DC Inverter Features and Functions

Features and Functions

• The inverter uses a large power initially to quickly cool the room during operation
• Then the unit automatically switches to a lower power setting for comfortable and economic operation
• A wireless remote control unit allows for convenient control of the air conditioner
• Automatic vertical swing adjusts the supply air
• The flap automatically moves in an upward and a downward direction to evenly spread the conditioned air throughout the room
• Auto change over automatically switches operation mode, either cooling, dry, or heating, to maintain a set temperature
• While the unit is in sleep mode, during heating the thermostat setting is gradually lowered
• While the unit is in sleep mode, during cooling, the thermostat setting is gradually raised
• Once the period of sleep time function is reached, the unit automatically turns off

Operating Temperature Range for DC Inverter

• Cooling:
  • Indoor Upper Limit: 32°C DB, 23°C WB
  • Indoor Lower Limit: 17°C DB, 12°C WB
  • Outdoor Upper Limit: 50°C DB
  • Outdoor Lower Limit: -15°C DB
• Heating:
  • Indoor Upper Limit: 30°C DB
  • Indoor Lower Limit: 0°C DB
  • Outdoor Upper Limit: 30°C DB, 24°C WB
  • Outdoor Lower Limit: -15°C DB, -16°C WB

Precautions

• Dangers: - Do not attempt to install the air conditioner yourself - This unit contains no user-serviceable parts, always contact a professional for repairs - When moving the unit, contact a professional for disconnection and installation - Do not become excessively chilled by staying int he direct airflow - Do not insert fingers or objects into outlet/intake grilles - Do not start/stop the unit by disconnecting the power cord - Take care to not damage the power supply cord - In the event of a malfunction, stop operation disconnect the power and consult a professional - If the power supply cord is damaged, it should only be replaced by a professional due to special tools being required - Young children or infirm persons shoould not use the appliance without supervision - Pre-heat the air conditioner for at least 12 hours before operation and keep the power on when using for extended periods

• Cautions: - Provide occasional ventilation during use - Do not direct airflow at fireplaces or heating apparatuses - Do not climb on or place objects on the air conditioner - Do not hang objects from the indoor unit - Do not set flower vases or water containers on top of the air conditioner - Do not expose the air conditioner directly to water - Do not operate the air condition with wet hands - Do not pull the power supply cord - Turn off the power source when not using the unit for extended periods of time - Check the condition of the installation stand for damage - Do not place animals or plants in the direct path of the airflow - Do not drink the water drained from the air conditioner - Do not use in applications involving the storage of foods, plants or animals, precision equipment or art works - Be careful, connection valves become hot during heating - Do not apply heavy pressure to radiator fins - Only operate the unit with air filters installed - Do not block or cover the intake grille and outlet port - Ensure that any electronic equipment is at least one meter away from either the indoor or outdoor units - Avoid installing the air conditioner near a fireplace or other heating apparatus - When installing the indoor and outdoor units, take precautions to prevent access to infants - Do not use inflammable gasses near the air conditioner

Parts of the Air Conditioner

• The indoor unit includes:
  • Display
  • Front panel
  • Guide louver
• The remote control is wireless
• The outdoor unit includes:
  • Bind tape
  • Connection wire
  • Drainage pipe

Operation Tips

• A suitable room temperature should be set, excessively low rooms temperatures are bad for health and waste electricity
• The frequent adjustment of the temperature should be avoided
• Avoid direct sun during cooling, keep curtains and blinds closed, close doors and windows to keep cool air inside
• Generating heat or using heating appliances while the air conditioner is in cooling mode should be avoided
• Air flap should e positioned for horizontal flow when cooing, and downward vertical flow for heating
• Room temperature should be kept uniform by adjusting the left/right vertical air blades
• Position the air flaps to prevent your body from being exposed to direct drafts
• During prolonged operation, ventilate the room occasionally by opening a window
• During a power failure the microprocessor retains memory
• When restarted after power failure, operation will resume to the lat mode
• if the timer was used, the unit will be turned off by the timer, if not, timer data may be erased
• After turning the unit on, allow more than three minutes for cooling, heating, and dry operation to start
• When useing DRY mode, the room temperature should be between 20°C and 27°C, if used out of this range the unit may protect itself
• When using COOL or DRY modes, make sure that the rooms relative humidity is blow 78%, high humidity may for moisture
• Remote control signals may not be received if the indoor units cover is exposed to direct sunlight or strong lighting
• The remote control is only operative in a range of eight meters

Protection Modes

• Several automatic protection modes enable operation virtually at any time, regardless of temperature
• In COOL and DRY modes:
  • When the outdoor temperature is too low, it protects from the indoor coil freezing up by stopping the outdoor fan and compressor, resuming when appropriate
  • When the outdoor temperature is too high, it protects from the outdoor coil overheating, then stopping the compressor when appropraching over heating, resuming when appropriate
• In HEATING mode:
  • When the outdoor temperature is loo low, it protects from outdoor coil ice build up by reversing operation from heating to cooling, indicator will blink
  • Where there is high indoor or outdoor temperature mode, protects from outdoor coil overheating, the outdoor fan and compressor stop, then it automatically resumes Note: When switching the unit to OFF after heating, the unit may perform outdoor coil deicing operation, that may make the compressor still run

Care and Maintenance

• Before performing any maintenance procedure, make sure to disconnect the air conditioner from the power
• To clean the air filter:
  • Lift the panel, push the air filters up slightly to unlock them
  • Pull out the filters and clean in warm soapy water, dry thoroughly, align and put back in place
  • Do not operate the unit without filters
• To replace the purification filter, this shouold occur once a year
  1. Pulling out the filter
  2. Replacing the filter in its place
  • Note: This procedure is also used for active carbon filters
• To clean the air conditioner
  • Wipe the unit with a soft dry cloth or lean with a vacuum cleaner, do not use hot water
• At the start of the season:
  • Make sure there are no obstacles blocking the flow of air
  • Make sure the power is properly connected
• To protect the electronic system:
• Indoor unit and remote should stay a least 1 meter a way from other electronic appliances
  • Protect the unit from lighting and direct sun

Troubleshooting

• If the unit doesn't operate and the indicator doesn't light up:
  • The unit might not be connected to power, or there is a power failure
  • Attempt to plug in the power cord, and check the main fuse
• If a unit doesn't operate but indicator lights are on:
  • There could be remote control malfunctions
  • Check the remote control batteries and try operating from a closer distance
• If a unit does not respond properly to the remote control command:
  • The remote could be locked
  • The IR signal may not reach the unit
  • Distance could be too large or at an improper angle
  • Unlock the remote, clear obstructions, and try again, or dim lighting
• If air does not blow from the indoor unit:
  • De-icing is activated, use AUTO fan mode, or there is overcooling in DRY mode
• If cooling, dry, or heating does not start immediately:
  • The compressor has a 3-min delayed start
• If a unit functions but does not perform sufficiently:
  • Set the temperature more appropiatly
  • Consult a dealer if the unit capacity is insufficient

Exception for Multi Split types units

• Could happen that a requested operation cannot be completed
• The reason for this is that the system is operating in a different mode
• Indoor unit operation modes dependent on system mode:
  • Cooling active mode
    • Cooling unit operation is enabled, and Heating, and Dry operations are disabled
    • Auto Cool/Heat will only cool, and ventilation is enabled
  • Heating active mode
    • Heating unit operation is enabled, and Cooling, and Dry operations are disabled
    • Auto Cool/Heat will only heat, and ventilation is enabled