Construction Regulations: Roof Insulation and Trusses
18 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the required occupant load for a room used for habitation, recreation, dining, study, or work in a storey, basement, or cellar with an area of 200 square meters or more?

  • Exactly 30
  • More than 10
  • Less than 5
  • 20 or more (correct)
  • What is the minimum occupant load for dressing rooms, rehearsal rooms, workshops, or factories that fall under Group H and I occupancies?

  • More than 30
  • Less than 5
  • Exactly 10 (correct)
  • 500 or more
  • In which types of rooms should the installation of lath, plaster, and gypsum wall board strictly adhere to fire-resistive rating requirements and building construction type?

  • Dressing rooms
  • Storage rooms
  • Assembly halls
  • Workshops (correct)
  • What code should all electrical systems, equipment, and installations adhere to as mentioned in the text?

    <p>Electrical Engineering Law</p> Signup and view all the answers

    What characteristic must a room have to necessitate adherence to regulations regarding storage or handling of photographic x-ray nitrocellulose films and other inflammable articles?

    <p>An area of 200 square meters or more</p> Signup and view all the answers

    What must be considered when installing lath, plaster, and gypsum wall board in terms of fire-resistive rating requirements?

    <p>The type of construction of the building</p> Signup and view all the answers

    What type of roof insulation is permitted in all types of construction?

    <p>Combustible roof insulation</p> Signup and view all the answers

    How should roof trusses be framed and tied into the framework?

    <p>So as to form an integral part of the whole building</p> Signup and view all the answers

    What should be done before placing any load on roof trusses?

    <p>All tension members well tightened</p> Signup and view all the answers

    How should the occupant load of a building be determined?

    <p>By dividing the floor area by the square footage allowed per occupant</p> Signup and view all the answers

    What determines the exit requirements for a building or portion used for different purposes?

    <p>The occupant load which gives the largest number of persons</p> Signup and view all the answers

    Where should standard automatic fire-extinguishing systems be installed as per the Code?

    <p>In places specified by the Code</p> Signup and view all the answers

    How should dead lateral loads from signs on buildings be transmitted to the ground?

    <p>Through the structural frame of the building</p> Signup and view all the answers

    What may be considered in determining the dead load resisting moment in a building?

    <p>Weight of earth superimposed over footings</p> Signup and view all the answers

    How should signs on buildings be illuminated according to the Philippine Electrical Code?

    <p>Only by electrical means</p> Signup and view all the answers

    What is required for alterations or repairs to existing buildings or structures under R.A. 6541?

    <p>Subject to provisions of the current building code</p> Signup and view all the answers

    What continues to have binding force and effect regarding buildings during the period before the adoption of the current building code?

    <p>Interim rules and regulations on buildings promulgated by the Secretary</p> Signup and view all the answers

    In case a provision of this Decree is declared unconstitutional, what will happen to other provisions?

    <p>The validity of other provisions will not be affected</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Browser