EMP Module 2

Play an AI-generated podcast conversation about this lesson

What is the primary purpose of removing the corrosion preventative fluid from the fuel system?

To replenish the oil system

To prepare the engine for maintenance (correct)

To inhibit corrosion in the engine

To prevent fuel leakage

What should be revised before commencing practical activities associated with engine component maintenance?

Mechanical Fundamentals training manual

Aircraft maintenance documentation

Learning from 213406 training (correct)

Component removal and installation procedures

What is the final step in the maintenance procedure for engine component maintenance?

Tag and package the component per standard procedures

Return aircraft/system to a serviceable state (correct)

Confirm correct Part/Model number and Mod status

Consult your instructor if you have any difficulties

What is the purpose of applying system isolation tags?

To render the aircraft safe Signup and view all the answers

Where should the engine be installed to allow for greater access during component removal and installation?

On a work-stand Signup and view all the answers

What is the primary concern when inspecting engine mounts?

Cracks, bends, dents, flat spots, and elongated bolt holes Signup and view all the answers

During inspection, what should be checked on cable pulleys?

Binding, flat spots, and chipped edges Signup and view all the answers

What is the purpose of inspecting areas where cables and rods pass through bulkheads or panels?

To check for evidence of chafing and misalignment Signup and view all the answers

What should be inspected for dents, nicks, and kinks?

Plumbing tubing Signup and view all the answers

What type of inspection may be required for engine mounts after engine removal?

Non-Destructive Inspection (NDI) procedure Signup and view all the answers

During gas turbine engine maintenance procedures, what should trainees ensure is worn while carrying out maintenance tasks?

Personal Protective Equipment (PPE) in accordance with Safety Data Sheets (SDS) Signup and view all the answers

What is a critical aspect of planning and organising maintenance tasks effectively and efficiently?

Interpretation of Aircraft Maintenance Documentation (AMD) Signup and view all the answers

During maintenance tasks, what should trainees inform their supervisors of, if applicable?

Potential health issues or safety hazards Signup and view all the answers

What should trainees demonstrate during gas turbine engine maintenance procedures?

Applicable assessment procedures Signup and view all the answers

What is essential for maintaining a safe working environment during gas turbine engine maintenance?

Compliance with Foreign Object Control (FOC) requirements Signup and view all the answers

What is the primary purpose of rigging checks and adjustments during engine installation?

To verify that the controls are at the correct position when selected Signup and view all the answers

What must be completed before functional tests and leak checks are carried out?

Rigging checks and adjustments Signup and view all the answers

What is the purpose of a thorough zonal inspection of the work area after engine installation?

To verify that all connections are properly made Signup and view all the answers

What must be refitted after the engine installation and connection process is complete?

All panels required for access Signup and view all the answers

What is the final step in the engine installation procedure?

Refit of all panels and completion of quality inspections Signup and view all the answers

What is the primary purpose of Independent Maintenance Inspections (IMIs)?

To verify the technical integrity of safety critical items and systems Signup and view all the answers

What type of equipment is considered part of safety critical items and systems?

Associated equipment connected to the aircraft's flying, engine, or undercarriage control systems Signup and view all the answers

What document specifies the IMI requirements for maintenance tasks during engine changes or component replacements?

eAMMM 7001.059 Signup and view all the answers

What is the primary goal of performing Independent Maintenance Inspections (IMIs) on safety critical items and systems?

To minimise risk of loss/damage to aircraft and loss of life/injury to personnel Signup and view all the answers

What is a critical aspect of performing Independent Maintenance Inspections (IMIs)?

Conducting IMIs in accordance with prescribed standards and practices Signup and view all the answers

During engine maintenance scenarios, what is the primary role of instructors?

To supervise, assist, and assess trainees' work Signup and view all the answers

What is a key aspect of the engine maintenance scenarios?

Demonstrating acceptable aircraft maintenance practices Signup and view all the answers

What is an expected outcome of the engine maintenance scenarios?

Trainees demonstrate knowledge and skills in gas turbine engine maintenance tasks Signup and view all the answers

What do the engine maintenance scenarios aim to promote?

Teamwork in the performance of large tasks Signup and view all the answers

What is an essential aspect of trainees' learning in the engine maintenance scenarios?

Researching appropriate procedures and demonstrating knowledge and practical skills Signup and view all the answers

What should be performed in accordance with approved documentation when carrying out removal, installation, or operation of engines/APUs or their components?

All required maintenance documentation Signup and view all the answers

What is the recommended approach to engine maintenance, considering the variability in procedures across different aircraft types?

Consulting applicable aircraft technical publications Signup and view all the answers

What is essential for performing removal, installation, or operation of engines/APUs or their components?

Completing all required maintenance documentation Signup and view all the answers

What should be consulted to ensure compliance with standard practices during engine maintenance?

Approved documentation Signup and view all the answers

What is the purpose of generic procedures in engine maintenance?

To offer a general framework for engine maintenance Signup and view all the answers

What is a critical aspect of engine maintenance that should be performed in accordance with approved documentation?

Operation of engines/APUs or their components Signup and view all the answers

What is essential for ensuring safe and effective engine maintenance?

Familiarity with standard maintenance practices Signup and view all the answers

Why is it important to consult applicable aircraft technical publications during engine maintenance?

To obtain specific guidance for each aircraft type Signup and view all the answers