Untitled quiz

Choose a study mode

Play Quiz
Study Flashcards
Spaced Repetition
Chat to Lesson

Podcast

Play an AI-generated podcast conversation about this lesson
Download our mobile app to listen on the go
Get App

Questions and Answers

What hand signal must be given before an aircraft can be approached, and the main landing gear can be safely chocked?

  • stop.
  • Chocks In.
  • Safe To Approach. (correct)
  • Clear To Move Aircraft.

Lita is preparing to operate a motorized GSE vehicle. What should she do first before operating the GSE?

  • Verify the weather conditions are favorable for operating GSE.
  • Check to see if the GSE is reserved for another gate.
  • Perform a user check for the GSE. (correct)
  • Test the headset equipment before operating the GSE.

John is loading bags onto an aircraft and finds several Expedite or Rush-tagged bags on the bag cart. What should he do with the Expedite or Rush bags?

  • Confirm the bags are routed for the current flight and destination and load immediately, returning the bags to the customers as soon as possible. (correct)
  • Take the bags back to the baggage processing area because the tags were handwritten.
  • Set the bags on the ground and wait until the Lead clears the bags.
  • Hold the bags until just before departure time to ensure he can safely load the Rush bags without delaying

What needs to be accomplished before approaching the Operational Safety Zone (OSZ) with any Ground Service Equipment? Select all answers which apply.

<p>Ensure aircraft engines are off and spooling down. (A), Verify the aircraft has been secured with chocks. (B), Ground Crew must never approach the aircraft if there is any question of whether it is safe to do so. (C), When entering the Operational Safety Zone, all motorized Ground Service Equipment must perform a safety stop. (D)</p> Signup and view all the answers

Shanti is scanning baggage for an outbound flight that is behind schedule. Since his team is in a hurry, he feels it's okay to skip manual verification of the bag tag and label information for the loaded items. Do you agree with Shanti's decision to skip the manual verification to save time?

<p>RSEs should always verify the flight number and destination for baggage and cargo being loaded onto a departing aircraft. (B)</p> Signup and view all the answers

The Aircraft Departure Team is getting ready for aircraft pushback. What critical step must take place prior to pushback?

<p>The team must conduct the pre-departure walk around to check for potential safety hazards. (C)</p> Signup and view all the answers

Before an aircraft can depart from the gate, the jetbridge (Passenger Loading Bridge) must be removed and parked in the stow box. Which statements) are correct concerning the jetbridge?

<p>A Guideperson is required to guide the jetbridge into position. (A), The Guideperson is responsible for visually checking the jetbridge movement area for obstructions. (C)</p> Signup and view all the answers

Seth's team is running behind schedule while loading an aircraft for an outbound flight, and he decides to save time and cross between the baggage carts instead of walking around them. When is this action permitted?

<p>Walking between baggage/ cargo carts is never permitted. (C)</p> Signup and view all the answers

Darn communicates with hand signals to the pushback driver, but he feels the driver is having difficulty understanding his hand signal communications. Which hand signal should he use if he needs to communicate verbally with the driver to ensure he understands all communications?

<p>Emergency Stop (C)</p> Signup and view all the answers

Brian is preparing to wingwalk a departing aircraft. Where should he position himself to accomplish the task safely?

<p>›In the general area of the wing tip, he must maintain a safety clearance of at least 10 feet from the aircraft or tractor at all times and is visible to the pushback driver. (B)</p> Signup and view all the answers

How much mail was loaded on the flight?

<p>217 (D)</p> Signup and view all the answers

A pre-departure walkaround is required for every departing aircraft. Which statements) are correct concerning the pre-departure walkaround?

<p>Always conduct the pre-departure walkaround in the same manner, beginning at the nose of the aircraft and continuing around the fuselage, wings, and tail section. (A), Anytime a Ramp Service Employee completes a pre-departure walkaround and then leaves the Operational Safety Zone, an additional pre-departure walkaround must be conducted and completed before departure. (B), The pushback driver is responsible for ensuring completion of the pre-departure walkaround. (C), any damage is found during the pre-departure walkaround, it must be reported immediately to your lead. (D)</p> Signup and view all the answers

Sheila is verifying the flight number 653 and destination information (DEN) on the Automated Bag Tags (ABT) for the baggage she is placing onto the beltloader. From which direction should she read the information on the ABT?

<p>From bottom to top (B)</p> Signup and view all the answers

Brenton has been assigned to unload flight 1234. How can he determine the quantity and location of the baggage and cargo on flight 1234?

<p>Print a DALR and DASG for flight 1234. (D)</p> Signup and view all the answers

When are lighted wands required for aircraft guidance? Select all correct answers

<p>Lighted wands must be used from 30 minutes prior to sunset until 30 minutes after sunrise. (B), Lighted wands must be used during low visibility, or any time inclement weather reduces visibility. (C)</p> Signup and view all the answers

What guidelines must be followed when handling Dangerous Goods packages? Select the correct statement(S).

<p>Always observe all directional markings. (A), When loading Hazardous Materials (HazMat), it must be surrounded and secured by 15 bags, 450lbs of mail, or ballast to secure HazMat. (B), Ramp Service employees must inspect the packages for damage or leaks when handling Dangerous Goods packages (C)</p> Signup and view all the answers

The Aircraft Arrival Team is assigned to unload an A320 aircraft. What safety precautions should they take when opening the cargo door?

<p>Ensure the beltloader and other GSE are clear of the cargo door path. (B)</p> Signup and view all the answers

Kara works at the bottom of the beltloader to place baggage and cargo into the baggage/cargo carts. Her team member in the cargo pit is placing items onto the beltloader at a fast pace. What should Kara do if she feels the pace is too fast for her to load items into the carts?

<p>Use appropriate communications to slow the pace or shut off the beltloader to catch up. (C)</p> Signup and view all the answers

The Aircraft Arrival Team is ready to begin unloading a B737. What is required before we start unloading the plane.

<p>All options. (A)</p> Signup and view all the answers

Three Point Connections between an aircraft and Ground Service Equipment are?

<p>Three Point Connections are never allowed and are a major cause of damage. (C)</p> Signup and view all the answers

Sean is handling baggage for an outbound flight and notices a small bag with a "Heavy" tag attached. What action should he take when handling a bag with this tag type?

<p>He should get a sense of the bag's weight first by pushing it and asking for assistance if necessary (C)</p> Signup and view all the answers

Jacob has just loaded the last items into cargo pit 1 of a B737 aircraft. He did not load any baggage or cargo into the last cargo pit 2. What action should he take to secure the empty cargo pit for the flight?

<p>Even if cargo pit 2 will remain empty during the flight, the cargo pit nets must still be fastened across the cargo area. (B)</p> Signup and view all the answers

Debra is new to her role as an RSE and is learning about the compartment layouts for each narrowbody aircraft type and model. Which aircraft have two cargo compartments with six pits? (Select all that apply)

<p>The B757 (B), The B737 (D)</p> Signup and view all the answers

Sutha is the Marshaller for an arriving aircraft. What hand signal should she use to signal to bring the aircraft to the designated stop mark?

<p>Normal Stop (D)</p> Signup and view all the answers

How many terminating bags were loaded on the flight?

<p>66 (D)</p> Signup and view all the answers

James is working in the bagroom segregating bags. All three flights James is currently working are for narrowbody aircraft. Which statement is false?

<p>Use ULD containers since they have a hold more bags. (D)</p> Signup and view all the answers

What is the purpose of the FOD Check?

<p>To ensure the Operational Safety Zone is clear of any objects that can be ingested or taxied over. (A)</p> Signup and view all the answers

What precautions must always be followed when operating motorized Ground Service Equipment? Select all answers that apply.

<p>Always keep all body parts inside the Ground Service Equipment. (A), Never use Personal Electronic Devices. (B), Always set the parking brake when parking Ground Service Equipment. (C), Aircraft, pedestrians, and emergency vehicles have the right-of-way at all times. (D)</p> Signup and view all the answers

Janice is the marshaller for flight UA3762. When should Janice give the "Safe to Approach" hand signal to the wingwalkers?

<p>When the nose wheel is properly chocked, engines are off and spooling down, and beacon light is off (A)</p> Signup and view all the answers

Carl is the Marshaller for an arriving aircraft. As a part of the Aircraft Arrival Team, one of his main responsibilities is to:

<p>Ensure safe arrival of the aircraft to the gate area. (C)</p> Signup and view all the answers

Raj is loading items into an Airbus 319 cargo pit, and the baggage and cargo load is very full. How many inches should cargo have to clear the ceiling of a 319?

<p>A minimum ceiling clearance of two inches must be maintained to prevent blocking of the fire suppression system with all of our aircraft. (D)</p> Signup and view all the answers

Juan is preparing for an aircraft arrival when he notices a Red Unserviceable Tag on a piece of Ground Service Equipment (GSE). The Red Unserviceable Tag indicates that the GSE...

<p>Ared tag means the GSE is unsafe to use. (D)</p> Signup and view all the answers

Jamila is operating a motorized SE vehicle. When should she perform a "safety stop" to check the brakes on the vehicle?

<p>When approaching the edge of the Operational Safety Zone. (B)</p> Signup and view all the answers

The Aircraft Arrival Team is preparing for an arriving flight, but they have just been notified that the arrival has been delayed. When flight delays occur, RSEs should?

<p>Stay flexible to the needs of the service and communicate with the Lead. (C)</p> Signup and view all the answers

Leticia handles two bags with the PPBM identifier on the bag tags. What action should she take when handling bags with the PPBM identifier?

<p>She should NOT load the bags onto the aircraft until they are cleared for boarding. (D)</p> Signup and view all the answers

What step is always required before disconnecting the PC Air and Ground Power on all departing aircraft?

<p>Confirm with the flight deck the PC Air and Ground Power are no longer needed and may be safely removed from the aircraft. (D)</p> Signup and view all the answers

Hector is reviewing the information on the DAS report for the number of arriving bags and cargo. He notices there are 12 bags with the commodity code of “R”. What does the Standard Loading Symbol "R" indicate?

<p>Priority Bags (D)</p> Signup and view all the answers

The Aircraft Arrival Team is unloading an aircraft that requires a tail stand to prevent tail-tip. Which aircraft type is most susceptible to tail-tip under certain circumstances?

<p>All 737-900 aircraft (C)</p> Signup and view all the answers

Jonas is preparing the departure ground service equipment. Before starting the process to connect the pushback, what has to be done? Select all that apply.

<p>Check the rating of the tractor and connect the tractor to the towbar. (A), Verify the bypass pin is rated for the aircraft and install the bypass pin. (B), Verify the rating of the towbar and connect to the aircraft. (C)</p> Signup and view all the answers

Shelly is preparing the Operational Safety Zone for an aircraft arrival and notices the pushback tractor is improperly parked within the OSZ. She is not trained or qualified to operate the pushback tractor. What should she do?

<p>Wait until a trained and qualified pushback tractor operator can safely park the pushback tractor in the designated parking area. (A)</p> Signup and view all the answers

Mauricio is preparing to unload baggage and cargo from an aircraft that has just arrived. Once the aircraft is chocked and the "safe to approach" hand signal is given, which items) require special handling and should be delivered to the top of the PLB as soon as possible?

<p>Strollers and wheelchairs (D)</p> Signup and view all the answers

Flashcards

Safe To Approach Signal

A hand signal indicating it is safe to approach the aircraft and chock the main landing gear.

GSE User Check

Before operating any motorized Ground Support Equipment, a user check must be completed to ensure that the GSE is working correctly.

Handling Expedite/Rush Bags

Confirm the bags are routed for the current flight and destination and load immediately, returning the bags to the customers as soon as possible.

Approaching the OSZ

Ensuring aircraft engines are off and spooling down must be accomplished before approaching the Operational Safety Zone (OSZ) with any Ground Service Equipment

Signup and view all the flashcards

Manual Verification of Bag Tags

RSEs should always verify the flight number and destination for baggage and cargo being loaded onto a departing aircraft.

Signup and view all the flashcards

Pre-Departure Walk Around

Conduct the pre-departure walk around to check for potential safety hazards.

Signup and view all the flashcards

Jetbridge Operation

A guideperson is required to guide the jetbridge into position.

Signup and view all the flashcards

Walking Between Carts

Walking between baggage/cargo carts is never permitted.

Signup and view all the flashcards

Emergency Stop Signal

Emergency Stop hand signal should be used if verbal communication is needed.

Signup and view all the flashcards

Wingwalking Safety

In the general area of the wing tip, he must maintain a safety clearance of at least 10 feet from the aircraft or tractor at all times and is visible to the pushback driver.

Signup and view all the flashcards

Pre-Departure Walkaround Procedure

Always conduct the pre-departure walkaround in the same manner, beginning at the nose of the aircraft and continuing around the fuselage, wings, and tail section.

Signup and view all the flashcards

Reading Automated Bag Tags (ABT)

Read the information on the ABT from bottom to top.

Signup and view all the flashcards

Determining Baggage/Cargo Quantity and Location

Print a DALR and DASG for flight 1234.

Signup and view all the flashcards

When to Use Lighted Wands

Lighted wands must be used from 30 minutes prior to sunset until 30 minutes after sunrise.

Signup and view all the flashcards

Handling Dangerous Goods

Always observe all directional markings.

Signup and view all the flashcards

Opening Cargo Door Safety

Ensure the beltloader and other GSE are clear of the cargo door path.

Signup and view all the flashcards

Managing Beltloader Pace

Use appropriate communications to slow the pace or shut off the beltloader to catch up.

Signup and view all the flashcards

Three Point Connections

Three Point Connections are never allowed and are a major cause of damage.

Signup and view all the flashcards

Handling 'Heavy' Bags

He should get a sense of the bag's weight first by pushing it and asking for assistance if necessary

Signup and view all the flashcards

Securing Empty Cargo Pits

Even if cargo pit 2 will remain empty during the flight, the cargo pit nets must still be fastened across the cargo area.

Signup and view all the flashcards

Aircraft with Two Cargo Compartments and Six Pits

The B757

Signup and view all the flashcards

Hand signal to bring aircraft to a designated stop mark?

Normal Stop

Signup and view all the flashcards

Segregating bags.

Use ULD containers since they have a hold more bags.

Signup and view all the flashcards

Purpose of FOD Check

To ensure the Operational Safety Zone is clear of any objects that can be ingested or taxied over.

Signup and view all the flashcards

Operating Motorized GSE Safety

Always keep all body parts inside the Ground Service Equipment.

Signup and view all the flashcards

When To Give Safe To Approach Signal

When the nose wheel is properly chocked, engines are off and spooling down, and beacon light is off

Signup and view all the flashcards

Marshaller Responsibility

Ensure safe arrival of the aircraft to the gate area.

Signup and view all the flashcards

Cargo Ceiling Clearance

A minimum ceiling clearance of two inches must be maintained to prevent blocking of the fire suppression system with all of our aircraft.

Signup and view all the flashcards

Meaning of Red Unserviceable Tag

Ared tag means the GSE is unsafe to use.

Signup and view all the flashcards

Safety Stop Requirement

When approaching the edge of the Operational Safety Zone.

Signup and view all the flashcards

More Like This

Quiz sobre el parqueo de aeronaves
10 questions

Quiz sobre el parqueo de aeronaves

AccessibleRainbowObsidian avatar
AccessibleRainbowObsidian
Aircraft Maintenance Basics
20 questions
Aircraft ATA Chapters Flashcards
11 questions
Use Quizgecko on...
Browser
Browser