202-01 Daily Inspection of the Engine Company Apparatus

Play an AI-generated podcast conversation about this lesson

Which fluids should be checked for leaks during the 360-degree inspection of the apparatus?

Transmission fluid and coolant

Water and coolant

Brake fluid and water

Oil and brake fluid (correct)

How often should the chassis springs be checked for damage?

Every year

Every month

Every day

Every week (correct)

What should be checked for leaks or cracks on a weekly basis?

Chassis springs

Mufflers and exhaust pipes (correct)

Shock absorbers

Apparatus body

What should be done if loose ladders, hooks, or equipment are found attached to the apparatus?

Secure them Signup and view all the answers

How often should the apparatus body be checked for loose or missing fasteners?

Every week Signup and view all the answers

What should be checked on the cab doors during the inspection?

Hinges, handles, glass, and window regulators Signup and view all the answers

Which department strives to give all members the knowledge and tools to better serve themselves and the citizens of the City?

Philadelphia Fire Department Signup and view all the answers

What must be in the best condition possible to be able to carry out the mission of the department?

Fire apparatus Signup and view all the answers

Which types of pumping apparatus are in service within the Philadelphia Fire Department?

American LaFrance, KME, and Spartan Signup and view all the answers

Who is responsible for the condition and operation of the apparatus?

The driver Signup and view all the answers

When should the apparatus/equipment inspection be performed?

At the start of each shift Signup and view all the answers

Why should the apparatus be washed and waxed as needed?

To maintain a clean appearance Signup and view all the answers

Which of the following is a sign that indicates the need for brake service?

The apparatus pulls to the left or right when the brake is applied Signup and view all the answers

How often should the adjustment of the parking brake be checked?

Weekly Signup and view all the answers

What should the driver do at the start of each shift in relation to the pump?

Engage the pump and check the tank water level Signup and view all the answers

What is the recommended setting for the intake relief valve?

Highest setting Signup and view all the answers

What should be done after a pump service involving water from anywhere but the domestic water system?

Flush the pump thoroughly with clean water Signup and view all the answers

How often should the pump be flushed out?

Monthly Signup and view all the answers

What should be done if the large suction hoses are missing rubber rings and gaskets?

Replace the large suction hoses Signup and view all the answers

What should be done to prevent valves from becoming frozen from rust and sediment?

Physically operate all pump controls for proper operation Signup and view all the answers