QAB Review (Aircraft Ground Operations)

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson

Questions and Answers

What precaution should be taken when performing tasks like welding, cutting, or grinding in the aircraft maintenance area?

  • Use defective tools and equipment
  • Keep the work stands at an appropriate height
  • Perform the tasks quickly to minimize sparks
  • Observe a distance of 15 meters (50 feet) (correct)

What action should be taken if defective tools and equipment are identified in aircraft maintenance?

  • Continue using them as long as they work
  • Properly tag/labeled indicating their defects (correct)
  • Ignore the defects and proceed with the work
  • Dispose of them immediately

When is it necessary to install a 'DO NOT OPERATE' tag on the aircraft control panel system?

  • While performing maintenance on the power supply or moving part of the aircraft (correct)
  • After completing all maintenance tasks
  • Only when the aircraft is grounded
  • During regular flights

What is an important safety measure when composing an aircraft towing team?

<p>Ensuring the towing team is composed correctly (C)</p> Signup and view all the answers

What is the primary reason for observing a safe distance during tasks producing sparks?

<p>Prevent damage to aircraft parts (C)</p> Signup and view all the answers

What is one of the safety precautions that should be taken before raising an aircraft on jacks?

<p>Removing all work stands and unnecessary equipment near the aircraft (B)</p> Signup and view all the answers

What should be inspected before using jacks to raise an aircraft?

<p>Proper functioning of safety locks, condition of pins, and lifting capacity (B)</p> Signup and view all the answers

What should be marked on jacks to indicate information to the user?

<p>Lifting capacity and maintenance check due date (C)</p> Signup and view all the answers

What is a requirement for securing the area around an aircraft on jacks?

<p>Using ropes or appropriate warning signs (B)</p> Signup and view all the answers

What should be done with hangar doors before a jacking operation inside the hangar?

<p>They should be closed (A)</p> Signup and view all the answers

How can aircraft maintenance and ground operations accidents be prevented?

<p>By keeping your mind on the job and applying safety regulations (B)</p> Signup and view all the answers

What precaution should personnel take during aircraft refueling or draining operations?

<p>Dissipate body static potential by gripping the static ground line (C)</p> Signup and view all the answers

How many serviceable fire extinguishers should be available in the refueling truck?

<p>At least two with a minimum UL rating of 20 B (C)</p> Signup and view all the answers

What should be on standby within 15 meters during specific refueling situations?

<p>(125 lbs.) dry chemical firex and fireguard (A)</p> Signup and view all the answers

Who typically assists in aircraft refueling or defueling operations?

<p>LTP fuel technicians (D)</p> Signup and view all the answers

What is a crucial aspect of fire protection during aircraft maintenance?

<p>Having at least two serviceable fire extinguishers with a minimum UL rating of 20 B (C)</p> Signup and view all the answers

What should personnel do to dissipate body static potential during refueling operations?

<p>Repeatedly grip the static ground line (A)</p> Signup and view all the answers

Who is allowed to operate ground support equipment (GSE) according to the text?

<p>Any person with a valid Permit to Operate (PTO) (B)</p> Signup and view all the answers

What must be the position of hangar doors when an aircraft is on jack?

<p>Closed (D)</p> Signup and view all the answers

What should be utilized to prevent Foreign Object Damage (FOD) according to the text?

<p>FOD Pouch (A)</p> Signup and view all the answers

Who is responsible for conducting aircraft engine run-up according to the text?

<p>Authorized individuals following safety protocols (C)</p> Signup and view all the answers

What is a key requirement for anyone operating ground support equipment (GSE)?

<p>Holding a Permit to Operate (PTO) (D)</p> Signup and view all the answers

What is a significant safety precaution in aircraft towing as per the text?

<p>Using authorized personnel and equipment (B)</p> Signup and view all the answers

Which document might contain information about Aircraft Welding Operations based on the text?

<p><code>IQ MOVE Document No.: DOC33350 Page 20</code> (A)</p> Signup and view all the answers

What does FOD stand for in the context of aircraft maintenance and operations?

<p><strong>Foreign Object Debris</strong> (C)</p> Signup and view all the answers

What is the main purpose of the Towing Team Leader in aircraft towing operations?

<p>Lead the team and coordinate the towing process (C)</p> Signup and view all the answers

In which zone would you find the highest risk of Foreign Object Damage (FOD) incidents according to the text?

<p>Critical Zone (C)</p> Signup and view all the answers

What does the Aircraft Engine Run Up Safety Checklist primarily aim to ensure?

<p>Safe engine testing and maintenance procedures (B)</p> Signup and view all the answers

What is the role of the Tail Walker in aircraft towing operations?

<p>Ensure safe tail movement during towing (C)</p> Signup and view all the answers

What is emphasized as a permanent requirement in aviation safety?

<p>Strict adherence to safety regulations (C)</p> Signup and view all the answers

What area would be classified as having 'Minimal contact with any type of aircraft hardware' in terms of Foreign Object Damage awareness?

<p>Offices and hallways (B)</p> Signup and view all the answers

What does a Brake Rider primarily do during aircraft towing?

<p>On and Off of Parking Brakes as requested by Headset man Crew Chief (A)</p> Signup and view all the answers

What does it mean when it is said 'Recognized Danger = Avoidable Danger' based on the text?

<p>'If a danger is recognized, it can be avoided.' (D)</p> Signup and view all the answers

85% of all accidents are due to?

<p>Human Error</p> Signup and view all the answers

Flashcards are hidden until you start studying

Related Documents

More Like This

Use Quizgecko on...
Browser
Browser