A)</p> Signup and view all the answers

    L-U-N-A-R Report

    <p>Location, Unit, Name, Air, Resources</p> Signup and view all the answers

    Radio Restriction

    <p>Promptsalllistenerstostoptalkingovertheradio unless a life safety message must be relayed.</p> Signup and view all the answers

    The term Emergency is referred as:

    <p>should be used whenever requesting assistance for reason of personal safety from potentially violent situations.</p> Signup and view all the answers

    Emergency assistance requests will be in one of two modes

    <ol> <li>10-57- A deteriorating situation that may cause personal harm.</li> <li>10-3- An imminent danger situation.</li> </ol> Signup and view all the answers

    What is the minimum duration for which the Emergency Banner button should be depressed to notify the Fire Alarm Office of an emergency?

    <p>1.5 seconds (A)</p> Signup and view all the answers

    Which response code should be used if a dispatcher requests you to check your display?

    <p>10-3 (A), 10-57 (D)</p> Signup and view all the answers

    What will the dispatcher do if there is no answer after their initial request?

    <p>Initiate a 10-3 response (B)</p> Signup and view all the answers

    What information should you provide following a request for emergency assistance?

    <p>Your company designation and location (D)</p> Signup and view all the answers

    What action is expected when responding to the Fire Alarm Office after pressing the Emergency Banner?

    <p>Check and confirm your display (B)</p> Signup and view all the answers

    What is the first action the Fire Alarm Office takes when a 10-57 response is requested?

    <p>Ask the company for a nature (A)</p> Signup and view all the answers

    How often does the Dispatcher check on the unit's status during a 10-57 response?

    <p>Every 2 minutes (D)</p> Signup and view all the answers

    What may the Fire Alarm Office Lieutenant decide to do based on the situation during a 10-57 response?

    <p>Send fire apparatus to the scene (D)</p> Signup and view all the answers

    What equipment are members advised to wear if available during a 10-57 response?

    <p>Ballistic helmets and vests (D)</p> Signup and view all the answers

    What action must the Dispatcher take after a 10-57 response request is received?

    <p>Notify the Fire Alarm Office Lieutenant (B)</p> Signup and view all the answers

    What is the primary purpose of activating the 'Radio Restriction Tone' during a 10-3 response?

    <p>To prompt only assigned companies to remain on the channel (B)</p> Signup and view all the answers

    Which statement accurately describes the actions taken by the Fire Alarm Office when a 10-3 response is initiated?

    <p>The Fire Alarm Office will dispatch two fire apparatus and other supervisory personnel. (D)</p> Signup and view all the answers

    If two fire apparatus are dispatched to a 10-3 incident, where should they stage upon arrival?

    <p>Away from the scene following the first in officer's decisions (C)</p> Signup and view all the answers

    What equipment should members wear if it is available during a 10-3 response?

    <p>Ballistic helmets and vests for safety (D)</p> Signup and view all the answers

    What is the first step a member should take upon receiving an order from an officer who is not their immediate supervisor?

    <p>State any previous orders and the officer who issued them. (D)</p> Signup and view all the answers

    Once a member has received a new order that supersedes a previous order, what is the member expected to do after completing the new order?

    <p>Report the fact to their supervising officer. (A)</p> Signup and view all the answers

    What should a member do if they are ordered to carry out a task that contradicts a previous order?

    <p>Follow the judgment of the officer issuing the new order. (A)</p> Signup and view all the answers

    Which of the following best describes the order of actions a member should follow upon receiving conflicting orders?

    <p>State previous orders, comply with the new order, then report completion. (D)</p> Signup and view all the answers

    Which of the following responsibilities does the Incident Commander NOT have during a working incident?

    <p>Deploy personnel to civilian tasks (D)</p> Signup and view all the answers

    What is required to define an incident as a 'working incident'?

    <p>Multiple resources are required to achieve situation containment (A)</p> Signup and view all the answers

    Which task should the Incident Commander prioritize first upon assumption of command at the incident scene?

    <p>Transmit the initial radio report (A)</p> Signup and view all the answers

    Which statement correctly describes the Incident Commander's role concerning outside agencies?

    <p>The Incident Commander coordinates activities of outside agencies. (D)</p> Signup and view all the answers

    What should the Incident Commander do if an incident does not follow the initial action plan as the situation evolves?

    <p>Assess and modify the Incident Action Plan as needed (B)</p> Signup and view all the answers

    What is the primary responsibility of the fire marshal in relation to major fires?

    <p>To investigate its cause, origin, and circumstances (C)</p> Signup and view all the answers

    Which of the following actions must an officer take after investigating a fire?

    <p>Provide a written statement within one week (C)</p> Signup and view all the answers

    What must the investigation determine regarding the fire?

    <p>If the fire was a result of carelessness or design (D)</p> Signup and view all the answers

    Within what timeframe must an officer report the facts surrounding a fire to the fire marshal?

    <p>Within one week of the fire (B)</p> Signup and view all the answers

    Which of the following best describes an officer's obligations regarding fire investigations?

    <p>To notify the marshal and document all relevant facts (B)</p> Signup and view all the answers

    Under which circumstance should an Incident Commander definitely contact a FEIU Investigator?

    <p>When the cause and origin of a fire cannot be determined (C), When there is a possibility of smoke inhalation injuries (D)</p> Signup and view all the answers

    Which of the following scenarios does NOT require the intervention of a FEIU Investigator?

    <p>A classroom fire occurs in a school with no injuries reported (A)</p> Signup and view all the answers

    In which situation should a FEIU Investigator be involved immediately?

    <p>A fire incident involving suspected arson that requires an immediate arrest (C)</p> Signup and view all the answers

    What type of incident can be considered a priority for involving a FEIU Investigator?

    <p>A HazMat situation with potential criminal ties (C)</p> Signup and view all the answers

    Which of the following scenarios would warrant contacting a FEIU Investigator due to potential criminal involvement?

    <p>The discovery of a suspicious package within city limits (D)</p> Signup and view all the answers

    What is the primary purpose of the Fixed Command option during an incident?

    <p>To provide stable command and control over assigned units. (B)</p> Signup and view all the answers

    Which of the following distinguishes Mobile Command from Fixed Command?

    <p>It allows for maneuverability of command functions across the incident area. (A)</p> Signup and view all the answers

    In which circumstance would the Pass Command option be most appropriate?

    <p>When immediate action of the first arriving officer in order to stabilize the situation, and where, due to staffing and/or experience factors, (D)</p> Signup and view all the answers

    Which statement best reflects a key responsibility of the first arriving division officer regarding command options?

    <p>They have the discretion to select the command that best meets the needs of the incident. (A)</p> Signup and view all the answers

    Which of the following scenarios would warrant the implementation of the Mobile Command option?

    <p>Mobile Command is utilized in situations when the division officer or member assuming command accompanies his/her crew in order to investigate the situation. (B)</p> Signup and view all the answers

    What is included in a transfer of command brief at the Command Post?

    <p>Incident priorities and strategic goals (B)</p> Signup and view all the answers

    Which of the following tactical objectives must be covered during a transfer of command?

    <p>Tactical objectives assigned and remaining objectives (D)</p> Signup and view all the answers

    What aspect of tactical objectives is NOT required to be communicated during a transfer of command?

    <p>New personnel assignments (D)</p> Signup and view all the answers

    In a transfer of command, which element is crucial to ensure operational effectiveness?

    <p>Tactical objectives achieved (A)</p> Signup and view all the answers

    What is the primary purpose of Divisions in the management of an incident?

    <p>To divide an incident geographically. (D)</p> Signup and view all the answers

    When is it necessary to implement Branches in incident management?

    <p>When the number of Divisions or Groups exceeds the span of control. (D)</p> Signup and view all the answers

    Which statement accurately describes the function of Groups in incident management?

    <p>Groups focus on specific functional operations within the incident. (C)</p> Signup and view all the answers

    What distinguishes the use of Divisions from Groups in incident management?

    <p>Divisions are geographical subdivisions, while Groups are functional subdivisions. (D)</p> Signup and view all the answers

    What challenge does the implementation of Branches address in incident management?

    <p>Exceeding the span of control due to high numbers of Divisions or Groups. (C)</p> Signup and view all the answers

    What information does the Division or Group Supervisors NOT require when established by an Incident Commander?

    <p>Incident location details (D)</p> Signup and view all the answers

    Which of the following components is NOT part of the 3T's for Division or Group Supervisors?

    <p>Technical specifications (D)</p> Signup and view all the answers

    Which statement accurately describes the type of tasks Division or Group Supervisors manage?

    <p>Operational tasks like Fire Attack and Rescue (C)</p> Signup and view all the answers

    Which of the following best summarizes the role of Talk group(s) in the context of an Incident Command?

    <p>They facilitate communication for assigned tasks among teams. (D)</p> Signup and view all the answers

    In the context of the 3T's, which of the following tasks would NOT typically be included?

    <p>Rehabilitation (C)</p> Signup and view all the answers

    Which of the following is NOT a responsibility of a Branch Director?

    <p>Directly oversees the overall operations of the entire incident command. (A)</p> Signup and view all the answers

    Which statement accurately describes the coordination role of a Branch Director?

    <p>They ensure that activities of Divisions and Units are integrated within the Branch. (D)</p> Signup and view all the answers

    What is the primary function of a Branch Director during an incident?

    <p>Implement the portion of the Incident Action Plan appropriate to the Branch function. (A)</p> Signup and view all the answers

    Which of the following actions is part of a Branch Director's responsibility regarding resource management?

    <p>Keeping the Incident Commander informed of the status in the Branch’s area of responsibility. (B)</p> Signup and view all the answers

    Which aspect of logistical management is NOT a concern for a Branch Director?

    <p>Organizing the supply chain for the entire incident response. (B)</p> Signup and view all the answers

    Which General Staff position is responsible for the direction and coordination of all tactical Operations.

    <p>Operations (B)</p> Signup and view all the answers

    Which of the following General Staff positions focuses primarily on the responsible for all logistics functions needed for an incident.

    <p>Logistics (C)</p> Signup and view all the answers

    Which General Staff position would typically be responsible for all financial functions and documentation required for an incident. These responsibilities include:

    <p>Finance/Administration (D)</p> Signup and view all the answers

    In which General Staff position would you find personnel responsible for the collection, evaluation, dissemination, and use of information about the development of the incident and the status of resources

    <p>Planning (D)</p> Signup and view all the answers

    Which General Staff position is responsible for managing information about the incident status and resources.

    <p>Planning (C)</p> Signup and view all the answers

    Which priority must the Incident Commander always prioritize above all else?

    <p>Life Safety (C)</p> Signup and view all the answers

    What is the main focus of incident stabilization according to incident management priorities?

    <p>To implement a command structure matching the incident's complexity (B)</p> Signup and view all the answers

    What does property conservation entail in the context of incident management?

    <p>Implementing strategies to minimize additional property damage during an incident (D)</p> Signup and view all the answers

    Which of the following statements best reflects the importance of life safety in incident management?

    <p>No incident is deemed successfully managed without a focus on life safety. (B)</p> Signup and view all the answers

    Which priority should guide the strategy when managing an incident involving multiple complexities?

    <p>Match the command structure to the incident's complexity (B)</p> Signup and view all the answers

    What benchmark signifies that the primary search has been completed and conditions are safe?

    <p>Life Safety/Rescue: All Clear (D)</p> Signup and view all the answers

    Which benchmark is utilized to indicate that the incident is under control and potential hazards are managed?

    <p>Incident Stabilization: Situation Contained (D)</p> Signup and view all the answers

    Which factor is critical in the process of property conservation after an incident?

    <p>Salvage and Overhaul (A)</p> Signup and view all the answers

    What does the benchmark of 'All Clear' specifically relate to in fire incident management?

    <p>Confirmation of no remaining occupants (D)</p> Signup and view all the answers

    Which of the following benchmarks is NOT directly related to incident management?

    <p>Resource Allocation: Unit Activation (B)</p> Signup and view all the answers

    What is the highest priority in defensive operations?

    <p>Life safety (C)</p> Signup and view all the answers

    Which of the following describes the second priority in defensive operations?

    <p>Exposure protection (D)</p> Signup and view all the answers

    In defensive operations, what is the order of priorities?

    <p>Life safety followed by exposure protection (B)</p> Signup and view all the answers

    What should be considered the primary concern during a defensive operational response?

    <p>Safety of personnel on scene (C)</p> Signup and view all the answers

    When prioritizing objectives in defensive operations, which of the following is crucial?

    <p>Ensuring life safety (A)</p> Signup and view all the answers

    Which factor is primarily concerned with the adaptability of hose lines during firefighting operations?

    <p>Mobility (D)</p> Signup and view all the answers

    What element plays the biggest role in ensuring that firefighters can access water without delays during firefighting?

    <p>Supply (A)</p> Signup and view all the answers

    When preparing for firefighting, which factor is least concerned with operational readiness?

    <p>Water Quality (B)</p> Signup and view all the answers

    Which characteristic most directly influences the time it takes to deploy and use hose lines in an emergency?

    <p>Speed (B)</p> Signup and view all the answers

    Which factor should be prioritized for ensuring that hose lines are effectively positioned in relation to the fire?

    <p>Placement (C)</p> Signup and view all the answers

    Which ventilation factor is NOT considered to influence fire growth directly?

    <p>Size of the fire engine (B)</p> Signup and view all the answers

    What is the essential principle that should guide ventilation actions during a fire?

    <p>Vent with purpose (B)</p> Signup and view all the answers

    What could be a potential consequence of uncontrolled forcible entry during firefighting?

    <p>Firefighter or civilian injury (D)</p> Signup and view all the answers

    Which of the following statements best describes a key risk associated with improper ventilation?

    <p>It can increase oxygen supply for the fire (D)</p> Signup and view all the answers

    Besides ventilation openings, what other factors must be taken into account when assessing fire growth?

    <p>Wind speed and direction (B)</p> Signup and view all the answers

    What is the required action when there are fire-related deaths or life-threatening injuries?

    <p>Inform the Battalion Chief regardless of fire circumstances. (D)</p> Signup and view all the answers

    In what scenario would a Battalion Chief request a Fire Investigator?

    <p>When there is a fatality related to a fire incident. (C)</p> Signup and view all the answers

    Which of the following scenarios requires the notification of the Battalion Chief?

    <p>An auto fire with injuries to civilians. (B)</p> Signup and view all the answers

    What distinguishes the notification requirement for the Battalion Chief from other fire incidents?

    <p>All fire-related deaths or life-threatening injuries trigger this requirement. (A)</p> Signup and view all the answers

    What type of incidents does the notification of the Battalion Chief encompass?

    <p>All fire situations, including auto fires, regardless of typical response protocols. (C)</p> Signup and view all the answers

    Which of the following batteries is specifically approved for use?

    <p>Duracell® Procell PC 1604 9 volt (A)</p> Signup and view all the answers

    What is the voltage rating of the Duracell® battery that is approved as a 1.5 volt option?

    <p>1.5 volt (C)</p> Signup and view all the answers

    Which of these batteries is NOT approved for use?

    <p>Rayovac® 1.5 volt AA (A), Energizer® Pro 9 volt (C)</p> Signup and view all the answers

    Which pair of batteries are both among the only ones approved for use?

    <p>Duracell® Procell PC 1604 9 volt and Duracell® PC 1500 1.5 volt AA (A)</p> Signup and view all the answers

    What type of battery is the Duracell® PC 1500 classified as?

    <p>Alkaline battery (C)</p> Signup and view all the answers

    What is the maximum work time allowed for members in water with a temperature of 78°F?

    <p>60 minutes (D)</p> Signup and view all the answers

    What is the work time limit for members when the water temperature is 45°F?

    <p>40 minutes (B)</p> Signup and view all the answers

    At what water temperature is the work time limited to only 20 minutes?

    <p>Below 40°F (C)</p> Signup and view all the answers

    When the water temperature is at 70°F, how much work time do members have?

    <p>40 minutes (D)</p> Signup and view all the answers

    Which of the following is true regarding work time limits in water temperatures below 40°F?

    <p>Members can only work for 20 minutes. (C)</p> Signup and view all the answers

    Which types of buildings are classified under Fire Alarm 'A' occupancy?

    <p>Double and single family residences and small mercantile (D)</p> Signup and view all the answers

    What is the primary focus of occupancies included in Fire Alarm 'A' classification?

    <p>Residential and small commercial facilities (C)</p> Signup and view all the answers

    Which option does NOT represent a type of occupancy classified under Fire Alarm 'A'?

    <p>Multi-story office complexes (B)</p> Signup and view all the answers

    Which types of buildings are classified as high life hazard occupancies?

    <p>Multi-family apartments and warehouses (B)</p> Signup and view all the answers

    What triggers a Fire Alarm 'B' notification?

    <p>All water flow alarms detected in high life hazard occupancies (A)</p> Signup and view all the answers

    Which of the following facilities would NOT typically fall under high life hazard occupancies?

    <p>Private residential bungalows (A)</p> Signup and view all the answers

    Which of the following is NOT considered a characteristic of a Fire Alarm 'B' notification?

    <p>Specific to low risk environments (B)</p> Signup and view all the answers

    Which of the following descriptions accurately relates to the Fire Alarm ‘High Rise’ (FAH) criteria?

    <p>Relevant to commercial and residential occupancies greater than six stories above ground. (B)</p> Signup and view all the answers

    In the context of Fire Alarm ‘High Rise’ systems, what is the minimum height that qualifies a building for consideration?

    <p>Six stories above ground. (D)</p> Signup and view all the answers

    What key characteristic defines a building suitable for the Fire Alarm ‘High Rise’ criteria?

    <p>Height exceeding six stories above ground. (A)</p> Signup and view all the answers

    Who must approve the initiation of a modified alarm response?

    <p>Emergency Services Deputy Chief (ES-2) (B)</p> Signup and view all the answers

    Which of the following scenarios could lead to a modification of the alarm response by the Fire Alarm Office?

    <p>Potential limited resource availability (D)</p> Signup and view all the answers

    What types of occupancy does the modified alarm response apply to?

    <p>All occupancy types (D)</p> Signup and view all the answers

    Who has the authority to modify the assignment related to the alarm response?

    <p>Fire Alarm Office or first-due company officer (B)</p> Signup and view all the answers

    What is the primary reason for initiating a modified alarm response?

    <p>To address potential limited resource availability (A)</p> Signup and view all the answers

    What should be the primary concern when responding to fires in residences?

    <p>Rescue of trapped individuals (C)</p> Signup and view all the answers

    In which order should the concerns be prioritized by the Incident Commander?

    <p>Rescue, Exposure, Confinement, Extinguishment, Overhaul (B)</p> Signup and view all the answers

    What action follows after the fire has been extinguished according to the concerns of the Incident Commander?

    <p>Overhaul (B)</p> Signup and view all the answers

    How should ventilation and salvage operations be prioritized during an incident?

    <p>At any point deemed necessary by the Incident Commander (A)</p> Signup and view all the answers

    What is the required diameter for supply lines used in residential fires?

    <p>5” LDH (D)</p> Signup and view all the answers

    Which requirement must be fulfilled for ground ladders to be utilized during firefighting operations?

    <p>Any floor of the building must be above ground level. (D)</p> Signup and view all the answers

    When should supply lines be laid and charged during firefighting operations?

    <p>Whenever interior crews expect to use more than 25% of the vehicle's water tank capacity. (B)</p> Signup and view all the answers

    What is the primary purpose of backup lines during an interior attack?

    <p>To be established as soon as possible after the attack is initiated. (D)</p> Signup and view all the answers

    In what situation can 3” supply lines be utilized within firefighting operations?

    <p>For refilling the tank or maintaining water supply for overhaul and mop-up operations. (D)</p> Signup and view all the answers

    What should be the primary course of action if no fire is visible and exterior basement access is available?

    <p>Start the attack from the exterior basement access. (C)</p> Signup and view all the answers

    Which condition warrants breaking or opening basement windows before water is announced on the fire?

    <p>To perform a transitional fire attack. (C)</p> Signup and view all the answers

    What is a critical consideration during coordinated ventilation at basement fires?

    <p>Ventilating from above can create dangerous flow pathways. (B)</p> Signup and view all the answers

    Which scenario would necessitate operating on the floor above the fire prior to applying water to the basement?

    <p>During extreme situations only. (B)</p> Signup and view all the answers

    When should ventilation from above be avoided in the case of uncontrolled basement access?

    <p>Until water on the fire has been announced. (A)</p> Signup and view all the answers

    What is the composition of the response team for a fire alarm when nothing is showing?

    <p>2 Engines, 1 Ladder, and 1 Chief (A)</p> Signup and view all the answers

    During Level I Staging, what is the responsibility of the second engine's operator?

    <p>Coordinate with the first engine operator for water supply (D)</p> Signup and view all the answers

    What constitutes an upgrade in assignment during Level I Staging when smoke or fire is discovered?

    <p>Upgrading to a High-Rise Fire Assignment (B)</p> Signup and view all the answers

    In the context of fire response, what is the role of the Battalion Chief during Level I Staging?

    <p>Assume incident command and oversee operations (B)</p> Signup and view all the answers

    What is the first step for the crew when they report to the lobby during a fire alarm response?

    <p>Establish Lobby Control with necessary equipment (D)</p> Signup and view all the answers

    What is the composition of the response team for a fire alarm at Level I staging when nothing is showing?

    <p>2 Engines, 1 Ladder, 1 Chief (C)</p> Signup and view all the answers

    During Level I staging when smoke or fire is present, what group is formed on the floor below the fire?

    <p>Fire Attack Group (C)</p> Signup and view all the answers

    What is the responsibility of the second engine in situations where smoke or fire is discovered?

    <p>To coordinate water supply and pumping with the first engine (B)</p> Signup and view all the answers

    What action should the crew take upon arrival at the incident in terms of lobby control?

    <p>Report to the lobby with equipment and initiate Lobby Control (A)</p> Signup and view all the answers

    What upgrade in assignment occurs when smoke or fire is discovered during Level I staging?

    <p>High-Rise Fire Assignment (C)</p> Signup and view all the answers

    What best describes the definition of 'Delta P' hazards?

    <p>Hazards caused by differing water levels between intersecting bodies of water (B)</p> Signup and view all the answers

    Which of the following actions represents the highest risk during a water rescue operation?

    <p>Entering the water to rescue the victim (B)</p> Signup and view all the answers

    What characterizes 'moving water' in rescue contexts?

    <p>Water that is currently flowing faster than 1 knot (D)</p> Signup and view all the answers

    How is 'flood water' defined?

    <p>Water in areas that do not typically have water, such as streets and parking lots (B)</p> Signup and view all the answers

    Which type of water is NOT considered moving water?

    <p>A pond with still water (D)</p> Signup and view all the answers

    What is the protocol for dispatching EMS-10?

    <p>EMS-10 is dispatched whenever three or more medic vehicles are assigned. (A)</p> Signup and view all the answers

    What is the correct assignment for a Vehicle Accident with possible entrapment?

    <p>1 Engine, 1 Extrication company, 1 Medic, 1 EMS Officer, 1 Rescue (D)</p> Signup and view all the answers

    Which scenario is considered a high-risk incident involving vehicle accidents?

    <p>An accident involving a heavy vehicle and multiple victims (D)</p> Signup and view all the answers

    What defines extrication companies in the context of vehicle accidents?

    <p>Any company equipped with extrication tools and trained in their use (C)</p> Signup and view all the answers

    Which of the following conditions may NOT classify a vehicle accident as high risk?

    <p>An accident involving a single small vehicle (A)</p> Signup and view all the answers

    In the context of vehicle accidents, which of the following is NOT typically part of the high-risk criteria?

    <p>Accidents at night (A)</p> Signup and view all the answers

    What is the appropriate response for incidents occurring above ground?

    <p>An appropriate response will be provided. (C)</p> Signup and view all the answers

    What is included in the Tunnel Rescue Response for incidents below ground?

    <p>1 E, 1 L, 3 R, 1 M, HazMat 4(E, M, R, HZ4, Decon 4), 1 RSU, RS-10, 1 EMSO, 1 BN, SO2 (D)</p> Signup and view all the answers

    Which resource is specifically designated for hazardous materials during an incident?

    <p>HazMat 4, with additional resources as needed. (B)</p> Signup and view all the answers

    How many engines are included in the standard assignment for a HazMat Incident?

    <p>3 engines (A)</p> Signup and view all the answers

    Which component is included in the standard HazMat Incident assignment that is specifically related to medical support?

    <p>1 medic (B)</p> Signup and view all the answers

    What role is assigned two units in the response for a HazMat Incident?

    <p>Ladders (A)</p> Signup and view all the answers

    Which of the following is NOT listed in the standard assignment for a HazMat Incident?

    <p>Fire engine (C)</p> Signup and view all the answers

    How many battalion chiefs are included in the standard assignment for a HazMat Incident?

    <p>2 battalion chiefs (C)</p> Signup and view all the answers

    Flashcards

    Speeding Alert

    The GPS system automatically checks the vehicle's speed against the posted speed limit and sends an alert if the vehicle exceeds the limit by 30 MPH or more for two consecutive pings.

    High-Speed Alert

    The GPS system monitors the vehicle's speed and sends an alert if the vehicle reaches 90 MPH at any point.

    Idling Alert

    The GPS system tracks the vehicle's idling time and sends an alert if it idles for 4 hours or more.

    Location Alert

    The GPS system tracks the vehicle's location and sends an alert if it leaves Franklin County and its neighboring counties.

    Signup and view all the flashcards

    Ping

    The GPS system periodically sends a signal to the vehicle, allowing it to collect data and send alerts.

    Signup and view all the flashcards

    Driver Supervision Responsibility

    A law enforcement officer is accountable for the actions of a driver under their direct supervision.

    Signup and view all the flashcards

    Officer's Liability

    When a driver is directly supervised by an officer, the officer is responsible for any violations or accidents.

    Signup and view all the flashcards

    Indirect Responsibility

    The officer is held responsible for the driver's actions, even if they are not directly controlling the vehicle.

    Signup and view all the flashcards

    Full Scope of Responsibility

    The officer's responsibility covers all actions of the driver while under their direct supervision.

    Signup and view all the flashcards

    Direct Supervision

    Direct supervision means the officer is physically present and actively overseeing the driver.

    Signup and view all the flashcards

    Emergency Vehicle Stops

    Drivers must come to a complete stop at designated locations, such as blind intersections or when directed by law enforcement. This ensures safety and prevents accidents.

    Signup and view all the flashcards

    Chocking Fire Vehicles

    When a Fire vehicle is stopped and the driver is not in the seat, the wheels must be secured with chocks, both at the front and back. This prevents the vehicle from rolling accidentally.

    Signup and view all the flashcards

    Railroad Crossing Stop

    At unguarded railroad crossings, Fire vehicle drivers must come to a complete stop. This ensures safety as trains can be unpredictable.

    Signup and view all the flashcards

    Intersection Stops

    When a driver is unsure about traffic conditions at an intersection, they must come to a complete stop. This ensures visibility and safe navigation.

    Signup and view all the flashcards

    Stopping for School Buses

    Drivers must always stop for stopped school buses with flashing lights active. This ensures the safety of children getting on or off the bus.

    Signup and view all the flashcards

    Backup Assistance

    To ensure a safe maneuver, at least one member of the team must be outside the vehicle, directing the driver and assisting them.

    Signup and view all the flashcards

    Visual & Voice Contact

    The driver and the individual(s) assisting with backing must maintain constant visual and vocal communication throughout the backing procedure.

    Signup and view all the flashcards

    Visibility Stop

    If the individual(s) assisting with backing are not visible, the driver must immediately stop the vehicle.

    Signup and view all the flashcards

    Portable Radio Communication

    The individual(s) assisting with backing must have access to a portable radio, on the same frequency as the driver, for clear vocal communication.

    Signup and view all the flashcards

    Driver Radio Monitoring

    The driver is responsible for constantly monitoring radio communications from the individual(s) assisting with backing, if a portable radio is available.

    Signup and view all the flashcards

    What is the Rescue Support Unit (RSU)?

    The Rescue Support Unit (RSU) is equipped with tools, equipment, and absorbent materials for technical rescue incidents. It's primarily used by rescue personnel to assist in these situations.

    Signup and view all the flashcards

    Who's in charge of transporting the RSU?

    Station 5 and 19 are primarily responsible for taking the RSU to incidents, but if they aren't available, the FAO will dispatch the next nearest available company.

    Signup and view all the flashcards

    Who can use the absorbent materials?

    Any company can use the absorbent materials carried on the RSU when needed. This ensures the absorbent is readily available for various rescue situations.

    Signup and view all the flashcards

    Who returns the RSU equipment?

    The rescue company involved in the incident is responsible for returning the tools and equipment to the RSU after use.

    Signup and view all the flashcards

    Who replenishes the RSU absorbent?

    If the absorbent is used, the company that requested the RSU is responsible for ensuring it's replaced quickly from Logistics or Station 4.

    Signup and view all the flashcards

    Following Orders

    Members must follow all orders and directions from the Columbus FAO or other jurisdiction's dispatch center.

    Signup and view all the flashcards

    Disregarding Orders

    Members cannot ignore or disregard orders from the dispatch center.

    Signup and view all the flashcards

    Issuing Orders

    Members cannot issue orders to the dispatch center. They must follow the chain of command.

    Signup and view all the flashcards

    Violation

    Any member who breaks these rules may face disciplinary action or consequences.

    Signup and view all the flashcards

    Purpose of the Rules

    The purpose of these rules is to ensure safety, coordination, and efficiency in responding to fire and emergency situations.

    Signup and view all the flashcards

    What is the purpose of the B#IC talkgroup?

    B#IC talkgroup is used for critical communication, like reporting arrival, adding or replacing companies, communicating non-critical details with the Fire Alarm Office, and relaying critical information between the Incident Commander and responding companies. The level of usage is determined by the Incident Commander.

    Signup and view all the flashcards

    What is the purpose of the B#FG talkgroup?

    B#FG talkgroup is used for general communication during multi-company incidents, allowing for constant monitoring of the situation and coordination between responding units.

    Signup and view all the flashcards

    Who should monitor the B#IC and B#FG talkgroups?

    All companies involved in a multi-company incident should monitor both the B#IC and B#FG talkgroups while responding.

    Signup and view all the flashcards

    Who should monitor the talkgroups for the entire incident?

    Chiefs and Safety Officers should monitor both talkgroups throughout the duration of the incident.

    Signup and view all the flashcards

    What type of communication can be done on the B#IC talkgroup?

    Verbally marking 'responding' when no MDC is available, reporting arrival on scene (unless instructed otherwise), and communicating with the Fire Alarm Office and other Chiefs/Safety Officers are all acceptable uses of the B#IC talkgroup. However, the Incident Commander has the authority to determine the level of communication on this talkgroup.

    Signup and view all the flashcards

    B# FG Talkgroup

    The talkgroup used by the first arriving companies, including engines, ladders, and the Battalion Chief, for initial reports, scene status updates, and tactical fireground communication.

    Signup and view all the flashcards

    B# TAC Talkgroup

    This talkgroup is used by companies assigned to Divisions and Groups during a multi-alarm fire incident. It also serves for communication within an expanded Incident Command System.

    Signup and view all the flashcards

    BN# STG Talkgroup

    This talkgroup is dedicated to communication for companies operating within the Level II Staging Area, which is used for multi-alarm incidents.

    Signup and view all the flashcards

    B#IC Talkgroup

    Used for critical communication during incidents, including reporting arrival, adding/replacing companies, non-critical details with the Fire Alarm Office, and relaying information between the Incident Commander and responding units.

    Signup and view all the flashcards

    B# Direct Talkgroup

    Used for situations with potential communication issues, like operating below ground or in high-rise buildings.

    Signup and view all the flashcards

    Situation Contained

    This benchmark indicates that the fire has been stabilized and can be effectively handled by the companies already on scene. It signifies a shift from active firefighting to managing the situation.

    Signup and view all the flashcards

    Water on the Fire

    This benchmark means the first hoseline has reached the fire and water is being applied from an interior position. It also suggests that safe ventilation may soon be possible.

    Signup and view all the flashcards

    360 Complete

    This indicates the completion of a full 360-degree assessment of the fire scene, ensuring a comprehensive understanding of the situation.

    Signup and view all the flashcards

    Personnel Accountability Report (PAR)

    This benchmark is announced when the Incident Commander determines that all personnel assigned to the incident have been accounted for. It's a critical safety check during any fire operation.

    Signup and view all the flashcards

    RIT Established

    This benchmark indicates that a dedicated Rapid Intervention Team (RIT) has been established with specific companies assigned and their location known. It's a vital part of firefighter safety during a fire.

    Signup and view all the flashcards

    Status Report

    A radio announcement made by the assuming officer after each change of command, or as needed, to relay the current fireground strategy and the Incident Action Plan.

    Signup and view all the flashcards

    Progress Report

    A regular communication between incident command and companies assigned to the incident, providing updates on progress made, challenges encountered, and needed resources.

    Signup and view all the flashcards

    C-A-N Report

    A standardized format for progress reports, including current conditions, actions being taken, and any needs for additional support.

    Signup and view all the flashcards

    Initial Radio Report

    The initial radio report establishes the scene's size and sets up command. It lays the groundwork for coordinated action.

    Signup and view all the flashcards

    Initial Action Plan

    The Initial Action Plan outlines the immediate steps and strategies to be taken to address the fire or emergency situation.

    Signup and view all the flashcards

    Incident Commander Designation

    The member giving the first radio report at an incident designates the highest ranking officer present as the incident commander.

    Signup and view all the flashcards

    Multistory Building Designation

    When a building is over two stories tall but within reach of the aerial ladder, it may be designated as 'multistory'.

    Signup and view all the flashcards

    Building Identification

    When the building is well-known, using its name is sufficient for identification (e.g., Kroger, Days Inn, McDonalds).

    Signup and view all the flashcards

    Occupancy Description

    The initial report includes the building's occupancy type, like residence, apartment, hospital, hotel, business, etc.

    Signup and view all the flashcards

    How to activate an emergency banner

    When a fire alarm is activated, you should press the Emergency Banner button on the radio for at least 1.5 seconds to notify the Fire Alarm Office that emergency assistance is needed.

    Signup and view all the flashcards

    Responding after an Emergency Banner

    The Fire Alarm Office will request you to check your display for information about the fire. If possible, you should respond with either 10-57 (Emergency Assistance Requested) or 10-3 (Responding to the location).

    Signup and view all the flashcards

    Dispatcher's response to a silent Emergency Banner

    If you do not answer the dispatcher's request to check your display, they will repeat the request once and then initiate a 10-3 response to your location.

    Signup and view all the flashcards

    Reporting after an Emergency Banner activation

    Following an emergency banner activation, you should immediately provide your company designation and location to the Fire Alarm Office.

    Signup and view all the flashcards

    10-57 Response Protocol

    The Fire Alarm Office (FAO) initiates the following actions when a 10-57 emergency response is requested: 1) Request details of the situation from the requesting company; 2) Notify the Police Dispatcher about the request and obtain an estimated arrival time (ETA) for police; 3) Inform the on-duty FAO Lieutenant; 4) Monitor the police unit's status, checking every 2 minutes until the situation is under control; 5) Based on the situation and police ETA, the FAO Lieutenant may dispatch fire apparatuses to the scene; 6) If available, firefighters should don ballistic helmets and vests.

    Signup and view all the flashcards

    Emergency Banner Activation

    When a fire alarm is activated, pressing the Emergency Banner button on the radio for at least 1.5 seconds alerts the Fire Alarm Office that emergency assistance is needed.

    Signup and view all the flashcards

    Reporting After Emergency Banner Activation

    After activating an Emergency Banner, you should immediately provide your company designation and current location to the Fire Alarm Office.

    Signup and view all the flashcards

    Responding After Emergency Banner

    The Fire Alarm Office may request you to check your display for information about the fire, after an Emergency Banner activation. You should respond with either '10-57' (Emergency Assistance Requested) or '10-3' (Responding to the location), if possible.

    Signup and view all the flashcards

    10-3 Response Procedure

    When a 10-3 response is requested, the Fire Alarm Office (FAO) initiates actions like notifying the Police Dispatcher, activating a radio restriction tone, and sending two fire apparatus, a transport vehicle, EMS Supervisor, Battalion Chief, and SO2 to the location.

    Signup and view all the flashcards

    Radio Restriction Tone

    A radio restriction tone activated by the FAO when a 10-3 is announced. It repeats every 10 seconds, prompting listeners to stop talking, keeping the channel open for only assigned companies.

    Signup and view all the flashcards

    Following Orders From Other Officers

    A member should state any previous orders and the issuing officer, follow the judgment of the officer superseding the order, and report completing the superseded order to the member's own officer.

    Signup and view all the flashcards

    Superseding Orders

    When a member receives an order from an officer other than his/her immediate supervisor, they need to follow a specific protocol.

    Signup and view all the flashcards

    Completing Superseded Orders

    If an order from a different officer changes your current task, you must follow the new directive and complete the previous task afterward.

    Signup and view all the flashcards

    Reporting Superseded Orders

    After completing a superseded order, a member must inform their immediate supervisor that the task has been completed.

    Signup and view all the flashcards

    Procedure for Superseded Orders

    The process involves acknowledging the superseded order, following the higher order, and reporting the completion of the previous task.

    Signup and view all the flashcards

    Working Incident

    A situation that requires more than one resource to achieve Situation Contained.

    Signup and view all the flashcards

    Major Fire Investigation

    An official investigation into the cause, origin, and circumstances of a major fire, including whether it was intentional or due to negligence. The fire marshal and fire chief are responsible for conducting these investigations in municipal corporations.

    Signup and view all the flashcards

    Officer's Duty to Report

    Officers investigating fires in a municipal corporation must inform the fire marshal within one week of the event, providing details about the cause and origin. This information helps ensure fire safety.

    Signup and view all the flashcards

    When to Contact a FEIU Investigator

    A Fire and Explosives Investigation Unit (FEIU) Investigator should be contacted by phone for guidance when the Incident Commander is unsure if an incident requires their response.

    Signup and view all the flashcards

    When FEIU Response Is Required

    The Incident Commander on the scene must call for a FEIU Investigator in specific situations, like fires with undetermined causes, suspicious fires, fires involving juveniles, injuries or fatalities, incidents affecting educational facilities, nursing homes, or places of worship, fires causing significant property damage, suspicious packages or bombs, HazMat incidents with criminal connections, arrests for arson, and fires on City-owned property.

    Signup and view all the flashcards

    Undetermined Fire Cause

    Any fire where the Incident Commander is unable to determine the cause and origin.

    Signup and view all the flashcards

    Suspicious or Incendiary Fires

    A fire is considered suspicious or incendiary if it is believed to have been intentionally set, requiring further investigation by the FEIU.

    Signup and view all the flashcards

    Fires Involving Juveniles

    The FEIU Investigator must be called if a juvenile is suspected to have started a fire, regardless of whether it was accidental or intentional.

    Signup and view all the flashcards

    Command Commitment

    The first arriving division officer or member decides the level of command required for the incident, choosing between Fixed Command, Mobile Command, or Pass Command, based on the situation and resources available.

    Signup and view all the flashcards

    Fixed Command

    This command structure involves a designated location for the Incident Commander, often at a designated command post, where they oversee the incident.

    Signup and view all the flashcards

    Mobile Command

    This command structure allows the Incident Commander to move around the scene, often traveling in a fire apparatus or other vehicle, to better assess the situation and direct resources.

    Signup and view all the flashcards

    Pass Command

    This command structure involves transferring command to the next arriving higher-ranking officer, ensuring a seamless transition of leadership during the incident.

    Signup and view all the flashcards

    What is the first step in establishing command?

    The first arriving officer decides the level of command needed, choosing between Fixed, Mobile, or Pass Command, based on the situation and available resources. This decision ensures the best response to the incident.

    Signup and view all the flashcards

    Transfer of Command Brief

    A brief given by the officer being relieved to the officer assuming command, covering incident priorities, tactical objectives, and achievements.

    Signup and view all the flashcards

    Divisions in Incident Management

    Divisions are used to split an incident up geographically, helping to organize response efforts.

    Signup and view all the flashcards

    Groups in Incident Management

    Groups are used to group resources based on their specific function during an incident, ensuring efficient deployment.

    Signup and view all the flashcards

    Branches in Incident Management

    Branches, either geographical or functional, are used when the number of Divisions or Groups becomes too large for effective control.

    Signup and view all the flashcards

    Span of Control in Incident Management

    This organizational structure helps manage the span of control during incidents, ensuring efficient resource allocation and communication.

    Signup and view all the flashcards

    Supervisory Levels in Incident Management

    These supervisory levels provide a framework to effectively manage the incident, allowing for better coordination and resource utilization.

    Signup and view all the flashcards

    Division/Group Supervisor Information

    Information needed by Division or Group Supervisors when an Incident Commander establishes Divisions or Groups.

    Signup and view all the flashcards

    Command Level Decision

    The first arriving officer decides the level of command needed based on the situation and available resources.

    Signup and view all the flashcards

    Incident Divisions

    Geographic divisions are used to organize and manage response efforts based on location.

    Signup and view all the flashcards

    Incident Groups

    Functional groups are used to organize and manage resources based on their specific job at the incident.

    Signup and view all the flashcards

    What's a Branch Director's role?

    A Branch Director is responsible for implementing the relevant portion of the Incident Action Plan for their assigned Branch. Branches are frequently used in the Operations and Logistics sections.

    Signup and view all the flashcards

    What are the responsibilities of a Branch Director?

    1. Implements the appropriate part of the Incident Action Plan for their Branch.
    2. Coordinates the activities of Groups, Divisions, and Units within the Branch.
    3. Evaluates goals and objectives, requesting extra resources if needed.
    4. Keeps the Incident Commander or Section Chief updated on the Branch's progress.
    5. Assigns tasks to Divisions or Groups within the Branch.
    6. Solves logistical problems for Groups, Divisions, and Units within the Branch.
    Signup and view all the flashcards

    How does a Branch Director manage their team?

    A Branch Director coordinates the activities of various units within their Branch, ensuring their combined effort effectively implements the relevant portion of the Incident Action Plan.

    Signup and view all the flashcards

    What is the Incident Action Plan's role in a Branch?

    The Incident Action Plan provides a framework for coordinating activities within the Branch, ensuring everyone works towards the same goal. The Branch Director implements the plan's relevant parts for their area.

    Signup and view all the flashcards

    Why are Branches used?

    Branches are often utilized when a large number of Divisions or Groups are involved in an incident. This allows for better organization and management of resources.

    Signup and view all the flashcards

    General Staff Positions

    The General Staff Positions are the core roles that ensure a coordinated and efficient response to emergencies. Each position focuses on a specific area, working together to achieve situational control.

    Signup and view all the flashcards

    Operations Section

    The Operations Section is responsible for managing the tactical deployment and actions of fire units at the incident scene. It coordinates firefighting efforts and determines the most effective strategies for fire suppression.

    Signup and view all the flashcards

    Planning Section

    The Planning Section focuses on gathering and analyzing information about the incident. It provides the Incident Commander with accurate data and develops tactical objectives and strategies for a successful response.

    Signup and view all the flashcards

    Logistics Section

    The Logistics Section manages the resources, equipment, and supplies needed for the incident. It ensures a steady flow of essential items to support the ongoing operations.

    Signup and view all the flashcards

    Finance/Administration Section

    The Finance/Administration Section handles the financial aspects of the incident, including tracking expenses, managing budgets, and ensuring accountability for resources.

    Signup and view all the flashcards

    LifeSafety Priority

    The Incident Commander's primary concern is ensuring the safety of all individuals at the scene, including firefighters, emergency responders, occupants, and bystanders. This prioritizes human life over property damage and underscores the paramount importance of safety.

    Signup and view all the flashcards

    IncidentStabilization Priority

    This priority involves establishing a command structure and strategy to stabilize the incident. It emphasizes adapting the command structure to the incident's complexity rather than its size.

    Signup and view all the flashcards

    PropertyConservation Priority

    This priority focuses on achieving the incident's goals and objectives with minimal property damage. It aims to minimize property damage while effectively managing the incident.

    Signup and view all the flashcards

    Life Safety

    The first priority in defensive operations, ensuring the safety of personnel and protecting their lives.

    Signup and view all the flashcards

    Exposure Protection

    The second priority in defensive operations, protecting property and reducing damage caused by the incident.

    Signup and view all the flashcards

    Suspicious Fire

    A fire is considered suspicious or incendiary if it is believed to have been intentionally set, requiring further investigation by the FEIU (Fire and Explosives Investigation Unit).

    Signup and view all the flashcards

    Hose Line Size

    The size of the hose line determines the amount of water it can flow, affecting the fire's suppression effectiveness.

    Signup and view all the flashcards

    Hose Line Placement

    The placement of the hose line is crucial for targeting the fire effectively. Aiming it directly at the base of the flames will offer the best chance of suppression.

    Signup and view all the flashcards

    Hose Line Speed

    The speed at which water flows through the hose affects how quickly it can extinguish flames. Faster flow means quicker suppression.

    Signup and view all the flashcards

    Hose Line Mobility

    The mobility of the hose line influences the speed at which firefighters can move it around the fire scene. A flexible line is more adaptable to changing situations.

    Signup and view all the flashcards

    Hose Line Supply

    A steady water supply is crucial for fire suppression. Interruptions in the water flow can hinder firefighting efforts.

    Signup and view all the flashcards

    Ventilation

    The process of intentionally creating openings in a structure to control the flow of heat, smoke, and gases for the purpose of extinguishing the fire and improving safety.

    Signup and view all the flashcards

    Wind Effect on Ventilation

    Wind speed and direction significantly influence fire spread and behavior. Strong winds can push flames and smoke, making it difficult to fight the fire.

    Signup and view all the flashcards

    Ventilation Openings Impact

    The presence of additional ventilation openings, like windows, doors, or holes, can create natural drafts and accelerate fire growth. These openings can also provide oxygen to feed the flames.

    Signup and view all the flashcards

    Ventilation and Safety

    Proper ventilation strategies are crucial for firefighter safety. They allow for smoke and heat to escape, reducing risks for firefighters. However, uncontrolled ventilation can have negative consequences.

    Signup and view all the flashcards

    Uncontrolled Entry Dangers

    Uncontrolled entry can lead to serious consequences, including injury, death, and property loss. Performing forced entry without proper planning and consideration increases risks for everyone.

    Signup and view all the flashcards

    Fire Deaths/Injuries: Notification Requirement

    A Fire Investigator must be requested by the Battalion Chief in any fire situation which caused a death or life threatening injury, including auto fires, regardless of whether the Battalion Chief would normally respond to the incident.

    Signup and view all the flashcards

    When to Call FEIU Investigator

    The Incident Commander must call for a Fire and Explosives Investigation Unit (FEIU) Investigator in situations involving undetermined fire causes, suspicious fires, fires involving juveniles, injuries or fatalities, incidents affecting educational facilities, nursing homes, or places of worship, fires causing significant property damage, suspicious packages or bombs, HazMat incidents with criminal connections, arrests for arson, and fires on City-owned property.

    Signup and view all the flashcards

    What batteries are approved?

    Duracell® Procell PC 1604 9 volt and Duracell® PC 1500 1.5 volt AA are the only batteries approved for use.

    Signup and view all the flashcards

    Who needs to be notified about a major fire investigation?

    The officer investigating the fire must inform the fire marshal within one week of the event. The information provided must include details about the cause and origin of the fire.

    Signup and view all the flashcards

    When does the Incident Commander need to contact a FEIU investigator?

    The Incident Commander on the scene must call for a Fire and Explosives Investigation Unit (FEIU) Investigator in specific situations. These situations include fires with undetermined causes, suspicious fires, fires that involve juveniles, fires causing significant property damage, suspicious packages or bombs, or fires involving City-owned property.

    Signup and view all the flashcards

    What is involved in the transfer of command?

    The officer being relieved needs to give a brief to the officer assuming command. This brief covers key incident priorities, tactical objectives, and achievements of the incident.

    Signup and view all the flashcards

    Exposure Limits

    The time a member can work in water above 75°F is 60 minutes, below 75°F but above 40°F is 40 minutes, and below 40°F is 20 minutes.

    Signup and view all the flashcards

    Rapid Intervention Team (RIT)

    A designated team specifically created for rescuing firefighters who might become trapped or in danger during a fire event, ensuring their safety and prompt extraction.

    Signup and view all the flashcards

    Fire Alarm "A" (FA)

    Occupancy categories include double/single family homes, small apartments, strip malls, and small stores, excluding high life hazard occupancies.

    Signup and view all the flashcards

    Fire Alarm 'B'

    A Fire Alarm 'B' code is sent on all water flow alarms, indicating a possible fire that requires immediate response.

    Signup and view all the flashcards

    High Life Hazard Occupancies

    High life hazard occupancies are buildings where a major fire could quickly cause a significant loss of life. These include multi-family apartments, hospitals, etc.

    Signup and view all the flashcards

    High-Rise Classification

    Specifies that buildings over six stories are considered high-rise buildings for fire alarm purposes.

    Signup and view all the flashcards

    10-57 Emergency Response

    A type of emergency response initiated by the Fire Alarm Office (FAO) when a firefighter requests assistance. It involves a higher level of response and coordination with law enforcement.

    Signup and view all the flashcards

    What is a "Working Incident"?

    A response to a fire or emergency where the number of resources needed to achieve "Situation Contained" exceeds the normal response. This usually involves a larger scale incident requiring additional personnel and equipment.

    Signup and view all the flashcards

    How is the command level decided for an incident?

    The first arriving officer makes the decision based on the incident's complexity and resource availability. It's a key step in establishing an effective incident management structure.

    Signup and view all the flashcards

    What is a "Major Fire Investigation"?

    A specific type of fire investigation conducted by the fire chief and fire marshal in municipalities. It focuses on uncovering the origin, cause, and circumstances of a major fire, including whether it was intentional or accidental.

    Signup and view all the flashcards

    What are "Incident Divisions"?

    These are geographic divisions of the incident scene used to organize and manage response efforts. They help with efficient resource allocation and communication.

    Signup and view all the flashcards

    Why are "Branches" used in incident management?

    When an incident requires a large number of resources, Branches can be used to organize and manage the response effort, ensuring efficient deployment of Units, Groups, and Divisions. This allows for better control and communication.

    Signup and view all the flashcards

    Rescue

    This is the primary concern for incident commanders at all residential fires, ensuring the safety of occupants and firefighters.

    Signup and view all the flashcards

    Exposure

    The IC's second priority is to prevent the fire from spreading to nearby buildings or areas.

    Signup and view all the flashcards

    Confinement

    The IC's third priority is to limit the fire's spread within the structure or area.

    Signup and view all the flashcards

    Extinguishment

    This is the fourth priority for the IC, ensuring the complete elimination of the fire.

    Signup and view all the flashcards

    Overhaul

    The fifth priority for the IC, involves searching for hidden flames or potential rekindling.

    Signup and view all the flashcards

    Supply Line

    A line laid and charged from a hydrant to a fire scene to provide a continuous water supply for fire suppression operations. It's important for situations where interior fire crews might use more than 25% of the fire vehicle's water tank.

    Signup and view all the flashcards

    Backup Line

    A hoseline used to support the initial fire attack team by providing an additional stream of water, ensuring a continuous water supply in case the primary line runs dry.

    Signup and view all the flashcards

    Ground Ladder

    A hoseline that is placed in service when working on a roof or any floor of a building that is above ground level. Its use ensures a continuous water supply for fire suppression in elevated locations.

    Signup and view all the flashcards

    3" Supply Line

    Used for various operational purposes like refilling the fire truck's water tank, providing a water source for mopping up, and supporting overhaul operations. Ensure that it's connected to a supply line.

    Signup and view all the flashcards

    5" Supply Line

    A hoseline using a 5" diameter, often for residential fires. This larger diameter provides a stronger and more efficient water supply than smaller diameter hoses.

    Signup and view all the flashcards

    Transitional Fire Attack

    When a fire is suspected after the 360 assessment but not visible, firefighters should attempt to fight the fire from the exterior before entering the basement.

    Signup and view all the flashcards

    Ventilation Danger

    Opening a lower level ventilation opening while a fire is in the basement can create a flow path to the upper level, potentially increasing the fire's intensity dramatically.

    Signup and view all the flashcards

    Branch Directors

    They provide an Incident Action Plan, a framework for coordinating activities and ensuring everyone works towards the same goal.

    Signup and view all the flashcards

    High-Rise Fire Alarm Response

    The initial response to a fire alarm in a high-rise building involves two engines, one ladder truck, and one chief. The Investigation Group, comprised of one engine and one ladder, assesses the situation. The second engine stages at the fire department connection.

    Signup and view all the flashcards

    High-Rise Fire Escalation

    When smoke or fire is discovered in a high-rise building, the incident command upgrades the assignment to a High-Rise Fire Assignment. The Investigation Group transitions into the Fire Attack Group and positions itself on the floor below the fire. The second engine joins the Fire Attack Group on the floor below the fire, coordinating with the first engine to establish a water supply and series pumping to the fire department connection.

    Signup and view all the flashcards

    Incident Command at a High-Rise Fire Alarm

    The Battalion Chief assumes incident command at a high-rise fire alarm. The crew is responsible for establishing Lobby Control, securing the lobby area with equipment.

    Signup and view all the flashcards

    Level I Staging in High-Rise Fires

    Level I Staging refers to the initial positioning of fire units when responding to a fire alarm. Nothing Showing refers to the situation where no visible signs of fire or smoke are present. Smoke or Fire Showing indicates the discovery of visible smoke or fire.

    Signup and view all the flashcards

    Investigation Group Role

    The Investigation Group, comprised of one engine and one ladder, assesses the situation at the fire alarm scene. They determine if there is visible smoke or fire and report their findings to the Incident Commander.

    Signup and view all the flashcards

    Fire Incident Command in High-Rise Buildings

    The Battalion Chief assumes incident command at a high-rise fire. The crew reports to the lobby and conducts Lobby Control.

    Signup and view all the flashcards

    Water Supply Coordination in High-Rise Fires

    The second engine operator coordinates with the first engine operator regarding water supply and pumping to the fire department connection.

    Signup and view all the flashcards

    Delta P hazard

    A significant hazard for rescue workers where water levels differ significantly. Occurs at dams, sewer systems, and culverts.

    Signup and view all the flashcards

    Flood water

    Water covering areas not usually flooded, like streets, parking lots, and underpasses.

    Signup and view all the flashcards

    Moving water

    Water moving faster than 1 knot (1.15 mph).

    Signup and view all the flashcards

    Go rescue

    A rescue method involving entering the water or ice to directly contact the victim. The riskiest rescue option.

    Signup and view all the flashcards

    Static water

    Non-moving bodies of water, such as ponds, lakes, floods, and reservoirs.

    Signup and view all the flashcards

    When is EMS-10 Dispatched?

    EMS-10 is dispatched when three or more medical vehicles are assigned to an incident, providing extra resources and coordination.

    Signup and view all the flashcards

    Command Commitment in Incident Management

    The first arriving division officer or member determines the level of command needed, choosing between Fixed Command, Mobile Command, or Pass Command.

    Signup and view all the flashcards

    Incident Branches

    Branches are used when Divisions or Groups become too numerous for effective control, either geographically or functionally, providing a more hierarchical structure.

    Signup and view all the flashcards

    Vehicle Accident with Possible Entrapment or High Risk

    A vehicle accident involving possible entrapment or high-risk factors requires specific resources, including a fire engine, an extrication company, a paramedic, an EMS officer, and a rescue unit.

    Signup and view all the flashcards

    Extrication Company

    Any fire apparatus equipped with extrication tools and trained personnel to use them is classified as an Extrication company.

    Signup and view all the flashcards

    Vehicle Accident with Injury

    A vehicle accident involving injuries requires a fire engine and a paramedic.

    Signup and view all the flashcards

    High-Risk Vehicle Accidents

    High-risk vehicle accidents include situations involving significant elevation changes, high speeds, multiple victims, or heavy vehicles.

    Signup and view all the flashcards

    Dispatching for Vehicle Accidents

    The dispatch center will send a specific set of resources depending on the type of vehicle accident reported.

    Signup and view all the flashcards

    Tunnel Rescue Response

    The process used for responding to incidents occurring below ground, involving specialized equipment and procedures.

    Signup and view all the flashcards

    Rescue Support Unit (RSU)

    A specialized unit equipped with tools, equipment, and absorbent materials for technical rescue incidents.

    Signup and view all the flashcards

    HazMat Incident Response Team

    A HazMat incident typically involves a response team with 3 engines, 2 ladder trucks, 1 rescue vehicle, 2 battalion chiefs, 1 medic, 1 EMS coordinator, air supply, a SO-2 unit, and a HazMat 4 unit.

    Signup and view all the flashcards

    What is the B#IC talkgroup used for?

    The B#IC talkgroup is used for critical communication on incidents, such as reporting arrival, adding or replacing units, relaying information between the Incident Commander and responding units, and communicating with the Fire Alarm Office.

    Signup and view all the flashcards

    What is the first step to establishing command at an incident?

    The Incident Commander designates the level of command needed for an incident, choosing between Fixed Command, Mobile Command, or Pass Command, based on the situation and available resources.

    Signup and view all the flashcards

    What is the role of a Branch Director?

    A Branch Director oversees a group of Divisions or Groups, implementing the relevant portion of the Incident Action Plan for their assigned Branch.

    Signup and view all the flashcards

    Study Notes

    • Vehicle Accidents
      • Vehicle accidents are classified as follows:
        • Vehicle Accident with Injury: 1 Engine, 1 Medic
        • Vehicle Accident with possible entrapment or High Risk: 1 Engine, 1 Extrication company, 1 Medic, 1 EMS Officer, 1 Rescue (CFD)
          • High-risk incidents may include: accidents involving elevation changes greater than 15 feet, high speeds, multiple victims, or heavy vehicles.
      • Extrication companies are any company equipped with and trained in extrication tools. These could include any apparatus type in the CAD (computer-aided dispatch).

    Ground/Below-Ground Incidents

    • Incidents above ground receive a standard response.
    • Incidents below ground receive a Tunnel Rescue response.

    Incident Resources

    • 1089 Olentangy River Rd & 287 Spruce St. incidents:
      • 1 Engine (E)
      • 1 Ladder (L)
      • 3 Rescue (R) Units
      • 1 Medic (M)
      • 4 HazMat (E, M, R, HZ4, Decon 4) units
      • 1 Rescue Support Unit (RSU)
      • RS-10 resource
      • 1 EMS Officer (EMSO)
      • 1 Battalion Chief (BN)
      • SO2

    HazMat Incidents (Updated)

    • The standard assignment for a HazMat Incident will include:
      • 3 Engines
      • 2 Ladders
      • 1 Rescue
      • 2 Battalion Chiefs
      • 1 Medic
      • 1 EMS Coordinator
      • Air supply
      • SO-2
      • HazMat 4 (rescue, medic, HazMat)

    Ventilation and Fire Attack (Existing, unchanged)

    • Ventilation factors significantly impact fire growth and development.
      • Key factors affecting ventilation include wind speed and direction, other ventilation openings, and the progress of the fire attack.
    • Uncontrolled forcible entry can lead to firefighter or civilian injury, death, and unnecessary property loss.
    • The primary principle when performing ventilation is "vent with purpose" - always consider the effect of the intended action.
      • Coordinated ventilation at basement fires is critical. Ventilating the basement from above when a lower level ventilation opening exists creates a flow path to the upper opening and may result in a sudden increase in fire intensity.
    • Fire-related deaths or life-threatening injuries require notification of the Battalion Chief, regardless of the circumstances.
      • This includes vehicle fires and other situations where a Battalion Chief might not normally respond.
      • The Battalion Chief must request a Fire Investigator.
    • The only approved batteries for use are Duracell® Procell PC 1604 9-volt and Duracell® PC 1500 1.5-volt AA.
    • Members are limited to 60 minutes work time in water above 75°F.
    • Members are limited to 40 minutes in water between 40°F and 75°F.
    • Members are limited to 20 minutes in water below 40°F.
    • Double and single family residences, small apartment buildings, strip malls, and small mercantile occupancies are included.
      • Other occupancies not classified as high life hazard are also included.
    • High life hazard occupancies, including multi-family apartments, hospitals, hotels, nursing homes, big box stores, warehouses, large industrial/manufacturing facilities, industrial complexes, schools, and churches.
      • A Fire Alarm "B" will be sent on all water flow alarms.
    • Commercial and residential occupancies greater than six stories above ground.
    • A modified response based on potential limited resource availability is possible.
      • Initiated by the Fire Alarm Office with the approval of the Emergency Services Deputy Chief (ES-2).
      • Modified Alarm Response applies to all occupancy types.
      • Assignment may be modified by the Fire Alarm Office or first-due company officer based upon additional information.
    • Rescue: The primary concern on all fires in residences. If persons are reported trapped or it is a possibility, hose crews should be positioned to protect occupants and crews performing rescue.
    • Exposure Protection: Protecting exposures, both inside and outside the structure, is the next concern for the Incident Commander (IC).
    • Confinement: Containing the fire to a specific area or building is the next priority for the IC.
    • Extinguishment: Total extinguishment of the involved materials is the next priority for the IC.
    • Overhaul: Searching for hidden fire or rekindle possibilities is the next priority for the IC.
    • Ventilation and Salvage: These tasks can be addressed at any stage of the incident as needed by the IC, depending on current conditions.
    • Suppression devices are determined by the officer in charge.
      • If a basement fire is suspected, a Transitional Fire Attack should be attempted.
      • Firefighters should avoid working directly over the fire area before applying water.
    • Backup lines are to be in place as soon as possible after an interior attack is initiated.
    • Supply lines should be laid and charged whenever interior crews are expected to use more than 25% of the vehicle's water tank capacity.
      • 5” LDH supply lines are for residential fires.
      • 3” supply lines can be used for refilling the tank or maintaining a water supply for overhaul and mop-up.
    • Ground ladders are placed in service when any floor of the building is above ground level or when companies are working on the roof.
      • If no fire is visible from the exterior and basement exterior access is available, initiate the attack from the exterior.
      • If exterior basement access is uncontrolled, do not ventilate from above until "water on the fire" is announced.
      • If no fire is visible and no exterior basement access is available, initiate an interior attack from above using the closest access to the basement stairs, but avoid working above the involved area.
      • Opening or breaking basement windows should only be done for a transitional fire attack before "water on the fire" is announced.
      • If basement access cannot be obtained from an exterior position, consider using a cellar or piercing nozzle, or cutting through the wall, bandboard, or first floor to apply water from the exterior.
      • Operating on the floor above the fire before exterior water application to the basement should only happen in extreme situations when absolutely necessary.
      • If possible, maintain the transitional line at the vent opening, and prepare to place it back in service if needed while extending a second attack line to the fire's origin.
    • Fire alarm response requires (2) Engines, (1) Ladder, and (1) Chief.
      • Level I Staging (Nothing Showing): The Investigation Group will consist of (1) Engine and (1) Ladder. The second engine should stage at the fire department connection.
      • Level I Staging (Smoke or Fire Showing): If smoke or fire is discovered, Incident Command shall upgrade the assignment to a High-Rise Fire Assignment.
        • The Investigation Group shall form the Fire Attack Group on the floor below the fire.
        • The second engine shall report to the Fire Attack Group on the floor below the fire.
        • The second engine operator shall coordinate with the first engine operator about water supply and series pumping to the fire department connection.
      • Battalion: The crew shall report to the lobby with equipment and initiate Lobby Control. The Battalion Chief shall assume incident command.
    • Delta-P Hazards: Differential pressure (Delta-P) hazards occur when two bodies of water with different levels intersect (e.g., dam, sewer, culvert drain). These hazards are dangerous to rescuers.
    • Flood Water: Any area holding water not normally a water source (e.g., streets, parking lots, underpasses).
    • Moving Water: Water moving at more than 1 knot (1.15 mph or 1.85 km/hr).
    • Reach, Throw, Row, Go: Four water rescue steps with increasing risk to the rescuer.
    • Static Water: Non-moving bodies of water (e.g., ponds, lakes, reservoirs, floods).
    • Whenever three or more medic vehicles are assigned, the FAO will dispatch EMS-10.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    This quiz covers the parameters and alert criteria of GPS systems used in vehicles. It examines how data is gathered at regular intervals, including speed limits and idling times. Participants will explore the implications of these alerts on user behavior and vehicle tracking.

    More Like This

    GPS Technology
    6 questions

    GPS Technology

    HilariousInfinity avatar
    HilariousInfinity
    Gladys Mae West and GPS Technology
    5 questions
    GPS Technology Overview
    29 questions

    GPS Technology Overview

    IntelligentCarnelian2133 avatar
    IntelligentCarnelian2133
    Use Quizgecko on...
    Browser
    Browser