10 Questions
What is the minimum longitudinal separation required between aircraft flying on the same track, at the same level, climbing or descending through the level of another aircraft, flying in the same direction on all EMARSSH routes?
10 minutes based on Mach No. Technique (MNT)
What does an ATS route designator indicate regarding navigation performance accuracy?
It indicates the required level of navigation performance accuracy when operating along an ATS route within a specified area
Which types of aircraft are primarily or exclusively allowed to operate on a route indicated by an ATS route designator?
The designator does not indicate this information
What is the maximum number of characters that can be used to compose an ATS route designator?
Six characters
What is the minimum longitudinal separation required between aircraft flying on crossing tracks, at the same cruising level or climbing/descending through the level of another aircraft?
15 minutes if the tracks are not crossing over navigational aids
Which condition must be followed by an aircraft operating into/from across India regarding joining or crossing ATS routes?
Aircraft shall not join or cross ATS routes without prior approval/ATC clearance from the ATS units concerned, obtained at least 10 minutes prior to entry if in direct contact on VHF and at least 20 minutes prior to entry if contact is through en-route radio frequency.
Which condition applies to an aircraft transiting from one FIR to another FIR operating into/from across India?
Aircraft transiting from one FIR to another FIR shall forward estimates for the FIR boundary including flight level to the ATS unit responsible for providing flight information service in the FIR to be entered, at least 10 minutes prior to entry. This shall only apply when an aircraft is transiting to a foreign FIR or vice-versa.
Which condition applies to an aircraft operating into/from across India regarding position reports?
Position reports to the appropriate ATS units shall be made in accordance with AIP India ENR 1.7.
Which condition applies to an aircraft operating within 15NM of the international border of India?
All aircraft are forbidden to operate within 15NM of the international border of India unless specifically permitted or except when following the ATS route or operating to and from any aerodrome situated within 15NM of the international border of India.
Which condition must be followed by an aircraft operating into/from across India regarding obtaining ATC clearance?
Aircraft shall obtain ATC clearance from the appropriate ATS unit at least 10 minutes prior to entering controlled airspace.
Test your knowledge of the conditions that all aircraft operating into/from across India must follow, including prescribed routes, obtaining ATC clearance, and joining or crossing ATS routes with prior approval.
Make Your Own Quizzes and Flashcards
Convert your notes into interactive study material.
Get started for free
