Podcast
Questions and Answers
For hot work operation with citywide permit, the owner of the premises of the hot work operation areas must be notified in writing by the citywide permit holder ______ the hot work is to be started.
For hot work operation with citywide permit, the owner of the premises of the hot work operation areas must be notified in writing by the citywide permit holder ______ the hot work is to be started.
at least 48 hours before
The pre-hot work check must be conducted by the responsible person before hot work is authorized and __________.
The pre-hot work check must be conducted by the responsible person before hot work is authorized and __________.
at least once per day
The check reports must be kept at the work site during the work, made available for inspection by a representative of the FDNY, and maintained on the premises for a minimum of __________.
The check reports must be kept at the work site during the work, made available for inspection by a representative of the FDNY, and maintained on the premises for a minimum of __________.
48 hours after work is complete
A pre-hot work check must be conducted at least __________.
A pre-hot work check must be conducted at least __________.
Signup and view all the answers
Hot work operations involving cutting or welding shall be conducted at least __________ from combustible materials and combustible waste.
Hot work operations involving cutting or welding shall be conducted at least __________ from combustible materials and combustible waste.
Signup and view all the answers
All other hot work operations shall be conducted at least __________ from combustible materials and combustible waste.
All other hot work operations shall be conducted at least __________ from combustible materials and combustible waste.
Signup and view all the answers
Sprinkler system protection ____________ while hot work is performed.
Sprinkler system protection ____________ while hot work is performed.
Signup and view all the answers
When should a fire watch be maintained?
When should a fire watch be maintained?
Signup and view all the answers
What other duties should the fire watch have while on hot work operations?
What other duties should the fire watch have while on hot work operations?
Signup and view all the answers
Where hose lines are required, they shall be connected, charged and ready for operation.
Where hose lines are required, they shall be connected, charged and ready for operation.
Signup and view all the answers
How far away should one fire extinguisher be from any operation?
How far away should one fire extinguisher be from any operation?
Signup and view all the answers
The fire watch for torch operations conducted at the following three locations shall be conducted by at least one F-60 fire guard.
The fire watch for torch operations conducted at the following three locations shall be conducted by at least one F-60 fire guard.
Signup and view all the answers
At least one multi-purpose portable fire extinguisher with a minimum ______________ for roofing operations utilizing heat-producing systems or other ignition sources.
At least one multi-purpose portable fire extinguisher with a minimum ______________ for roofing operations utilizing heat-producing systems or other ignition sources.
Signup and view all the answers
For any CNG or LPG torch operation, when should the first inspection be conducted?
For any CNG or LPG torch operation, when should the first inspection be conducted?
Signup and view all the answers
Who must the signed inspection report (or log book) be submitted to and retained by?
Who must the signed inspection report (or log book) be submitted to and retained by?
Signup and view all the answers
Fire watch for impairment must be provided when?
Fire watch for impairment must be provided when?
Signup and view all the answers
When is the fire extinguisher allowed to be put on the ground?
When is the fire extinguisher allowed to be put on the ground?
Signup and view all the answers
What way do you not approach a fire?
What way do you not approach a fire?
Signup and view all the answers
The dry chemical stream must be directed toward the point where the flame begins, where do you not put the chemical stream?
The dry chemical stream must be directed toward the point where the flame begins, where do you not put the chemical stream?
Signup and view all the answers
What do you do for piped gas?
What do you do for piped gas?
Signup and view all the answers
What do you never attempt to do with gas supply?
What do you never attempt to do with gas supply?
Signup and view all the answers
What do you do when it’s not possible to shut off the gas supply?
What do you do when it’s not possible to shut off the gas supply?
Signup and view all the answers
Class A Fire consists of what materials?
Class A Fire consists of what materials?
Signup and view all the answers
Class B fire includes which materials?
Class B fire includes which materials?
Signup and view all the answers
Class C fire extinguishers may be used on what?
Class C fire extinguishers may be used on what?
Signup and view all the answers
Class D fire involves which materials?
Class D fire involves which materials?
Signup and view all the answers
Study Notes
Hot Work Operations Protocols
- Notify the premises owner at least 48 hours before starting hot work operations with a citywide permit.
- Pre-hot work checks must be conducted at least once daily by the responsible person before work is authorized.
- Check reports must be available on-site during the work and retained for a minimum of 48 hours after completion.
Safety Distances
- Cutting or welding operations should occur at least 35 feet from combustible materials and waste.
- Other hot work operations must be conducted at least 25 feet from combustible materials and waste.
Sprinkler Systems and Fire Watch
- Sprinkler systems must remain operational during hot work.
- A fire watch is mandatory during any hot work operation, with personnel dedicated solely to this task.
Fire Extinguisher Requirements
- At least one portable fire extinguisher rating minimum 2-A:20-B:C must be available where hose lines are required.
- Fire extinguishers should be within 30 feet of any hot work operation.
- For roofing operations with heat-producing systems, a multi-purpose portable fire extinguisher with a minimum of 3-A:40-B:C is required.
Inspections and Reporting
- For CNG or LPG torch operations, first inspections must occur 30 minutes after completion, followed by another one hour later.
- Fire guards must complete a signed inspection report to be submitted to the person overseeing torch operations.
Fire Safety Procedures
- Fire watch personnel must be present when the alarm system is offline due to impairment.
- Fire extinguishers should never be placed on the ground.
- Approach fires from upwind for safety, avoiding downwind direction.
Fire Fighting Techniques
- Direct dry chemical streams toward the base of the flame, not at the center of the fire.
- For piped gas emergencies, shut off the gas supply first, then call emergency services.
- Never attempt to extinguish flames unless the gas supply has been successfully shut off.
Classifications of Fires
- Class A Fires: Involves wood, cloth, and trash.
- Class B Fires: Involves flammable liquids like gasoline and oil.
- Class C Fires: Suitable for use on live electric fires without risk to the operator.
- Class D Fires: Involves combustible metals and metal alloys.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Prepare for the F60 Fireguard test with these flashcards. Each card covers important safety regulations and procedures related to hot work operations. Use this resource to enhance your understanding and ensure compliance with citywide permit requirements.
