32 Questions
What is the purpose of setting up a folder/file/document that everyone on your network can access?
To contribute to a common folder from different devices.
What is the first step in creating a peer-to-peer connection?
Creating a Physical Connection
Where can you find the 'Change Adapter Settings' option to set up the LAN connection?
In the Network and Sharing Center
What is the next step after creating a physical connection in the peer-to-peer connection setup?
LAN Connection Setting
Which option should be selected to configure the IP address in the LAN connection setup?
Internet protocol Version 4 (TCP/IPv4)
What should be done after selecting the 'Internet protocol Version 4 (TCP/IPv4)' option in the LAN connection setup?
Click on its 'Properties' button
What steps do you need to take to change the default sharing settings for network discovery and file sharing?
Turn on network discovery and turn on file and printer sharing
What should the workgroup setting be to start sharing between two computers?
The workgroup setting must be the same in both computers, and the computer names should be different.
How do you turn on drive sharing in your computer or laptop?
Right click on your drive, select Properties, select 'Sharing', click on 'Advanced Sharing', tick 'Share this folder', click on 'Permissions', tick 'Full control', and click on 'OK'.
What command do you use to change into the desktop directory in command prompt?
Use the command 'cd Desktop'
What are the network settings that need to be changed in all network profiles in the sharing setting window?
Turn on network discovery, turn on file and printer sharing, allow windows to manage homegroup connection, turn on sharing for anyone with network access, use 128-bit encryption, turn off password protected sharing
What command can you use to create a folder in the desktop directory?
Use the command to create a folder
What should be typed in the workgroup tab for both computers to start sharing?
Type 'WORKGROUP' in the workgroup tab for both computers
What are the steps to change the default workgroup setting?
Press Windows + Pause Break Key to open the system's properties window, click on 'Change setting' in workgroup settings, click on 'Change' in the 'Computer Name' tab, type 'WORKGROUP', click OK, click on 'Network ID', follow the manual setting, click on Finish, and restart both computers
What changes do you need to make in the drive's properties to turn on drive sharing?
Tick 'Share this folder', click on 'Permissions', tick 'Full control', and click on 'OK'
What does turning off password protected sharing do?
It allows sharing so anyone with network access can read and write files in the public folders
Where can you find the 'Change Adapter Settings' option to set up the LAN connection?
In the Network and Sharing Center option.
What is the purpose of setting up a folder/file/document that everyone on your network can access?
To contribute to a common folder from different devices.
What should be done after opening the 'Local Area Connection' or Ethernet Adaptor’s properties?
Select the 'Internet protocol Version 4 (TCP/IPv4)' option and then click on its 'Properties' button.
What steps do you need to take to change the default sharing settings for network discovery and file sharing?
Open Windows Control Panel, select 'Network and Sharing Center', and then click on 'Change Advanced Sharing Settings'.
What command can you use to create a folder in the desktop directory?
mkdir
What is the next step after creating a physical connection in the peer-to-peer connection setup?
Setting up the LAN connection by configuring the IP address.
What settings do you need to change in all network profiles in the sharing setting window?
Turn on network discovery, turn on file and printer sharing, allow windows to manage homegroup connection, turn on sharing so anyone with network access can read and write files in the public folders, use 128-bit encryption, turn off password protected sharing
What should be typed in the workgroup tab for both computers to start sharing?
WORKGROUP
What steps are involved in turning on drive sharing in your computer or laptop?
Right click on your drive and select Properties, select 'Sharing', click on 'Advanced Sharing', tick 'Share this folder', click on 'Permissions', tick on 'Full control', click on 'OK', then click on 'OK' again
What command can you use to change into the desktop directory in command prompt?
cd desktop
What should be done after creating a physical connection in the peer-to-peer connection setup?
Setting up the IP address manually and adding the gateway IP
Where can you find the 'Change Adapter Settings' option to set up the LAN connection?
In the Control Panel or Network and Sharing Center
What are the steps to change the default workgroup setting?
Press Windows + Pause Break Key to open system properties window, click on 'Change setting' in workgroup settings category, click on 'Change' in the 'Computer Name' tab, type 'WORKGROUP' in the workgroup tab, click OK, click on 'Network ID', and follow the manual setting
What is the purpose of setting up a folder/file/document that everyone on your network can access?
To allow easy sharing and access to files or documents across the network
What does turning off password protected sharing do?
Allows sharing without requiring passwords for access
What are the network settings that need to be changed in all network profiles in the sharing setting window?
Turn on network discovery, turn on file and printer sharing, allow windows to manage homegroup connection, turn on sharing so anyone with network access can read and write files in the public folders, use 128-bit encryption, turn off password protected sharing
Learn how to set up a shared folder for network access in this tutorial. Perfect for those who want to facilitate communication and file sharing within a network environment.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free