40 Questions
Which of the following best describes how inspection area assignments are rotated?
Each platoon inspects each quadrant of the local alarm district once every four years.
What is the frequency of inspections for occupancies categorized as high hazard?
Inspected annually
Which of the following best describes the inspection frequency for occupancies categorized as low hazard?
Inspected every other year, based on the occupancy's address
Which of the following is responsible for inspecting residential apartment/condo buildings?
The Operations Bureau
When are building inspections conducted by the Operations Bureau?
Daily from March 1st through December 31st, excluding Sundays and holidays, from 0900 to 1700 hours
What should the company do if permission to inspect the premises is denied?
Leave the premises and notify the Battalion Fire Inspector assigned to the area for follow-up
Who is responsible for developing the Department's inspection program and training personnel on basic life safety inspection checks?
Fire Marshal
What type of occupancy includes restaurants, bars, taverns, and night clubs?
Group 'A' Assembly Occupancy
Which level of occupancy comprises professional or civic office buildings?
Group 'B' Business Occupancy
What height qualifies a building as a high-rise according to the text?
Above 75 feet
Which part of the Fire Department is responsible for initiating advanced enforcement actions for non-compliant properties?
Fire Inspectors
Who ensures that companies under their command perform inspections and meet guidelines provided by the Fire Marshal?
Operational Battalion Fire Chiefs
Which of the following responsibilities does the FPD Fire Inspector have?
All of the above
What is the responsibility of the platoons in the Station Local Alarm Area Example?
All of the above
What is the local alarm area for Engine Co. 1 according to the example?
K Street, NW to 18th Street, NW to Massachusetts Ave, NW to DuPont Circle to 21st Street, NW to 24th Street, NW to Wyoming Avenue, NW to Observatory Circle to 27th Street, NW to O Street, NW to M Street, NW to Key Bridge end at K Street, NW
According to the Fire Code Violation References, which violation code section covers 'Hazards to Firefighters'?
IFC 316
What does the Fire Code Violation References section state about 'Vertical shafts in buildings'?
Vertical shafts in buildings shall be properly marked and identified
What is the requirement for the Fire Alarm System in terms of trouble signals on the annunciator panel?
No visible trouble signals
What is the responsibility of the FPD Operations Captain?
To be the liaison between the FPD and the Operations Bureau for questions and communication on the Fire Prevention Inspection Program
What is the correct maintenance schedule for the Kitchen Hood Suppression system?
Bi-annual servicing
What is the purpose of an OS&Y Valve in a Fire-Sprinkler System?
To control water flow into the system
What is the significance of the Knox Box mentioned in the text?
Houses spare keys for building access
What does IFC 1008.1.9.3 specifically address regarding building exits?
Proper exit door signage installation
According to the IFC regulations, what should be maintained at least 18 inches below all fire sprinklers?
Storage items
How often should kitchen suppression systems be inspected and serviced?
Every six months
What is the general guideline for the maximum distance to a fire extinguisher in a building?
Within 75 feet of all areas
What is the minimum required clearance space around electrical portable heaters?
36 inches
What is the minimum required clearance space around gas-fired heat-producing appliances?
3 feet
What is the required clearance in front of electrical panels?
30 inches
Which of the following is NOT allowed for permanent wiring?
Extension cords
Where should oily rags or similar materials be stored?
In approved metal containers
What is the requirement for combustible materials in the means of egress?
Combustible materials should not be stored in any portion of the means of egress
Which of the following is NOT required for electrical receptacles?
Exposed electrical wiring is allowed
What is the requirement for the use of extension cords?
Extension cords should not be used as permanent wiring, except for temporary power
What is the purpose of the Fire Prevention Inspection Guidelines outlined in the text?
To establish policies and procedures for building inspections by the Fire Prevention Division and Operations Bureau members
What is the purpose of dividing the company inspection routes into districts?
To distribute the inspection workload as equitably as possible among the companies
What is the primary reference document cited in the text for the Fire Prevention Inspection Guidelines?
The Fire Code Supplement (12-H-DCMR) of the District of Columbia Construction Codes Supplement
What is the responsibility of the Captains of Engine companies?
Both a and b
What is the significance of the boundary lines for the company inspection districts?
The boundary lines shall run along the centerline of the roadway, unless otherwise stated
What is the purpose of the ESO system mentioned in the text?
To provide a list of all buildings in the District, identified by the NFIRS property use code, Engine Company Local Alarm Area, and Battalion
Test your knowledge of fire prevention inspection guidelines outlined in Article XVIII-A regarding building inspections, references, and policies. Topics include Fire Code Supplement, International Fire Code, and Bulletin 101 - ESO RMS System Guidelines.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
