18 Questions
1 Views

# Digital Number Systems and Binary System Quiz

Created by
@ScenicDeciduousForest

1

2

2

### Analog signals can be converted to digital by taking measurements or 'samples' at regular ______

<p>intervals</p> Signup and view all the answers

### In binary representation, the appropriate time between samples depends on the maximum rate of change of the analog ______

<p>signal</p> Signup and view all the answers

### Digital Systems are designed based on the Binary system which uses ______ and 1 as symbols

<p>0</p> Signup and view all the answers

### Hexadecimal has 16 symbols and is a ______ numbering system.

<p>base</p> Signup and view all the answers

### In the decimal system, each number is a ______ (from Latin for finger).

<p>digit</p> Signup and view all the answers

### Binary is a ______ numbering system with 2 symbols.

<p>base</p> Signup and view all the answers

### Digital circuits are less affected by ______.

<p>noise</p> Signup and view all the answers

### More digital circuitry can be fabricated on IC ______.

<p>chips</p> Signup and view all the answers

### Representing Binary Quantities, air temperature is an ______ quantity.

<p>analog</p> Signup and view all the answers

### A higher range of voltages represent a valid ______.

<p>1</p> Signup and view all the answers

### HIGH and LOW are often used to describe the states of a digital system—instead of ______.

<p>1 and 0</p> Signup and view all the answers

### Two state devices: Light bulb (off or on) Diode (conducting or not conducting) Relay (energized or not energized) Transistor (cutoff or saturation) Photocell (illuminated or ______).

<p>dark</p> Signup and view all the answers

### The oscilloscope and logic analyzer are used to produce ______ diagrams.

<p>timing</p> Signup and view all the answers

### Representing Binary Quantities, a lower range of voltages represent a valid ______.

<p>0</p> Signup and view all the answers

## More Quizzes Like This

Use Quizgecko on...
Browser
Information:
Success:
Error: