Driving Permit Tests #2 Flashcards

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Locked wheel skids are usually caused by:

Weather conditions

Driving at low speeds

Steering too sharply

Braking too hard at high speed (correct)

A driver entering a traffic circle or rotary must yield the right-of-way to:

No one

Pedestrians

Drivers already in the circle

Both A and B (correct)

When there is not enough room for a U-turn, you are suggested to follow:

A three point turn

A single solid white line across a road at an intersection means that a motorist must ______ for a traffic signal or sign.

stop behind the line Signup and view all the answers

If you are making a left turn, you must begin:

In the leftmost lane Signup and view all the answers

Flag persons are often located in highways and work zones to:

stop, slow or guide traffic safely through construction areas. Signup and view all the answers

When you approach a flashing yellow light at an intersection, you must?

Slow down and proceed with caution. Signup and view all the answers

A steady yellow traffic light at an intersection indicates that drivers need:

To stop unless they are already in the intersection. Signup and view all the answers

A center lane between lanes of traffic traveling in opposite directions may be designated for:

Left turns only Signup and view all the answers

When you reach a marked or unmarked crossing you must yield and watch for:

Pedestrians Signup and view all the answers

Which of the following should be done before entering the curve, in order to avoid a skid while driving?

Reduce the speed by applying brakes Signup and view all the answers

You must stop the vehicle by colliding head-on into a solid object when brakes fail while driving.

False Signup and view all the answers

When two or more lanes of travel are permitted in the same direction, a broken white line is used:

To divide each side of the highway into separate lanes for vehicles traveling in the same direction. Signup and view all the answers

When you find both a solid and a dashed yellow line between opposing lanes of traffic, you must not pass if the solid yellow line is on your side.

True Signup and view all the answers

A driver may pass on the right of another vehicle when the motor vehicle ahead is:

making or about to make a left turn. Signup and view all the answers

Which of the following right of way rules are NOT true?

At an intersection with no stop sign, yield sign, or traffic signal, drivers must yield to vehicles coming from the left. Signup and view all the answers

You may not pass another vehicle except under the following condition:

Your lane is separated by a broken yellow line. Signup and view all the answers

A yellow flashing light used mostly on tow trucks and slow moving vehicles requires other drivers to:

Slow down their vehicle. Signup and view all the answers

What is used as left edge lines on divided highways?

Single, solid, yellow lines Signup and view all the answers

When you drive in city traffic, you should try to look at least:

One block ahead Signup and view all the answers

When passing another vehicle, get through the other driver's blind spot as quickly as you can without exceeding the speed limit.

True Signup and view all the answers

The best way to handle a curve is to:

Slow down before entering a curve. Signup and view all the answers

Study Notes

Driving Permit Test Study Notes

Locked wheel skids typically occur due to excessively hard braking at high speeds.
When entering a traffic circle or rotary, yield the right-of-way to pedestrians and vehicles already in the circle.
If space is inadequate for a U-turn, opt for a three-point turn instead.
A single solid white line at an intersection indicates that a driver must stop behind the line for signals or signs.
For left turns, begin in the leftmost lane to ensure safety and compliance with traffic rules.
Flag persons in highway work zones direct traffic to facilitate safe passage through construction areas.
A flashing yellow light at an intersection signals for drivers to slow down and proceed with caution.
A steady yellow traffic light warns drivers to prepare to stop, unless already in the intersection.
A center lane designated for traffic in opposite directions is reserved for left turns only.
At marked or unmarked crossings, drivers must yield to pedestrians and remain vigilant.
To prevent skidding while navigating a curve, reduce speed by applying brakes beforehand.
In case of brake failure, avoid stopping the vehicle by colliding head-on with a solid object.
A broken white line indicates lanes of travel moving in the same direction, separating each lane for vehicles.
When encountering both solid and dashed yellow lines, do not pass if the solid line is on your side.
It is permissible to pass on the right when the vehicle ahead is turning left.
Right-of-way rules include several exceptions, such as yielding to pedestrians with guide dogs and obeying law enforcement signals.
Passing another vehicle is only allowed when the lane is separated by a broken yellow line.
A yellow flashing light primarily on tow trucks and slow-moving vehicles instructs other drivers to slow down.
Single solid yellow lines are used as left edge lines on divided highways.
In city traffic, maintain awareness by looking at least one block ahead.
When passing another vehicle, quickly move through the other driver's blind spot without exceeding the speed limit for safety.
The best approach to maneuvering a curve is to slow down prior to entering it for better control.

Studying That Suits You

Use AI to generate personalized quizzes and flashcards to suit your learning preferences.

Description

Test your knowledge of driving rules and safety with these flashcards designed for driving permit tests. Each card covers essential regulations and tips for safe driving practices. Perfect for anyone preparing for their driving exam!