Podcast Beta
Questions and Answers
What is the recommended step before assembling the clutch assembly?
What should be done to avoid leaks in the rebuilt unit?
How should the one-way roller clutches be installed?
What should be done to verify clutch pack performance?
Signup and view all the answers
What should be done before returning the rebuilt unit to the customer?
Signup and view all the answers
Why is it important to use recommended special tools and procedures?
Signup and view all the answers
Study Notes
- Soak friction plates in ATF before assembling clutch assembly.
- Use air pressure check to verify clutch pack performance.
- Inspect and replace bushings as necessary.
- Double check one-way roller clutches are installed correctly.
- Use recommended special tools and procedures.
- Check valve body with tester before installation.
- Replace pump bolts and sealing washers to avoid leaks.
- Check and flush ATF cooler for proper flow.
- Test rebuilt unit on dynamometer before installation.
- Perform road test procedure and check for leaks before returning to customer.
Studying That Suits You
Use AI to generate personalized quizzes and flashcards to suit your learning preferences.
Description
Test your knowledge of automatic transmission rebuilding with this quiz! From inspecting and replacing bushings to using recommended special tools and procedures, this quiz covers everything you need to know to ensure a successful rebuild. Learn about the importance of soaking friction plates in ATF, verifying clutch pack performance with an air pressure check, and double checking the installation of one-way roller clutches. Don't forget to check the valve body with a tester and flush the ATF cooler for proper flow. Test your skills by answering questions on
