Podcast
Questions and Answers
What does an increase in density altitude affect in terms of takeoff distance?
What does an increase in density altitude affect in terms of takeoff distance?
- Increase in IAS and no change in takeoff distance
- Increase in IAS and takeoff distance
- Decrease in IAS, decrease in takeoff distance
- No change in IAS, increase in takeoff distance (correct)
What is the definition of TORA in aviation?
What is the definition of TORA in aviation?
- Takeoff Run Available (correct)
- Takeoff Regulatory Authority
- Total Overrun Area
- Threshold Offset Runway Area
Which of the following factors contribute to inaccuracies in communication with ATC?
Which of the following factors contribute to inaccuracies in communication with ATC?
- Mispreparation of expectancy (correct)
- Proper flight planning
- Correct phraseology
- Clear guidelines from ATC
What is the primary effect of winglets on an aircraft?
What is the primary effect of winglets on an aircraft?
What is one consequence of icing on a smooth surface of an aircraft?
What is one consequence of icing on a smooth surface of an aircraft?
If your IFR rating has expired, what is your status when flying a two-pilot aircraft?
If your IFR rating has expired, what is your status when flying a two-pilot aircraft?
What factors influence OAT accuracy?
What factors influence OAT accuracy?
Is it okay if a pilot forgets to set alt setting when climbing from FL200 to FL300?
Is it okay if a pilot forgets to set alt setting when climbing from FL200 to FL300?
Where does the antifreeze start with sprinkling
Where does the antifreeze start with sprinkling
What needs to happen for maintenance release?
What needs to happen for maintenance release?
Flashcards are hidden until you start studying
Study Notes
Altitude Settings
- During climb from FL200 to FL300, forgetting to set alt setting is acceptable due to subscale.
Aircraft Performance
- Land weight is 34,800.
Density Altitude
- Increasing density altitude does not affect IAS, but increases takeoff distance.
Airport Runway Configurations
- TORA (Takeoff Run Available), TODA (Takeoff Distance Available), and LDA (Landing Distance Available) are essential airport runway configurations.
Temperature Effects
- OAT (Outside Air Temperature) accuracy affects speed and friction calculations.
Icing Conditions
- Icing on smooth surfaces influences the bouyancy force (B. Force).
Communication Errors
- Mispreparation and expectancy are key factors contributing to errors in communication with ATC.
Airport Operations
- Antifreeze sprinkling typically starts at a visible location from the cockpit.
Aircraft Loading
- Moving baggage is limited to 200 units.
Aircraft Design
- Winglets decrease induced drag but increase form drag.
Pilot Ratings
- An expired IFR rating allows a pilot to fly as PIC or copilot in a two-pilot aircraft, but not carry passengers.
Safety Management
- Select multiple options, avoiding the longest one.
Stall Warning Systems
- Stall warning systems operate only in non-icing conditions.
Engine Performance
- N1 and FF calculations: 86.9% FF corresponds to 493.
Aircraft Stability
- Dihedral is related to the longitudinal axis, affecting lateral stability.
Maintenance Procedures
- A maintenance release is a critical document.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
