Collector Data Uploads in Single VA Setup
20 Questions
1 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

Which node can collectors upload data to in a single (VA) virtual appliance setup with one supervisor node?

  • The worker nodes
  • The supervisor node (correct)
  • The collector nodes
  • Any node in the cluster
  • In a FortiSIEM cluster, where can collectors upload data to?

  • The supervisor node
  • The collector nodes
  • The worker nodes (correct)
  • Any node in the cluster
  • Why is it not recommended to upload all data to the supervisor node in larger setups?

  • The supervisor node is reserved for other important tasks
  • The supervisor node cannot handle the data overload (correct)
  • The supervisor node is not capable of storing the data
  • The supervisor node does not have the necessary processing power
  • What information do collectors receive during registration to determine where to upload data?

    <p>The worker upload address</p> Signup and view all the answers

    What should be done if there is no worker node in the setup?

    <p>Define the supervisor node as the worker node</p> Signup and view all the answers

    What is the recommended practice for uploading data in a FortiSIEM cluster?

    <p>Upload data to the worker nodes</p> Signup and view all the answers

    What is the first step to install a worker in FortiSIEM?

    <p>Deploy the image</p> Signup and view all the answers

    Where should collectors upload data in a FortiSIEM cluster?

    <p>The worker nodes</p> Signup and view all the answers

    Can workers be installed as VA or hardware devices in FortiSIEM?

    <p>Both as VA and hardware devices</p> Signup and view all the answers

    What should be done after deploying a VA worker for the first time in FortiSIEM?

    <p>Run the configFSM.sh script</p> Signup and view all the answers

    Which user should log in to the worker to run the setup script?

    <p>Root user</p> Signup and view all the answers

    What does the setup script guide you through?

    <p>Both time zone and network configuration</p> Signup and view all the answers

    What must be defined before adding collectors to FortiSIEM?

    <p>IP-address of the worker node</p> Signup and view all the answers

    What is the recommended practice for defining the upload address for collectors across the internet?

    <p>Use FQDN</p> Signup and view all the answers

    What must the customer firewall policies allow for outbound traffic from the collectors?

    <p>All outbound traffic on port 443</p> Signup and view all the answers

    What should be created on the data center firewall to map the public IP-address to the worker private IP-address?

    <p>NAT</p> Signup and view all the answers

    What communication channel is used for sending log data and other tasks from the supervisor node to the collectors?

    <p>TCP port 443</p> Signup and view all the answers

    What ports must be allowed for collector communication to the FortiSIEM cluster?

    <p>TCP port 443</p> Signup and view all the answers

    Where is collector health information and tasks sent to?

    <p>Supervisor node</p> Signup and view all the answers

    Where is event data sent to in the FortiSIEM cluster?

    <p>Worker nodes</p> Signup and view all the answers

    More Like This

    FortiSIEM for MSSPs
    20 questions

    FortiSIEM for MSSPs

    VisionarySugilite avatar
    VisionarySugilite
    FortiSIEM Incident Knowledge Quiz
    7 questions
    Use Quizgecko on...
    Browser
    Browser