Fasteners, Tools and Calculations Quiz
6 Questions
0 Views

Fasteners, Tools and Calculations Quiz

Created by
@LuxuryMiracle2524

Podcast Beta

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which fastener is appropriate for mounting a thermostat to a standard 2x4?

  • Nails
  • Wood Screws (correct)
  • Plastic Anchors
  • Self-tapping Screws
  • What is the best method to secure a plastic drain tube to the drain outlet of a furnace?

  • Screw Fasteners
  • Zip Ties
  • Hose Clamp, Gear Clamp (correct)
  • Electrical Tape
  • What device is used to fasten wires together in electrical installations?

  • Twist Tie
  • Marrette or wire nut (correct)
  • Solder
  • Duct Tape
  • To fasten plates of steel together, which hardware should be used?

    <p>Bolts, Nuts</p> Signup and view all the answers

    What is the method used for joining ductwork efficiently?

    <p>S Cleat, Drive Cleat</p> Signup and view all the answers

    What is the calculated volume of a room measuring 15 feet by 40 feet by 8 feet?

    <p>4800</p> Signup and view all the answers

    Study Notes

    Fasteners and Tools

    • Wood screws are used to mount thermostats to 2x4s.
    • Hose clamps or gear clamps are used to fasten plastic drain tubes to furnace drain outlets.
    • Marrettes or wire nuts are used to fasten two wires together.
    • Bolts and nuts are used to fasten plates of steel together.
    • S cleats or drive cleats are used to join ductwork together.
    • Wire strippers are used to remove the plastic sheathing on wire.
    • Shot for powder-actuated tools should be stored in a dry, secure location.
    • Coring bits and masonry bits are used for driving concrete.

    Calculations

    • The volume of a room is calculated by multiplying length, width, and height.
    • A room measuring 15' x 40' x 8' has a volume of 4800 cubic feet.
    • One PSI (pound per square inch) is equal to 28 inches of water column.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Test your knowledge on fasteners and tools used in construction as well as learn about essential calculations related to room dimensions and pressure measurements. This quiz covers the uses of wood screws, clamps, nuts, and bolts, alongside volume and PSI conversions. Master these fundamental concepts to enhance your practical skills in building and construction.

    More Like This

    Tools and Fasteners Quiz
    3 questions
    Fasteners Overview and Applications
    20 questions
    Ceramic Tiles and Fasteners Quiz
    40 questions
    Use Quizgecko on...
    Browser
    Browser