72 Questions
Is the Student Night event hosted by CIM Sudbury free for students to attend?
True
Is the student membership fee reduced to $15 for the Student Night event?
True
Will transportation be provided for the Student Night event?
True
Is Phil Vipond the contact person for bus RSVP for the Student Night event?
True
Is Dr. Ahlam Maremi part of the faculty at Laurentian University?
True
Is Ahlam Maremi associated with the Mining Optimization Laboratory?
True
Do surface mining methods include open-pit, placer mining, and in-situ leaching?
True
Is auger mining a mechanical extraction method?
True
Is auger mining used as a primary recovery technique?
False
Are auger holes bored horizontally into the coal seam at the high wall?
True
Is the purpose of auger mining to recover coal seams beyond the highwall limits?
True
Is evaporite processing a surface mining technique?
True
Highwall mining and auger mining are used to recover coal from above and below the highwall, respectively.
True
The highwall miner can advance more than 90 m under the highwall.
False
Auger mining recovers around 50% of the coal under the highwall.
False
Highwall mining shares some common elements with a continuous mining machine.
True
The highwall miner has a remote-control system to maintain the thickness between holes.
True
The highwall miner's production rate is lower than that of auger mining.
False
The highwall miner can be adjusted easily to varying seam thickness.
True
The highwall miner reduces the concern over acid-mine drainage.
False
Continuous mining systems like BWE and BCE are used for hard rock extraction.
False
In-Pit Crushing and Conveying (IPCC) is used when haulage distances decrease.
False
Aqueous extraction methods use water or liquid solvent to recover minerals.
True
Surface mining includes mechanical extraction methods but not aqueous methods.
False
Is auger mining a primary recovery technique?
False
Is surface mining a part of the ENGR 2106 course at Laurentian University?
True
Are students encouraged to attend the CIM Sudbury Student Night event?
True
Is the student membership fee reduced to $15 for the Student Night event?
True
Is transportation provided for the Student Night event?
True
Is auger mining used for recovering coal seams beyond the highwall limits?
True
Is the purpose of auger mining to recover coal seams under the highwall?
True
Is evaporite processing a surface mining technique?
True
Is in-situ leaching a surface mining method?
True
Is placer mining a mechanical extraction method?
False
Is dynamic earth the location for the CIM Sudbury Student Night event?
True
Is the admission to the CIM Sudbury Student Night event free for students and includes 2 drink tickets, pizza, and chicken wings?
True
Highwall mining recovers around 50% of the coal under the highwall.
False
Auger mining recovers around one-third of the coal under the highwall.
True
Highwall mining shares some common elements with a continuous mining machine.
True
The highwall miner can advance more than 90 m under the highwall.
False
The highwall miner's production rate is lower than that of auger mining.
False
The highwall miner can be adjusted easily to varying seam thickness.
True
Aqueous extraction methods use water or liquid solvent to recover minerals.
True
In-Pit Crushing and Conveying (IPCC) is used when haulage distances increase.
True
Continuous mining systems like BWE and BCE are used for hard rock extraction.
False
Auger mining is used as a primary recovery technique.
True
Surface mining includes mechanical extraction methods but not aqueous methods.
False
Is Ahlam Maremi associated with the Mining Optimization Laboratory?
True
Highwall mining can advance more than 90 m under the highwall.
True
Highwall mining recovers around 50% of the coal under the highwall.
True
Aqueous extraction methods use water or liquid solvent to recover minerals.
True
Auger mining recovers around one-third of the coal under the highwall.
True
The highwall miner has a remote-control system to maintain the thickness between holes.
True
Auger mining recovers about 35% of the coal under the highwall.
False
In-Pit Crushing and Conveying (IPCC) is used when haulage distances decrease.
False
Surface Miner mining method is used for hard rock extraction.
False
Highwall mining and auger mining are used to recover coal from above and below the highwall, respectively.
True
Aqueous extraction methods recover minerals from the earth using only solid solvents.
False
Highwall mining reduces the concern over acid-mine drainage.
False
Auger mining is used as a primary recovery technique.
False
Is auger mining a secondary recovery technique?
True
Is surface mining a topic of the ENGR 2106 course at Laurentian University?
True
Is evaporite processing a surface mining technique?
True
Is transportation provided for the CIM Sudbury Student Night event?
True
Is the admission to the CIM Sudbury Student Night event free for students and includes 2 drink tickets, pizza, and chicken wings?
True
Is Phil Vipond the contact person for bus RSVP for the Student Night event?
True
Is placer mining a mechanical extraction method?
True
Is Dr. Ahlam Maremi part of the faculty at Laurentian University?
True
Is in-situ leaching a surface mining method?
True
Is in-pit crushing and conveying (IPCC) used when haulage distances increase?
False
Is the highwall miner's production rate lower than that of auger mining?
False
Is the student membership fee reduced to $15 for the Student Night event?
True
"CIM Sudbury Student Night: Mining Optimization Laboratory Announcement" - Join us on Thu Oct 19 at Dynamic Earth for a free Student Night hosted by CIM Sudbury. Enjoy 2 drink tickets, pizza, and chicken wings. Student membership reduced to $15, with free admission to all other events this year. Transportation provided. Don't miss out!
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free