Diesel Engine Pre-Start Procedures Quiz
29 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is a crucial pre-start procedure to carry out after overhauling a crosshead type diesel engine?

  • Close all air space drain cocks
  • Do not engaged turning gear
  • Closed starting air valves
  • Open starting air valves (correct)

What negative effect can occur from prolonged operation of a diesel engine at lower than normal designed operating temperature?

  • Increase power output
  • Eliminate fuel rack
  • Decrease lube oil viscosity
  • Cause sulfuric acid formation (correct)

Which behavior indicates a positive organizational culture according to the text?

  • Obedient and uncomplaining
  • Competitive and perfectionist
  • Proactive and caring with one another (correct)
  • Powerful and oppositional

If the relieving officer is not fit for the watch duties, what is the recommended course of action for the duty engineer officer?

<p>Do not hand over the watch and inform the Ch.Engineer for further instruction (B)</p> Signup and view all the answers

What immediate steps should be taken by the duty watch-keeping engineer in the event of a fire?

<p>Activate the emergency alarm and evacuate the area (B)</p> Signup and view all the answers

What could happen if the cooling water system of a diesel engine operates at below the normal designed temperature for a prolonged period?

<p>Damage the working parts (C)</p> Signup and view all the answers

Who can demand the engine log book for inspection?

<p>Port State Authority, Class, Insurance surveyors, and Owner’s technical superintendents (C)</p> Signup and view all the answers

What type of tank is used on board to collect dirty water from basins and sinks in port?

<p>Sewage tank (B)</p> Signup and view all the answers

What is the systematic application of management system policies, procedures, and practices to analyze, evaluate, and control environmental risk called?

<p>Environmental Risk Management (A)</p> Signup and view all the answers

Who is responsible for ensuring the engine log book is kept up to date?

<p>Engineer in charge (C)</p> Signup and view all the answers

What is the primary purpose of collecting dirty water from basins and sinks in sewage tanks?

<p>To prevent water pollution (A)</p> Signup and view all the answers

Where is the safest place to do hot work in the engine room?

<p>Boiler room (C)</p> Signup and view all the answers

What type of propeller is generally used for high powered ship?

<p>Controllable pitch propeller (D)</p> Signup and view all the answers

Which of the engine check list listed below should the engineering officer pay attention to, as a daily scheduled task?

<p>Check oil level in engine (D)</p> Signup and view all the answers

What safety precautions should be observed by the crew while working around machinery in an engine room?

<p>They should wear PPE (D)</p> Signup and view all the answers

If a ballast pump has a capacity of 200 gallons per minute and is 100% efficient, how long will it take to fill a ballast tank with 68.5 long tons of seawater?

<p>2.0 hours (C)</p> Signup and view all the answers

What information is not required for the relieving officer to satisfy themselves prior to taking over the engineering watch?

<p>The nature of all works being performed on deck, the personnel involved, and potential hazards (B)</p> Signup and view all the answers

How would you indicate an acceptable equipment in processingbilge stops for overboard discharge?

<p>By performing a series of equipment tests (A)</p> Signup and view all the answers

Which of the following is not entered in the engine log book by watchkeeping engineers?

<p>The engine room temperature at each watch (B)</p> Signup and view all the answers

What is an indication of air trapped in the hydraulic liners of a steering system?

<p>Erratic rudder response (A)</p> Signup and view all the answers

What is the function provided by the crankcase ventilation system on some diesel engine?

<p>To remove blow-by gases (D)</p> Signup and view all the answers

What is an important aspect of maintaining safe engineering watch?

<p>Knowledge of all works being performed on machinery and systems (B)</p> Signup and view all the answers

Who provides special instructions relating to the operation of the ship’s systems and machinery?

<p>The Chief Engineer Officer (C)</p> Signup and view all the answers

What is the correct sequence of actions to be taken in case of a fire?

<p>Find the fire, restrict the source of combustion, extinguish the fire with appropriate means, and inform the bridge and Ch.Engineer. (D)</p> Signup and view all the answers

What could cause foaming of the oil in a refrigeration compressor crankcase?

<p>Refrigerant boiling out of solution from the lube oil (A)</p> Signup and view all the answers

Why might a crew fall while working aloft?

<p>No safety belt (A)</p> Signup and view all the answers

What is the main goal of managing emergencies?

<p>To maintain the safety and security of the ship’s crew and passengers (B)</p> Signup and view all the answers

At which level is the function of maintaining a safe engineering watch performed?

<p>Operational Level (B)</p> Signup and view all the answers

What is the potential consequence of a compressor suction pressure suddenly increasing?

<p>Liquid refrigerant flooding the compressor and system (C)</p> Signup and view all the answers

More Like This

Use Quizgecko on...
Browser
Browser