🎧 New: AI-Generated Podcasts Turn your study notes into engaging audio conversations. Learn more

Cable Laying and Jointing Quiz
29 Questions
0 Views

Cable Laying and Jointing Quiz

Created by
@GlamorousCurl

Podcast Beta

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What is the limit for ADSL service in terms of feet?

  • 8,000 (correct)
  • 18,000
  • 20,000
  • 10,000
  • Which type of ADSL variation allows the modem to adjust connection speed based on line length and quality?

  • RADSL (correct)
  • VDSL
  • All
  • SDSL
  • What bandwidth is generally considered as broadband internet when connecting to customers?

  • 56 kbps
  • 64 kbps
  • 256 kbps (correct)
  • 128 kbps
  • What is the function of the Float Rectifier in a power plant?

    <p>48.5 Volts D.C</p> Signup and view all the answers

    How is regulation typically done in power plants?

    <p>By varying the secondary of the main transformer automatically depending on output Voltage</p> Signup and view all the answers

    What does SMPS stand for?

    <p>Switching Mode Power Supply</p> Signup and view all the answers

    What is the theoretical upper limit on data rate in POTS with an available voice band of 3.5KHz and allowed S/N=30dB?

    <p>9.6 Kbps</p> Signup and view all the answers

    In a broadband connection, what happens if an ADSL modem fails?

    <p>Both Broadband and Telephone service get affected</p> Signup and view all the answers

    Which component presents the interfaces to the local distribution for broadband services at the customer premises?

    <p>Service modules (SM)</p> Signup and view all the answers

    What is the common design of most POTS splitters?

    <p>Passive</p> Signup and view all the answers

    Which type of switch are DSLAMs connected to?

    <p>Tier 1 Switches</p> Signup and view all the answers

    What is the maximum frequency range of a copper pair typically measured in?

    <p>Megahertz</p> Signup and view all the answers

    Which of the following IP addresses is not listed as a destination in the routing table of the router with address 168.127.114.5/16 and 192.14.15.9/24?

    <p>168.127.11.31</p> Signup and view all the answers

    Which next hop IP address is not a valid match in the routing table for a router with addresses 128.17.114.5/16 and 203.114.15.9/24?

    <p>203.114.15.43</p> Signup and view all the answers

    In which routing table entry will the router with addresses 172.14.114.5/16 and 198.114.15.9/24 not have a valid 'Type' value?

    <p>static</p> Signup and view all the answers

    Which IP address, not mentioned in the router's addresses, should not be found in its routing table?

    <p>204.127.11.71</p> Signup and view all the answers

    For which router with addresses 204.127.11.31 and 204.127.11.41, which entry is most likely to be present in its routing table?

    <p>(a) Destination: 204.127.11.0 Next Hop: 204.127.11.x Type: direct</p> Signup and view all the answers

    In a conventional 3 piece power plant, ballast chokes are provided in the Battery charger to limit what?

    <p>Charging current variations</p> Signup and view all the answers

    Is the statement 'The FR current is shared by Exchange load and Battery set' true or false?

    <p>False</p> Signup and view all the answers

    Which two power converters are present in the SMPS module?

    <p>Boost converter and DC converter</p> Signup and view all the answers

    In SMPS modules, the output voltage in float mode is -54 ± 0.5 V. What is the output voltage in charge mode?

    <p>-54.5 ± 0.5 V</p> Signup and view all the answers

    Why is a snubber circuit provided in SMPS modules?

    <p>To reduce switching losses of the semiconductors</p> Signup and view all the answers

    What type of charger is suitable for charging VRLA battery?

    <p>Constant voltage charger</p> Signup and view all the answers

    What is the term used for the jointing of pairs of one large size cables to two or more smaller size cables?

    <p>Tee joint</p> Signup and view all the answers

    How should telecom cables be laid when crossing power cables?

    <p>At right angles to the power cables</p> Signup and view all the answers

    What are the protective stone slabs placed over cables in trenches called?

    <p>Warning Bricks</p> Signup and view all the answers

    Why is overlay of conductors in a pair done during the manufacture of telecom cables?

    <p>Cross talk</p> Signup and view all the answers

    What is the circuit between two exchanges in a local network called?

    <p>Telephone circuit</p> Signup and view all the answers

    Which statement correctly distinguishes between Local Area Networks (LAN) and Wide Area Networks (WAN)?

    <p>A WAN has higher delays and higher costs than LAN</p> Signup and view all the answers

    More Quizzes Like This

    CABLE TYPES COMPTIA A+
    2 questions

    CABLE TYPES COMPTIA A+

    InnovativeConstellation avatar
    InnovativeConstellation
    Cable Laying and Termination
    10 questions

    Cable Laying and Termination

    SolicitousOklahomaCity avatar
    SolicitousOklahomaCity
    Railway Engineering Chapter 15: Cable Laying
    20 questions
    Railway Cable Laying Chapter 15
    16 questions

    Railway Cable Laying Chapter 15

    SolicitousOklahomaCity avatar
    SolicitousOklahomaCity
    Use Quizgecko on...
    Browser
    Browser