16 Questions
Bulk Volume vs. Depth Report allows calculation of bulk volume between a depth surface and a horizontal plane at a given depth
True
The result of the Bulk Volume vs. Depth Report is a volume report including calculated volume vs. depth, area statistics, Line plot, and Map view
True
The Bulk Volume vs. Depth function can be accessed by clicking on Horizons in the Data tree and selecting Volumetrics
False
The Bulk Volume vs. Depth Report dialog box has three tabs for input, output/report, and visualization
False
Users can specify most likely, minimum, and maximum HC contacts for bulk volume at specific depths.
True
The Vol vs. Depth curve is used to specify depth range, increments, and boundary values for volume calculations.
True
Model uncertainty cannot be included for top and/or bottom reservoirs in the dialog box.
False
Trend functions from the resulting job can only be found in the Output/Report tab.
False
The Output/Report tab allows for the generation of an output file with cumulative volume estimates and the ability to change curve visual settings.
True
The Output/Report tab also provides options to change the colors of the fill above hydrocarbon (HC) contacts in the Map Visual Settings dialog box.
True
The Report Information section contains options to add information to the report header or footer, such as Block, License, Prospect, Reservoir, and Segment.
True
Users cannot select to show the entire value with two decimal points in the report.
False
Visual aids and settings are not available to customize the report and its visual representations.
False
The dialog box does not offer options to limit bulk volume trends by base reservoir or boundary polygons.
False
The dialog box does not allow users to select top and base reservoir horizons, and surface types from drop-down lists.
False
The Output/Report tab does not allow users to specify report contents, output file type, and visual settings for curves and bulk volume maps.
False
Study Notes
Bulk Volume vs. Depth Report Dialog Box
- The dialog box allows users to select top and base reservoir horizons, and surface types from drop-down lists.
- It offers options to limit bulk volume trends by base reservoir or boundary polygons, which can be created by digitizing in the Viewer.
- Users can specify most likely, minimum, and maximum HC contacts for bulk volume at specific depths.
- The Vol vs. Depth curve is used to specify depth range, increments, and boundary values for volume calculations.
- Model uncertainty can be included for top and/or bottom reservoirs, with optional visual aids in the dialog box.
- The Output/Report tab allows users to specify report contents, output file type, and visual settings for curves and bulk volume maps.
- Trend functions from the resulting job can be found in the Data tree, with specific naming conventions.
- The Output/Report tab allows for the generation of an output file with cumulative volume estimates and the ability to change curve visual settings.
- The Output/Report tab also provides options to change the colors of the fill above hydrocarbon (HC) contacts in the Map Visual Settings dialog box.
- The Report Information section contains options to add information to the report header or footer, such as Block, License, Prospect, Reservoir, and Segment.
- Users can select to show the entire value with two decimal points in the report.
- Visual aids and settings are available to customize the report and its visual representations, including trend functions, volume maps, and report information.
Test your knowledge of the Bulk Volume vs. Depth Report Dialog Box with this quiz. Explore the features and options available to users, from selecting reservoir horizons to specifying report contents and visual settings. Learn about the tools and functions for volume calculations and model uncertainty inclusion.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
