Gating Systems Quiz

It helps to feed the molten metal initially through the path of gating system to mold cavity and maintains the required rate of liquid metal flow.

The sprue is made using a tapered sprue pin in the cope and is connected at the bottom of the pouring basin.

The runner helps to feed molten metal without turbulence to the runner, which in turn reaches the mold cavity through the gate.

<p>The skim bob collects impurities from the molten metal and prevents them from reaching the mold cavity.</p> Signup and view all the answers

<p>It makes it easier for the ladle operator to direct the flow of molten metal from the crucible to the pouring basin and sprue.</p> Signup and view all the answers