FAA General Flashcards
20 Questions
100 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Where is the record of compliance with Airworthiness Directives or manufacturers' service bulletins normally indicated?

Aircraft maintenance records.

If work performed on an aircraft has been done satisfactorily, what does the signature of an authorized person on the maintenance records constitute?

Approval for return to service only for the work performed.

During an annual inspection, what must the person disapproving do if a defect is found that makes the aircraft unairworthy?

Provide a written notice of the defect to the owner.

What is the means by which the FAA notifies aircraft owners and other interested persons of unsafe conditions?

<p>Airworthiness Directives.</p> Signup and view all the answers

Which is an example of an appliance major repair?

<p>Overhaul of a hydraulic pressure pump.</p> Signup and view all the answers

Where should you find the entry regarding the removal and repair of a right wing and buckled spar?

<p>FAA Form 337.</p> Signup and view all the answers

Which maintenance action is considered an airframe major repair?

<p>The repair of portions of skin sheets by making additional seams.</p> Signup and view all the answers

What is the best description of the replacement of several damaged heli-coils in a casting?

<p>Eight 1/4-20 inch standard heli-coils were replaced.</p> Signup and view all the answers

Which maintenance record entry best describes the action taken for a control cable showing approximately 20 percent wear?

<p>Wear within acceptable limits, repair not necessary.</p> Signup and view all the answers

What is the best description of the action taken for a .125-inch deep dent in 1/2-inch aluminum alloy tubing?

<p>Dented section removed and replaced with identical new tubing flared to 37 degrees.</p> Signup and view all the answers

Which statement is true regarding the requirements for maintenance record format?

<p>Any format that provides record continuity and includes the required information may be used.</p> Signup and view all the answers

Where is the entry for a 100-hour inspection recorded if separate maintenance records for the airframe and powerplant are maintained?

<p>In each record.</p> Signup and view all the answers

For aircraft operated under part 91, when is total aircraft time required to be recorded in maintenance records?

<p>After satisfactorily completing inspections.</p> Signup and view all the answers

What is the difference between the record entry requirements for maintenance and inspections for aircraft operated under part 91?

<p>Aircraft total time is required to be included only in the inspection entry.</p> Signup and view all the answers

If more space is needed for a work description on FAA Form 337, what additional information should be included?

<p>Aircraft nationality and registration mark, and the date the work was accomplished.</p> Signup and view all the answers

What type of statement must document the records of a product, part, or appliance installed on a type certificated product?

<p>The product, part, or material meets FAA airworthiness standards.</p> Signup and view all the answers

Which aircraft record entry best describes a repair of a dent in a tubular steel structure?

<p>Welded a reinforcing plate over the dented area.</p> Signup and view all the answers

Who is responsible for making the entry in the maintenance records after an annual, 100-hour, or progressive inspection?

<p>The person approving or disapproving for return to service.</p> Signup and view all the answers

For aircraft operated under part 91, which records must be retained for at least one year?

<p>Records of maintenance, alterations, preventive maintenance, 100-hour, annual, and progressive inspections.</p> Signup and view all the answers

What does a certificated mechanic without an inspection authorization do when signing FAA Form 337?

<p>Certifying that the work was done in accordance with FAA regulations.</p> Signup and view all the answers

Study Notes

Aircraft Maintenance Records

  • Compliance with Airworthiness Directives or service bulletins is recorded in aircraft maintenance records.
  • A signature by an authorized person in maintenance records indicates approval for return to service only for the specific work performed.

Defect Reporting

  • During annual inspections, if an unairworthy defect is found, a written notice must be provided to the aircraft owner.

Airworthiness Directives

  • The FAA uses Airworthiness Directives to notify aircraft owners of unsafe conditions and to prescribe conditions for continued operation.

Major Repairs

  • An overhaul of a hydraulic pressure pump qualifies as a major repair for appliances.
  • Airframe major repairs include the repair of skin sheet portions by adding seams.

FAA Form 337

  • Specific maintenance actions, such as removing a right wing and repairing a spar, should be documented on FAA Form 337.

Maintenance Record Entries

  • For replacing damaged heli-coils, an entry should detail the extraction process and installation of new inserts.
  • If a control cable shows 20% wear on outer wires, the maintenance entry should state that repair is not necessary due to acceptable wear limits.
  • A .125-inch deep dent in aluminum tubing should be documented as replaced with identical new tubing flared to 37 degrees.

Record Format Requirements

  • There are no prescribed formats for maintenance records; any format ensuring continuity and inclusion of required information is acceptable.

Inspection Records

  • Upon completing a 100-hour inspection, the entry must be recorded in the separate records for the airframe, powerplant(s), and propeller(s).
  • For aircraft operating under part 91, total time is recorded in maintenance records only after satisfactory completion of inspections.

Work Description on FAA Form 337

  • If additional space is needed for work descriptions on FAA Form 337, include aircraft nationality, registration mark, and the date of completion on attached sheets.

Installation Documentation

  • When installing certified products or parts, it’s essential to document that they meet FAA airworthiness standards.

Responsibilities and Record Retention

  • The person conducting the annual, 100-hour, or progressive inspection is responsible for making the entry in maintenance records.
  • For part 91 operations, maintenance, alterations, preventive maintenance, and inspection records must be retained for at least one year, or until superseded.

Certifications

  • A certificated mechanic without inspection authorization who signs FAA Form 337 is certifying compliance with the appropriate work standards.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Quiz Team

Description

Test your knowledge on FAA regulations with these general flashcards. This quiz covers key concepts about aircraft maintenance, compliance records, and service approvals. Perfect for aviation students and professionals looking to refresh their understanding of FAA guidelines.

Use Quizgecko on...
Browser
Browser