Fox 4E Towing Tractor: Operation and Controls

Play an AI-generated podcast conversation about this lesson

Where is the accelerator pedal located in the driver's area?

Above the steering wheel
On the left-hand side
In the middle
On the far-right-hand side (correct)

How does depressing the accelerator pedal affect the vehicle?

Turns on the engine
Decelerates the vehicle
Accelerates the vehicle (correct)
Has no effect

What is the purpose of the safety symbols in the manual?

To provide important safety messages (correct)
To display decorative images
To indicate maintenance schedules
To show where to refuel the vehicle

Why is it mentioned that all persons operating this vehicle would require prior authorization and training?

Due to legal regulations (C) Signup and view all the answers

How is the horn activated in the vehicle?

By twisting the lever on the turn indicator switch (A) Signup and view all the answers

What must be done to shift gears in the vehicle?

Ensure the ignition is on and the service brake is applied (A) Signup and view all the answers

How are the main beams (headlights) activated in the vehicle?

By pulling the indicator lever towards the steering wheel (A) Signup and view all the answers

What function does pulling the indicator lever towards the steering wheel serve?

Activating the main beams (headlights) (B) Signup and view all the answers

Where is the parking brake lever located in the vehicle?

Between the driver and passenger seats (A) Signup and view all the answers

What must be done before changing a vehicle's direction from forwards to reverse?

Apply the service brake and ensure the vehicle is at a dead stop (D) Signup and view all the answers

What is the purpose of leaving the pedal in idle position when starting the engine?

To ensure safe engine start (D) Signup and view all the answers

What do an increase in pressure on the brake pedal and a heavier application of service brakes result in?

Higher retardation of the tractor (B) Signup and view all the answers

How is brake fluid supplied to the brake calipers on both front and rear axles under normal operating conditions?

Through a vacuum-assisted master cylinder (A) Signup and view all the answers

What happens to the brake pedal if the engine or vacuum booster fails?

It needs more force from the operator to stop the vehicle (B) Signup and view all the answers

What function is controlled by the steering column stalk switch?

Turn indicators (D) Signup and view all the answers

What is recommended for both tractor performance and operator safety during towing operations?

Using the rear hitch point (D) Signup and view all the answers

What type of lights are located at the front and rear of the vehicle?

Flashing Turn Indicator Lamps (Amber) (C) Signup and view all the answers

What is facing the rear of the vehicle?

Horn and floodlights (C) Signup and view all the answers

What does the Dashboard EDM provide to the driver?

Battery usage and engine hours (C) Signup and view all the answers

Which component is NOT part of the Steering Column Stalk Switch?

Park brake lever (C) Signup and view all the answers

What should be done before operating the tractor, according to the text?

Check battery power availability (A) Signup and view all the answers

Which action is required during the EV startup process based on the text?

Turn on the isolator (D) Signup and view all the answers

What type of steering system does the tractor have, as per the text?

Assisted steering (C) Signup and view all the answers

During the EV shutdown, what gear should be selected first according to the text?

Neutral Gear (B) Signup and view all the answers

What should be reported immediately if identified during the pre-operational check?

Any visible damage or leaks around the tractor (D) Signup and view all the answers

Which step is NOT part of the EV startup process described in the text?

Connecting the battery to the charger (C) Signup and view all the answers