Podcast
Questions and Answers
Match the standard specification/test method with its application in concrete/hydraulic cement:
Match the standard specification/test method with its application in concrete/hydraulic cement:
C1005-20 = Reference Masses and Devices for Determining Mass and Volume C1585-20 = Measurement of Rate of Absorption of Water by Hydraulic Cement Concrete C1105-23 = Length Change of Concrete Due to Alkali-Carbonate Rock Reaction C123/C123M-23 = Lightweight Particles in Aggregate
Match the ASTM standard with its application in aggregate/concrete testing:
Match the ASTM standard with its application in aggregate/concrete testing:
ASTM C29/C29M = Bulk Density and Voids in Aggregate C1293/C1293M-23a = Length Change of Concrete Due to Alkali-Silica Reaction C40 = Organic Impurities in Fine Aggregates C778-21 = Standard Specification for Standard Sand
Match the standard specification/test method with its application in steel:
Match the standard specification/test method with its application in steel:
A612/A612M-20 = Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service A321-90(2001) = Steel Bars, Carbon, Quenched and Tempered A49-12(2019) = Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars C779/C779M-19 = Abrasion Resistance of Horizontal Concrete Surfaces
Match the standard specification/test method with its application in construction materials:
Match the standard specification/test method with its application in construction materials:
Match the standard specification/test method with its application in concrete/hydraulic cement:
Match the standard specification/test method with its application in concrete/hydraulic cement:
Match the ASTM standard with its application in aggregate testing:
Match the ASTM standard with its application in aggregate testing:
Flashcards are hidden until you start studying
Study Notes
ASTM Standards for Materials and Testing
- C70-20 outlines the standard test method for surface moisture in fine aggregate
- F2408-16(2023) specifies the standards for ornamental fences employing galvanized steel tubular pickets
- C778-21 defines the standard specification for standard sand
- C779/C779M-19 outlines the standard test method for abrasion resistance of horizontal concrete surfaces
Testing Methods for Concrete and Aggregates
- C1585-20 provides a standard test method for measuring the rate of absorption of water by hydraulic cement concrete
- C29/C29M outlines the test method for bulk density and voids in aggregate
- C535 outlines the test method for resistance to degradation of large-size coarse aggregate by abrasion and impact in the Los Angeles machine
- C40 outlines the test method for organic impurities in fine aggregates concrete
- C1018-97 outlines the test method for flexural toughness and first-crack strength of fiber-reinforced concrete (using beam with third-point loading)
Specifications for Steel and Other Materials
- A612/A612M-20 outlines the standard specification for pressure vessel plates, carbon steel, high strength, for moderate and lower temperature service
- A321-90(2001) outlines the standard specification for steel bars, carbon, quenched and tempered (withdrawn 2007)
- A49-12(2019) outlines the standard specification for heat-treated carbon steel joint bars, microalloyed joint bars, and forged carbon steel compromise joint bars
Additional Standards
- C1005-20 outlines the standard specification for reference masses and devices for determining mass and volume for use in physical testing of hydraulic cements
- C1105-23 outlines the standard test method for length change of concrete due to alkali-carbonate rock reaction
- C123/C123M-23 outlines the standard test method for lightweight particles in aggregate
- C1293/C1293M-23a outlines the standard test method for determination of length change of concrete due to alkali-silica reaction
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
