Driver's Safety and Regulations Quiz

Road Signs and Signals

• Ruts in the road surface ahead signal potential hazards; caution advised.
• Winding road ahead requires reduced speed and increased awareness of curves.
• Bump or rough road ahead warnings suggest significant surface irregularities.

Vehicle Lighting Regulations

• High beam lights must be switched to low beam when an oncoming vehicle is at least 150 meters away.

Large Vehicle Backing Procedures

• The guide for backing a large vehicle should have a clear view of the vehicle's path while maintaining visual contact.

Overweight Vehicle Permit Requirements

• An overweight permit is necessary if the vehicle exceeds 4.3 meters in width.

Warning Sign Interpretations

• A sharp right curve sign indicates a need to reduce speed and prepare for a tight turn.
• Signs may also indicate turning restrictions at intersections.

Tire and Wheel Maintenance Indicators

• Metal or paint flakes around disc wheel lug nuts may suggest possible wheel movement issues.

Speed and Road Conditions

• Failing to reduce speed according to road conditions can enlarge the danger zone around the vehicle.

Following Distance for Heavy Vehicles

• A minimum following distance of 4 seconds is suggested when driving a truck or heavy vehicle behind another vehicle.

Load Management in Trucks

• When holding suspended loads, baffle the load to reduce rollover risks and ensure safety during sharp turns.

Trip Inspection Reports

• A written trip inspection report must include the date of inspection, but it does not require the gross vehicle weight.

Factors Influencing Turn Initiation

• Determining when to initiate a turn depends on the driver’s seat location and the vehicle's articulation point and width.

Pre-Trip Vehicle Checks

• A pre-trip inspection should include checks for brakes, gear functionality, and emergency systems like four-way flashers.