Clean Areas and Sterilization Methods Quiz

Clean areas are constructed and used in such a way as to reduce the ______

The Oxidation Oven exposes material to 650ºC in ______ minute(s), 250ºC in 45 minutes, and 180ºC in 4 hours

Intermittent steam sterilization exposes material to 100ºC for 30 min or at 80ºC for 1 hr for ______ consecutive day(s)

The higher the ______, the lower the exposure time

Ethylene dioxide causes ______

Particle ______ filtration will separate the bacteria

Polyethylene (PE) 5 Cannot be ________

Polyethylene terephthalate (PET) is used for ________

Polypropylene (PP) is ________ and can be sterilized

Polyvinylchloride (PVC) is known for its ________ and good clarity

Cold place, freezer, refrigerator, cool room temperature, controlled room temperature, and warm are all examples of ________

Safety packaging includes child-resistant container and tamper-resistant container to prevent access by children under ________ years of age

Airlock - an enclosed space with two or more doors, which is interposed between two or more ______

Bottle, vial, ampule, cartridge, bag, glass, ______ - Single-dose (limit: 1000 mL)

Autoclave (121º C, 15-30 mins, Steam 15psi) - ______ indicator - test the efficiency of sterilization

Dry ______ - Manufacture of sterile product should be carried out in clean areas

Clean areas for carrying out less critical stages of the manufacture of ______ and where relevant beard should be covered

A single or two piece suit gathered at the wrist and with high neck and appropriate shoes or ______ should be worn