Civil Engineering Knowledge Quiz
17 Questions
0 Views

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the term for a piece of securing dunnage that runs from a low supporting level up to the cargo?

  • Shore (correct)
  • Angle of repose
  • Stainless steel tank passivation
  • Boom indicator
  • Who carries out the test of cranes or hoist and accessory gears?

  • Shell platings
  • Boom indicator
  • Shore plates
  • Shore firms (correct)
  • What standard mathematical formula is commonly used to calculate a vessel's water plane area for stability purposes?

  • Sheer lashing
  • Sift-proof receptacle
  • Angle of flooding (correct)
  • Ships constructed
  • What should be done when water accumulates in holds when loading wood chips cargo?

    <p>Should be drained and discharged overboard as soon as possible</p> Signup and view all the answers

    What is the term used for ships the keels of which are laid or which are at a similar stage of construction?

    <p>Ships constructed</p> Signup and view all the answers

    Which part of the ship gives her watertight integrity, covers hull, and binds the whole structure together?

    <p>Shell plates</p> Signup and view all the answers

    What is the minimum breaking strength required for all lashings and components used for securing?

    <p>133 kN</p> Signup and view all the answers

    In coils of up to 15 tons, how should the tank top be dunnaged?

    <p>With 15 cm x 2.5 cm two single lines of dunnage wood boards</p> Signup and view all the answers

    What percentage is the permissible weardown of a sheave during its use of the diameter of the rope in the groove that comes in contact with the wire rope?

    <p>10 to 15%</p> Signup and view all the answers

    When a load is lowering at a speed of 1m/sec, the maximum tension exerted on the cargo wire is sought when the cargo wire is abruptly stopped at which distance?

    <p>20m</p> Signup and view all the answers

    What is the modulus of elasticity specified for the cargo wire in the given context?

    <p>$7 \times 10^6$ kg/sq.cm</p> Signup and view all the answers

    What should be the approximate length of shoring when cutting it?

    <p>1/2 inch shorter than the measured length</p> Signup and view all the answers

    According to Archimedes' principle, what is the buoyant force on an object equal to?

    <p>The weight of the volume of liquid displaced by the object</p> Signup and view all the answers

    What is the purpose of an arrival notice sent by a carrier?

    <p>To inform the recipient of the arrival of the vessel and/or a certain shipment</p> Signup and view all the answers

    Where should one find information about the permissible loads on a vessel's tank top and tween-decks?

    <p>As per the builders' specification</p> Signup and view all the answers

    What should be the minimum factor of safety used to prevent the pressure in a tank from exceeding the design pressure?

    <p>1.25</p> Signup and view all the answers

    How many lashings should be secured for a heavy lift (Jumbo) derrick operation?

    <p>At least 6 lashings</p> Signup and view all the answers

    More Like This

    Use Quizgecko on...
    Browser
    Browser