Podcast Beta
Questions and Answers
What is a safe speed?
The safe speed is the one that allows you to have complete control of the vehicle and handle any emergency.
The safe speed is determined by which of the following factors? (Select all that apply)
Speed limits are the maximum speed you may travel _____ under ideal conditions.
under ideal conditions
What are the maximum speed limits in New Hampshire for a school zone?
Signup and view all the answers
What are the fines for speeding in a work zone?
Signup and view all the answers
Drivers who go far slower than the normal flow of traffic cause a great hazard. They often _______ or _______.
Signup and view all the answers
If you must travel at a slow speed, what should you do?
Signup and view all the answers
The minimum speed you may drive on an interstate highway is _______ unless conditions are unsafe.
Signup and view all the answers
When you double your speed, the stopping distance is nearly _______.
Signup and view all the answers
Risk of serious injury or death is 4 times as great _______ than at 30 MPH.
Signup and view all the answers
You _______ and _______ at high speeds.
Signup and view all the answers
Study Notes
Safe Speed and Control
- A safe speed is crucial for maintaining complete control over the vehicle and effectively managing emergencies.
Determinants of Safe Speed
- Road Conditions: Slippery or bumpy roads require reduced speed.
- Visibility: Low visibility due to darkness, rain, fog, or obstacles necessitates lower speeds.
- Traffic Conditions: Heavy traffic increases risks; maintaining flow is vital for safety.
- Relative Speed: Collisions often occur when there is a significant speed difference between vehicles.
- Vehicle Condition: A well-maintained vehicle contributes to safe driving.
- Driver Condition: Physical and mental state impacts driving performance.
Speed Limits
- Speed limits indicate the maximum permissible speed under ideal conditions.
New Hampshire Speed Limits
- School Zones: 10 MPH below the posted limit during specific school hours.
- Business/Urban Districts: 30 MPH limit.
- Rural Residence Districts: 35 MPH limit.
- Towing: 45 MPH when towing a house trailer.
- General Areas: 55 MPH in most locations, including non-posted interstate highways.
- Interstate Highways: 65 MPH in designated sections.
Work Zone Speeding Fines
- Speeding fines in work zones range from $250 to $500.
Effects of Slow Driving
- Driving significantly slower than the traffic flow can create hazards by blocking lanes and encouraging unsafe passing attempts.
Courteous Slower Driving
- Use the right lane to allow faster traffic to pass when driving slowly.
- Safely pull off the road when necessary to let other vehicles pass.
Minimum Speed on Interstate Highways
- The minimum allowable speed on interstates is 45 MPH, unless conditions make this unsafe.
Effects of Speed on Stopping Distance
- Doubling speed increases stopping distance by nearly four times.
Risk Assessment by Speed
- The likelihood of serious injury or death increases fourfold at 60 MPH compared to 30 MPH.
High-Speed Driving Consequences
- Higher speeds lead to increased fuel consumption and greater wear on the vehicle.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge of safe driving speeds with these flashcards from the Driver's Manual. You'll learn how to determine safe speeds based on various road conditions and visibility factors. Get ready to improve your understanding of road safety!