Fire Safety Systems and Procedures

Ensure main system valve(s) are closed

Use non-Firefighter's Service elevator to evacuate them

Assign one fully bunkered firefighter for each car operating in Firefighter’s Service mode (correct)

Direct them to congregate in the lobby

To increase the noise level in the building

To improve interior communications (correct)

To activate the fire pump

To initiate the evacuation process

Continue using the non-functioning pump

Advise command immediately (correct)

Activate the public address system

Close the main system valve(s)

<p>Only if the car serves the fire floor(s)</p> Signup and view all the answers

<p>Direct them to a safe area away from egress areas</p> Signup and view all the answers