Podcast
Questions and Answers
What is the maximum distance allowed below the endpoints of the roll hoop for any part of the primary structure in the mentioned plane?
What is the maximum distance allowed below the endpoints of the roll hoop for any part of the primary structure in the mentioned plane?
- Exactly 30 mm
- Around 50 mm
- Less than 30 mm (correct)
- Greater than 50 mm
When roll hoops are attached to a composite primary structure, where must the lower roll hoop tubing attachment points be located?
When roll hoops are attached to a composite primary structure, where must the lower roll hoop tubing attachment points be located?
- Within 40 mm of the endpoints of the roll hoop
- Beyond 50 mm of the endpoints of the roll hoop
- Within 50 mm of the endpoints of the roll hoop (correct)
- Within 30 mm of the endpoints of the roll hoop
What is the minimum thickness required for mounting plates welded to the roll hoops, based on the roll hoop material?
What is the minimum thickness required for mounting plates welded to the roll hoops, based on the roll hoop material?
- 1 mm thick steel or aluminum
- 3 mm thick steel or 4 mm thick aluminum
- 4 mm thick steel or 2 mm thick aluminum
- 2 mm thick steel or 3 mm thick aluminum (correct)
What is a requirement related to the construction of the main hoop according to T3.8.1?
What is a requirement related to the construction of the main hoop according to T3.8.1?
In the side view, what is the maximum inclination allowed for the portion of the main hoop above its upper attachment point to the side impact structure?
In the side view, what is the maximum inclination allowed for the portion of the main hoop above its upper attachment point to the side impact structure?
According to the rules, what is the maximum allowable rearward inclination of any portion lower than the upper attachment point to the side impact structure in the side view?
According to the rules, what is the maximum allowable rearward inclination of any portion lower than the upper attachment point to the side impact structure in the side view?
Which of the following statements about the front hoop is true?
Which of the following statements about the front hoop is true?
According to the rules, what is the minimum included angle formed by the main hoop and the main hoop braces?
According to the rules, what is the minimum included angle formed by the main hoop and the main hoop braces?
Which of the following statements about the main hoop bracing is false?
Which of the following statements about the main hoop bracing is false?
According to the rules, what is required for fully laminating the front hoop to the monocoque?
According to the rules, what is required for fully laminating the front hoop to the monocoque?
