Podcast Beta
Questions and Answers
How can the Timer/Counter register TCNT0 be updated?
What happens if no clock source is selected for the Timer/Counter register TCNT0?
How is the source of the clock determined for the Timer/Counter register TCNT0?
What is the purpose of the Output Compare Registers OCR0A and OCR0B?
Signup and view all the answers
What is the function of the Waveform Generator in relation to the Output Compare pins?
Signup and view all the answers
Study Notes
Overview of ATmega328P Timers and Counters
- ATmega328P features three timer/counters: TC0, TC1, and TC2.
- TC0 and TC2 are both 8-bit timers with a maximum count of 255.
- TC1 is a 16-bit timer with a maximum count of 65,535.
Initialization and Functions
- All timer/counters are disabled upon power-on or reset and must be enabled via software.
- Arduino's
init()function initializes timer/counter settings for proper functioning of functions likemillis(),micros(), andanalogWrite().
Timer/Counter Operation
- Timer/counters serve dual functions:
- Timing: Counts up and down using the internal system clock when operating as a timer.
- Counting: Counts up and down based on external rising or falling edges on designated pins when operating as a counter.
Key Characteristics
- Timer/counters provide flexibility in applications requiring precise timing or event counting.
- The performance and capability are dictated by the bit resolution (8-bit vs. 16-bit) which determines the maximum count value.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge of ATMEGA328P hardware by taking this quiz on timers and counters. Explore timer/counter introduction, block diagram, registers, and examples of normal and CTC modes. Get ready to dive into the specifics of the ATMEGA328P's timer/counter functionality.
