F-60 Fire Guard Study Material
95 Questions
100 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is G-60?

  • A fire safety code
  • A type of fire extinguishing system
  • A certificate for fire safety
  • Use of oxygen and flammable gases for any hot work (correct)

    • What are torch operations for jewelry referred to as?

    COF exception

    What type of permit is required for storing, using, or handling oxygen and flammable gas in excess of 400 SCF?

    FDNY permit

    What is the maximum capacity for portable LPG containers?

    <p>16.4 oz</p> Signup and view all the answers

    What is the maximum capacity for portable CNG containers?

    <p>8.7 SCF</p> Signup and view all the answers

    What is the maximum weight for single standard portable LPG containers?

    <p>100 LBs</p> Signup and view all the answers

    What is the maximum capacity for single CNG containers?

    <p>381 SCF</p> Signup and view all the answers

    What is approximately 400 SCF of LPG in pounds?

    <p>47 lbs</p> Signup and view all the answers

    What are the types of FDNY permits?

    <p>All of the above</p> Signup and view all the answers

    What can site specific permits be?

    <p>Permanent or temporary</p> Signup and view all the answers

    How long are permanent permits valid?

    <p>12 months</p> Signup and view all the answers

    How long might temporary permits be valid?

    <p>One day to 12 months</p> Signup and view all the answers

    What is the duration for citywide permits?

    <p>30 days</p> Signup and view all the answers

    What is the maximum quantity of gasoline that can be stored?

    <p>5 gals</p> Signup and view all the answers

    What is the maximum quantity of flammable liquid that can be stored?

    <p>250 gals</p> Signup and view all the answers

    What is the maximum quantity for combustible liquids stored?

    <p>300 gals</p> Signup and view all the answers

    What characterizes a transportation permit?

    <p>FDNY approved inspected displayed on vehicle</p> Signup and view all the answers

    What is required for any project with hot work operations?

    <p>Hot work authorization</p> Signup and view all the answers

    Who must be available for inspection during and after the hot work?

    <p>Responsible person</p> Signup and view all the answers

    What does a fire guard do?

    <p>Maintains a fire watch</p> Signup and view all the answers

    What must a fire watch include?

    <p>All of the above</p> Signup and view all the answers

    How often must a pre-hot work check be conducted?

    <p>Once per day</p> Signup and view all the answers

    What should daily pre-hot work checks verify?

    <p>All of the above</p> Signup and view all the answers

    How long must fire watch continue after work is done?

    <p>30 minutes</p> Signup and view all the answers

    What is the inspection report availability period after work is completed?

    <p>48 hours</p> Signup and view all the answers

    What materials are oxygen cylinders typically made of?

    <p>Steel</p> Signup and view all the answers

    What is the temperature generated by oxy-propane torches?

    <p>1,500 degrees</p> Signup and view all the answers

    What is the temperature generated by acetylene?

    <p>3000 degrees</p> Signup and view all the answers

    What is the maximum temperature generated by oxy-acetylene?

    <p>6000 degrees</p> Signup and view all the answers

    What temperature is typically achieved by brazing and soldering?

    <p>840 degrees</p> Signup and view all the answers

    What is the pressure up to which oxy-fuel torches store oxygen?

    <p>2200 PSI</p> Signup and view all the answers

    What pressure is dangerous for acetylene fuel gas?

    <p>Above 15 psi</p> Signup and view all the answers

    What are applications and additions for gas torches?

    <p>For burning weeds, melting ice, applying tar/asphalt</p> Signup and view all the answers

    What is backfire?

    <p>Flame on torch goes out unexpectedly</p> Signup and view all the answers

    What is flashback?

    <p>Cutting or welding flame burns inside the torch</p> Signup and view all the answers

    What type of clothing should be avoided during hot work?

    <p>Frayed clothing</p> Signup and view all the answers

    What temperatures are dangerous for compression gas containers?

    <p>High temperatures 125 degrees</p> Signup and view all the answers

    What is the most important part of compressed gas systems?

    <p>Regulator</p> Signup and view all the answers

    What is a fire guard?

    <p>Trained person responsible for fire watch</p> Signup and view all the answers

    What is the purpose of a fire watch?

    <p>Surveillance of an area for fire hazards</p> Signup and view all the answers

    What operations are covered by hot work?

    <p>Cutting, welding, brazing, soldering, etc.</p> Signup and view all the answers

    What constitutes a hot work area?

    <p>Exposed areas to sparks or heat from hot work</p> Signup and view all the answers

    What does NFPA stand for?

    <p>National Fire Protection Association</p> Signup and view all the answers

    What is personal supervision in regards to hot work?

    <p>Supervision by the certificate holder on-site</p> Signup and view all the answers

    Who designates the responsible person for fire safety at a hot work site?

    <p>The owner of the premises</p> Signup and view all the answers

    What type of roofing systems are torch-applied?

    <p>Bituminous roofing systems</p> Signup and view all the answers

    What do oxygen-fuel gas torches consist of?

    <p>Pressurized fuel gas and oxygen containers</p> Signup and view all the answers

    What is the purpose of mixing oxygen and fuel gas in the torch?

    <p>To generate a flame</p> Signup and view all the answers

    What does oxygen do in combustion?

    <p>Intensifies the burning of the fuel gas</p> Signup and view all the answers

    How much higher is the temperature produced by oxy-propane compared to air-propane?

    <p>1,500 degrees</p> Signup and view all the answers

    Why is acetylene commonly used?

    <p>It creates the greatest amount of heat when burned</p> Signup and view all the answers

    Where are control valves located on gas containers?

    <p>Top of the container</p> Signup and view all the answers

    What do the valves on gas containers control?

    <p>Discharge of gas from the containers</p> Signup and view all the answers

    What feature do gas containers have for safety?

    <p>Protective cap or collar</p> Signup and view all the answers

    What should be done when cylinders are not in use?

    <p>Screw caps on over the valve</p> Signup and view all the answers

    At what pressure is oxygen stored in cylinders?

    <p>2200 psi</p> Signup and view all the answers

    What is the purpose of storing fuel gas at higher pressures?

    <p>To keep sufficient fuel available for operation</p> Signup and view all the answers

    What is dangerous when using fuel gas?

    <p>Using at pressures above 15 psi, especially for acetylene</p> Signup and view all the answers

    What does the regulator do in a gas system?

    <p>Ensures safe pressure range for fuel discharge</p> Signup and view all the answers

    What gases are mixed inside the torch?

    <p>Oxygen and fuel gases</p> Signup and view all the answers

    What does adjusting the valves control?

    <p>Shape and intensity of the flame</p> Signup and view all the answers

    What does welding involve?

    <p>Joining two or more pieces of metal together</p> Signup and view all the answers

    What do cutting processes involve?

    <p>Separating a piece of metal through intense heat</p> Signup and view all the answers

    What do both welding and cutting processes often include?

    <p>Oxygen and fuel gas</p> Signup and view all the answers

    What is the highest temperature generated by oxy-acetylene?

    <p>Up to 6,000 ºF</p> Signup and view all the answers

    Where must the Certificate of Fitness be kept?

    <p>Upon his or her person</p> Signup and view all the answers

    What should portable LPG containers not exceed for indoors storage?

    <p>16.4 oz</p> Signup and view all the answers

    Where must permits be made available for inspection?

    <p>Premises</p> Signup and view all the answers

    How long after work is complete must hot work permits be available for inspection?

    <p>48 hours</p> Signup and view all the answers

    What must the citywide permit holder do before starting operations?

    <p>Notify the owner in writing at least 48 hours prior</p> Signup and view all the answers

    When must pre-hot work checks be conducted?

    <p>Once per day</p> Signup and view all the answers

    For how long must fire watch be provided after work is complete?

    <p>30 minutes</p> Signup and view all the answers

    How far must hot work areas be kept from combustible material?

    <p>35 feet</p> Signup and view all the answers

    What are examples of combustible materials?

    <p>Paper, wood shavings, straw, and fabric</p> Signup and view all the answers

    What should be checked in the entire work area after hot work is completed?

    <p>Fires</p> Signup and view all the answers

    What is the minimum rating for a fire extinguisher that must be readily accessible?

    <p>2-A:20-B:C</p> Signup and view all the answers

    How far must a fire extinguisher be accessible from the hot work location?

    <p>30 feet</p> Signup and view all the answers

    What minimum rating must a fire extinguisher have for torch-applied roof systems?

    <p>3-A: 40-B:C</p> Signup and view all the answers

    What type of protection system must not be turned off during hot work?

    <p>Automatic sprinkler systems</p> Signup and view all the answers

    When must compressed gas containers be replaced?

    <p>When they are empty</p> Signup and view all the answers

    How should empty containers be handled?

    <p>Same manner as full ones</p> Signup and view all the answers

    How should compressed gas containers not be transported?

    <p>Rolled on its side or rim</p> Signup and view all the answers

    What are the required height restrictions for fire extinguishers?

    <p>Not more than 5 feet above the floor, nor less than 4 inches from the ground</p> Signup and view all the answers

    When should a COF holder consider extinguishing fires?

    <p>When they are limited in size</p> Signup and view all the answers

    What direction should one never approach a fire from?

    <p>Downwind direction</p> Signup and view all the answers

    Where should the chemical stream not be directed at a fire?

    <p>Center of the flame</p> Signup and view all the answers

    What should be done first in the case of piped gas emergencies?

    <p>Shut off the gas supply first</p> Signup and view all the answers

    What to do when it is not possible to shut off the gas supply?

    <p>Allow the flame to burn itself out and call 911</p> Signup and view all the answers

    What are Class A extinguishers used for?

    <p>Extinguishing ordinary combustibles</p> Signup and view all the answers

    What are Class B extinguishers used for?

    <p>Extinguishing flammable or combustible liquids</p> Signup and view all the answers

    What are Class C extinguishers used for?

    <p>Extinguishing electrical equipment</p> Signup and view all the answers

    What are Class D extinguishers used for?

    <p>Extinguishing ignitable metals</p> Signup and view all the answers

    How often are fire extinguishers required to be inspected?

    <p>Monthly</p> Signup and view all the answers

    How often must fire extinguishers be maintained by an FDNY approved company?

    <p>Once per year</p> Signup and view all the answers

    Where should fire watch for torch operations be conducted?

    <p>All of the above</p> Signup and view all the answers

    Study Notes

    G-60 and F-60 Fire Guard Overview

    • G-60 pertains to hot work operations using oxygen and flammable gases like LPG or CNG.
    • Exceptions include COF for torch operations in jewelry.

    FDNY Permits and Regulations

    • A FDNY permit is required when storing, using, or handling more than 400 scf of oxygen or flammable gases and over 504 scf of oxidizing gas.
    • Types of permits include site-specific, citywide, and transportation permits.
    • Site-specific permits can be permanent or temporary, valid for up to 12 months.
    • Citywide permits last 30 days; temporary permits range from one day to 12 months, depending on operations.

    Hazardous Material Storage

    • Maximum storage quantities for hazardous materials are 5 gallons of gasoline, 250 gallons of flammable liquids, and 300 gallons of combustible liquids.

    Hot Work and Fire Watch Procedures

    • Hot work requires pre-hot work checks conducted daily by a responsible person.
    • A fire watch must be maintained before, during, and for 30 minutes after hot work.
    • Fire extinguishers must be accessible within 30 feet of the hot work area and must meet minimum rating requirements (2-A:20-B:C, 3-A:40-B:C for roofing).

    Equipment and Safety Protocols

    • Oxygen cylinders are made of steel and store oxygen at pressures up to 2200 PSI.
    • Oxy-acetylene torches can reach temperatures up to 6000 degrees Fahrenheit; oxy-propane torches reach about 1500 degrees Fahrenheit.
    • hazardous conditions include frayed clothing, which is more susceptible to ignition.

    Emergency and Fire Extinguishing Procedures

    • Classes of fire extinguishers are classified as A, B, C, and D for ordinary combustibles, flammable liquids, electrical equipment, and ignitable metals, respectively.
    • Fire extinguishers must be inspected monthly and maintained by an FDNY-approved company annually.
    • In case of a gas leak, shut off the gas supply before calling 911, or allow the flame to burn out if it’s unsafe to shut the supply.

    Responsibilities of Personnel

    • The responsible person must be available for inspection by fire department representatives for 48 hours after completion of the work.
    • Fire guards are trained personnel who maintain fire watch during hot work operations and ensure safety protocols are followed.
    • A COF holder must keep the Certificate of Fitness on their person or readily available for inspection.

    Inspection and Maintenance

    • Inspections of CNG or LPG torch operations are conducted 30 minutes and one hour after completion.
    • The inspection report must be available for fire department representatives within 48 hours after work is complete.

    Studying That Suits You

    Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

    Quiz Team

    Description

    Explore essential definitions and concepts related to the F-60 Fire Guard certification. This study material will help candidates understand critical terms like G-60, COF exceptions, and FDNY permits related to hot work involving flammable gases. Prepare effectively for your examination with these comprehensive flashcards.

    More Like This

    CAPR 60-1 Flashcards
    35 questions

    CAPR 60-1 Flashcards

    PatriLavender avatar
    PatriLavender
    CAPP 60-33 Flashcards
    100 questions

    CAPP 60-33 Quiz & Flashcards for Effective Learning

    SharperEducation9982 avatar
    SharperEducation9982
    F-60 Fire Guard Flashcards
    29 questions

    F-60 Fire Guard Flashcards

    KeenMaxwell9176 avatar
    KeenMaxwell9176
    III-E-60 National Fire Incident Reporting System 09/01/2022
    73 questions

    III-E-60 National Fire Incident Reporting System 09/01/2022

    AuthoritativeProse avatar
    AuthoritativeProse
    Use Quizgecko on...
    Browser
    Open
    Browser
    Browser